ABSTRACT

Seismic waveforms from the Eastern Tennessee Seismic Network are corrected to the nominal Wood–Anderson (WA) torsion seismometer to obtain a total of 11,905 maximum trace amplitudes from 690 events seen on 50 different horizontal components to determine a local magnitude scale for the Eastern Tennessee Seismic Zone (ETSZ). We use the following distance‐correction function −log10(A0)=0.538(r/17)−0.0002516(r−17)+2.0, in which A0 is the maximum amplitude measured in millimeters and r is the hypocentral distance measured in kilometers; this better agrees with reported moment magnitudes for larger events in the ETSZ. Using the normal 100 km distance for ML normalization severely overestimates ML, and we therefore chose to adopt the 17 km normalization technique. The −log10(A0) is very flat at distances >200  km, suggesting unusually low distance attenuation at local and near‐regional distances from the ETSZ. The WA response reported by the International Association of Seismology and Physics of the Earth’s Interior to the nominal response shows no significant difference in the distance‐dependent factor for the logA0 term, although the revised response consistently yields ML values that are 0.1 lower than those found using the nominal response. The b‐values for the currently reported duration magnitude are lower than the b‐values obtained using the newly calculated ML scale. The relationship between ML and MD can be expressed as ML=0.68093MD+0.64603. The catalog of events used in this study is complete for ML>1.3.

You do not currently have access to this article.