ABSTRACT Utah (USA) is naturally gifted with bountiful geothermal energy resources. Located along the eastern boundary of the Great Basin, a physiographic region with abundant geothermal heat close to Earth’s surface, Utah’s geothermal resources are a product of several large-scale geologic processes working together: regional hydrological systems flush water from high mountain ranges through adjacent lowlands, accommodated by heavily fractured bedrock and (still active) crustal-scale faults that bound each valley, and sweep geothermal energy from a nearly limitless supply of deep subsurface heat radiating from a relatively shallow intracontinental mantle and geologically recent volcanic intrusive suites. Intended for students and working professionals alike, this field trip showcases a wide range of geothermal resources that are in different phases of exploration and/or development, from established geothermal power plants operating within traditional hydrothermal systems since the 1980s, to world-class, natural field laboratories where experimental technologies are being developed to engineer efficient closed-system fracture sets within hot rock bodies, to emergent geothermal resource leads at the very beginning of subsurface characterization to assess their true resource potential. Field-trip attendees will explore the Black Rock Desert, visit two different working geothermal power plants, tour the U.S. Department of Energy–funded Frontier Observatory for Research in Geothermal Energy (FORGE) site for Enhanced Geothermal Systems research, investigate a siliceous sinter deposit at the Opal Mound fault zone, experience scenic drives through Utah’s Renewable Energy Corridor, and learn ways in which geoscientists conduct geothermal energy resource assessments in areas with strong blind/hidden geothermal resource potential.

Abstract Gold is either the only economically important metal or a major by-product in 11 well-characterized deposit types—paleoplacer, orogenic, porphyry, epithermal, Carlin, placer, reduced intrusion related, volcanogenic massive sulfide (VMS), skarn, carbonate replacement, and iron oxide-copper-gold (IOCG), arguably more than for those of any other metal; it also dominates a number of deposits of uncertain or unknown origin. Major gold concentrations formed worldwide from the Mesoarchean to the Pleistocene, from Earth’s surface to midcrustal paleodepths, alone or in association with silver, base metals, and/or uranium, and from hydrothermal fluids of predominantly metamorphic, magmatic, meteoric, seawater, or, uncommonly, basinal origins, as well as from mafic magma or ambient surface water. Most of the Neoproterozoic and Phanerozoic deposits unequivocally formed in accretionary orogens. As an introduction to this compilation of the world’s major gold deposits and provinces, this paper provides a thumbnail sketch of each gold deposit type, including geologic and economic characteristics and widely accepted genetic models, as well as briefly discusses aspects of their spatial and temporal associations and distributions.

Abstract The Malartic gold camp is located in the southern part of the Archean Superior Province and straddles the Larder Lake-Cadillac fault zone that is between the Abitibi and Pontiac subprovinces. It comprises the world-class Canadian Malartic deposit (25.91 Moz, including past production, reserves, and resources), and smaller gold deposits located along faults and shear zones in volcanic and metasedimentary rocks of the Abitibi subprovince. North of the Larder Lake-Cadillac fault zone, the Malartic camp includes 2714 to 2697 Ma volcanic rocks and ≤2687 Ma turbiditic sedimentary rocks overlain by ≤2679 to 2669 Ma polymictic conglomerate and sandstone of the Timiskaming Group. South of the fault, the Pontiac subprovince comprises ≤2685 Ma turbiditic graywacke and mudstone, and minor ultramafic to mafic volcanic rocks and iron formations of the Pontiac Group. These supracrustal rocks were metamorphosed at peak greenschist to lower amphibolite facies conditions at ~2660 to 2658 Ma, during D 2 compressive deformation, and are cut by a variety of postvolcanic intrusions ranging from ~2695 to 2640 Ma. The Canadian Malartic deposit encompasses several past underground operations and is currently mined as a low-grade, open-pit operation that accounts for about 80% of the past production and reserves in the camp. It dominantly consists of disseminated-stockwork replacement-style mineralization in greenschist facies sedimentary rocks of the Pontiac Group. The mineralized zones are spatially associated with the Sladen fault and ~2678 Ma subalkaline to alkaline porphyritic quartz monzodiorite and granodiorite. Field relationships and isotopic age data for ore-related vein minerals indicate that gold mineralization in the Canadian Malartic deposit occurred at ~2665 to 2660 Ma and was contemporaneous with syn- to late-D 2 peak metamorphism. The smaller deposits in the camp include auriferous disseminated-stockwork zones of the Camflo deposit (1.9 Moz) and quartz ± carbonate-pyrite veins and breccias (0.6 Moz) along faults in chemically and mechanically favorable rocks. The age of these deposits is poorly constrained, but ~2692 Ma postmineral dikes, and ~2625 Ma hydrothermal titanite and rutile from the Camflo deposit highlight a long and complex hydrothermal history. Crosscutting relationships and regional geochronological constraints suggest that an early episode of pre-Timiskaming mineralization occurred at >2692 Ma, shortly after the end of volcanism in the Malartic camp, and postmetamorphic fluid circulation may have contributed to concentration or remobilization of gold until ~2625 Ma. However, the bulk of the gold was concentrated in the Canadian Malartic deposit during the main phase of compressive deformation and peak regional metamorphism.

