Bromide, Br, adsorption behavior was investigated on amorphous Al and Fe oxide, montmorillonite, kaolinite, and temperate and tropical soils. Bromide adsorption decreased with increasing solution pH with minimal adsorption occurring above pH 7. Bromide adsorption was higher for amorphous oxides than for clay minerals. Shifts in point of zero charge (PZC) were observed on amorphous Al and Fe oxide following Br adsorption, suggesting an inner-sphere adsorption mechanism for Br on these surfaces. Ionic strength effects indicated an inner-sphere adsorption mechanism for Br on kaolinite and an outer-sphere adsorption mechanism on amorphous Fe oxide. Two chemical surface complexation models, the constant capacitance model and the triple layer model, were able to describe Br adsorption as a function of solution pH on all materials. For the oxides and clay minerals and most of the soils the fit of the constant capacitance model, containing an inner-sphere adsorption mechanism, was improved over that of the triple layer model, containing an outer-sphere adsorption mechanism, as measured by the overall variance, VY. Bromide adsorption on amorphous Fe oxide as a function of solution pH and solution ionic strength was well described using the triple layer model. Our results indicate that Br would most likely not act as a conservative tracer at soil solution pH values below 7. Therefore, we suggest that researchers carefully evaluate the pH regime and mineralogy of their study site before assuming that Br can be applied as a conservative tracer for transport experiments.

You do not have access to this content, please speak to your institutional administrator if you feel you should have access.