Forties is a giant North Sea oil field with an estimated 4.2 billion to 5 billion barrels of oil initially in place. The field has been producing since 1975 and by year-end 2015 had produced more than 2.7 billion barrels of cumulative oil production. The peak production rate exceeded more than 500,000 barrels of oil per day (BOPD) in 1979, and since then more than 3.8 billion barrels of water have been injected into the field. The majority of the field is now water swept due to the combined effect of water injection and extensive depletion supported by a large underlying aquifer. The ability to identify the few remaining unswept portions of the reservoir has elevated 4D seismic into a key technology to derisk all new wells drilled at Forties. The types of 4D targets at Forties are ever-evolving as continuous improvements in seismic acquisition and processing technologies deliver higher quality time-lapse seismic data. With every subtle improvement in 4D repeatability, additional and sometimes unexpected information about the reservoir has come to light. Historically the primary and most robust 4D effect was an increase in impedance (i.e., a “hardening” effect), which could be mapped confidently to identify areas where water was replacing oil. As 4D repeatability improved, it became evident that a decrease in impedance (i.e., a “softening” effect) was observed in many areas in the reservoir. Further analysis revealed that this type of 4D response was highlighting areas where oil had resaturated previously swept reservoir, forming a new type of infill target in the Forties portfolio called resaturation targets. Since drilling the first 4D resaturation target in 2011, 22 of these targets have been drilled with an 86% success rate, delivering 15 million barrels of new oil production from the Forties Field.

You do not have access to this content, please speak to your institutional administrator if you feel you should have access.