Abstract The Timmins-Porcupine camp, with >2,190 metric tons Au (70.5 Moz) produced between 1906 and 2019, is the world’s largest Archean orogenic gold camp. The gold deposits of the camp are distributed over ~50 km of strike length along the Destor-Porcupine fault zone. This includes the world-class Hollinger-McIntyre and Dome deposits, which represent archetypal examples of large orogenic quartz-carbonate gold systems. The Dome deposit, where the ore is centered on a folded unconformity between Tisdale volcanic rocks and Timiskaming sedimentary units, also illustrates the spatial relationship between large gold deposits and a regional unconformity. Ore-forming hydrothermal activity in the camp spanned a prolonged period of time, as illustrated by early-stage, low-grade ankerite veins formed between ca. 2690 and 2674 Ma. This was prior to or very early relative to the development of the regional unconformity and sedimentation of the Timiskaming assemblage, and subsequent main-stage gold deposition. The bulk of the gold in the district is younger than the Three Nations Formation of the upper part of the Timiskaming assemblage (i.e., ≤2669 ± 1 Ma) and was deposited syn- to late-main phase of shortening (D 3) in the Timmins-Porcupine camp from about 2660 to 2640 ± 10 Ma. The early carbonatization represents a significant early-stage hydrothermal event in the formation of large structurally controlled gold deposits such as Dome and illustrates the protracted nature of the large-scale CO 2 -rich metasomatism occurring before and during gold deposition. Ores in the Timmins-Porcupine camp mainly consist of networks of steeply to moderately dipping fault-fill quartz-carbonate ± tourmaline ± pyrite veins and associated extensional, variably deformed, shallowly to moderately dipping arrays of sigmoidal veins hosted in highly carbonatized and sericitized rocks and formed during main regional shortening (D 3). In contrast, at the Timmins West mine, the Thunder Creek and 144 GAP deposits are early- to syn-Timiskaming intrusion-associated deposits that slightly predate to overlap the main phase of D 3 horizontal shortening in which the associated intrusions mainly played a passive role as an older mechanical and chemical trap rock. The formation of the gold deposits of the Timmins-Porcupine camp is due to several key factors. The Destor-Porcupine fault zone represents a deeply rooted first-order structure and tapped auriferous metamorphic fluids and melts from the upper mantle-lower crust. The fault zone has channeled large volumes of auriferous H 2 O-CO 2 -rich fluids to the upper crust late in the evolution of the belt. Several of the gold deposits of the camp are spatially associated with the regional Timiskaming unconformity. The current level of erosion is deep enough to expose the unconformity and to maximize the chance of discovering the quartz-carbonate style of orogenic deposits or the associated hydrothermal footprint, but also allowed for preservation of at least part of the gold deposits that are mainly hosted in the highly reactive Fe-rich basalt of the Tisdale assemblage. Additional key factors include the presence of komatiitic and/or basaltic komatiite flows, competent pre- and syn-Timiskaming subalkaline and alkaline intrusions that predate the main phase of shortening, and the occurrence of a flexure in the trace of the Destor-Porcupine fault zone that may have further facilitated and focused the ore-forming fluid upflow in the most endowed part of the camp. The complex structural and rheological discontinuities, competency contrasts, and early-stage folds with associated fracture and fault netorks in the camp provided highly favorable ground-preparation conditions.

Abstract Hemlo combines several rare to unique features in the spectrum of Archean greenstone gold deposits. It is an isolated, approximately 800-metric ton (t) gold system in a region of otherwise limited known gold endowment. The geology of Hemlo is dominated by deformed and metamorphosed sedimentary, felsic volcanic, and volcaniclastic units, a premineral coherent felsic porphyry, and a swarm of mainly postmineral, intermediate, feldspar-phyric dikes. Ore is dominantly in the form of gold-bearing lenses of pyritic, feldspathic schist derived from deformation of both the clastic rocks and the felsic porphyry. The deposit and its host rocks were metamorphosed at moderate pressures to assemblages diagnostic of the mid-amphibolite facies, followed by progressive retrogression to those of the greenschist facies. The result is a wide range of silicate mineral species in ambiguous textural relationships. The gold system itself is known for ore and related alteration minerals with significant concentrations of Mo-As-Sb-Hg-Tl-V-Ba-K-Na. The inferences derived from lithologic mapping, structural chronology, U-Pb geochronology, and mineral paragenesis favors an interpretation of Hemlo as a deformed and metamorphosed gold system formed from oxidized hydrothermal fluids in an upper crustal setting. Uncertainty remains as to the exact nature and geometry of that ore-forming hydrothermal system, however, and the role subsequent metamorphism and deformation have played in the local remobilization of ore constituents into their present paragenetically late structural sites.

Abstract The Paracatu deposit in Brazil is a shallowly dipping, bulk-tonnage, low-grade, vein-style orogenic Au orebody hosted in very strongly deformed Neoproterozoic carbonaceous phyllite of the southern Brasília fold belt. At regional to district scales, the gold orebody lies along the eastern, hanging-wall edge of a major thrust of the ~630 Ma Brasiliano orogeny. This thrust cuts through a facies transition between clastic-dominated rocks of the Canastra Group and carbonate-dominant rocks of the Vazante Group, deposited at ~1000 Ma in a rift to passive-margin environment on the flank of the São Francisco craton. At the same scales, the footwall of this major thrust system hosts numerous structurally controlled zinc deposits including Vazante and Morro Agudo. At Paracatu, ore genesis occurred primarily by the formation of early tectonic quartz sulfide-carbonate veins, prior to substantial ductile deformation (boudinage), local physico-chemical reworking of these veins, and redistribution of some gold. Structural, geochemical, and isotopic data indicate a strong influence of the local rocks (cm to 100-m scales) on many ore ingredients, and the quartz and carbonate in ore veins were most likely derived locally (cm to m scales). However, the coassociation of gold and arsenic with the boudinaged veins and a major thrust, and the absence of metal enrichments normally associated with syngenetic metalliferous black shales, supports a model of far-field derivation of gold within this metasedimentary package (km to 10-km scales). Transport of metal-bearing fluids toward a favorable structural and chemical site during thrusting and orogenesis was possibly focused, during precipitation to ore grades, by the position of transverse structures in the basement, which also influenced deposition of the adjacent zinc deposits. Successful mining of the low-grade resource was initially favored by the subhorizontal orebody geometry and weathering characteristics, and subsequently by high production rates from the 100-m-thick mineralized zone.

Abstract Obuasi, with a total mineral resource plus past production of 70 Moz, is the largest gold deposit in West Africa, and one of the largest in the world. It is hosted by ~2135 Ma siliciclastic rocks of the Eburnean Kumasi Basin, which were obliquely shortened along an inverted boundary with the older Eoeburnean Ashanti belt to the east. Greenschist facies metamorphism was coeval with mineralization and related alteration at ~2095 Ma. The steeply dipping, ENE-plunging lodes extend over an 8-km strike length and to depths of >2.5 km. They include paragenetically complex gold-rich quartz veins surrounded by refractory auriferous arsenopyrite and closely associated carbonate-muscovite alteration halos in deformed carbonaceous phyllites and subordinate metaigneous host rocks. Gold and arsenic were initially precipitated during deformation-assisted interaction with reduced host rocks at ~350°C and 100 to 200 MPa. The mineralizing fluids were derived primarily from deeper, As-rich metasedimentary sources by basinal fluid expulsion and metamorphic devolatilization triggered by inversion and shortening, followed by transpression. Continued fluid injection during and after the metamorphic peak produced changes in gold fineness, sulfide assemblages, repeated dissolution (stylolites) and reprecipitation of mineralized veins, and a change from early deformed shear-related, sulfide-rich lodes to later quartz-rich lodes that plunge down or across the axes of younger transpressional folds. Channelized fluid flow due to reactivation of basin-edge transfer structures, and/or irregularly distributed gold source rocks, may explain the variation in gold endowment along the former basin boundary.

Abstract Paleoproterozoic (Rhyacian) gold deposits of the Loulo district in western Mali contain >17 million ounces (Moz) Au and form part of the second most highly endowed region within West Africa. The deposits are located within siliciclastic, marble, and evaporitic rocks of the ca. 2110 Ma greenschist facies Kofi series, which were folded and inverted between ca. 2100 and 2070 Ma, prior to gold mineralization. Deposits at Yalea and Gounkoto are located along discontinuous, low-displacement, albite- and carbonate-altered shear zones, whereas Gara is confined to a tourmaline-altered quartz sandstone unit. Lodes typically plunge gently to moderately, reflecting the attitude of folds in the adjacent rocks and bends in the host shear zones, both of which influenced their location. Gold mineralization in the Loulo district was broadly synchronous with emplacement of the Falémé batholith and associated Fe skarn mineralization, which intrude and overprint the western margin of the Kofi series, respectively. However, hydrothermal fluids generated during metamorphic devolatilization of the Kofi series rocks appear responsible for gold mineralization, albeit within a district-wide thermal gradient associated with emplacement of the Falémé batholith. The regional-scale Senegal-Mali shear zone, commonly cited as an important control on the location of gold deposits in western Mali, is absent in the Loulo district.

Abstract The Geita mine is operated by AngloGold Ashanti and currently comprises four gold deposits mined as open pits and underground operations in the Geita greenstone belt, Tanzania. The mine produces ~0.5 Moz of gold a year and has produced ~8.3 Moz since 2000, with current resources estimated at ~6.5 Moz, using a lower cut-off of 0.5 g/t. The geologic history of the Geita greenstone belt involved three tectonic stages: (I) early (2820–2700 Ma) extension (D 1) and formation of the greenstone sequence in an oceanic plateau environment; (II) shortening of the greenstone sequence (2700–2660 Ma) involving ductile folding (D 2–5) and brittle-ductile shearing (D 6), coincident with long-lived igneous activity concentrated in five intrusive centers; and (III) renewed extension (2660–2620 Ma) involving strike-slip and normal faulting (D 7–8), basin formation, and potassic magmatism. Major gold deposits in the Geita greenstone belt formed late in the history of the greenstone belt, during D 8 normal faulting at ~2640 Ma, and the structural framework, mineral paragenesis, and timing of gold precipitation is essentially the same in all major deposits. Gold is hosted in iron-rich lithologies along contacts between folded metaironstone beds and tonalite-trondhjemite-granodiorite (TTG) intrusions, particularly where the contacts were sheared and fractured during D 6–7 faulting. The faults, together with damage zones created along D 3 fold hinges and D 2–3 hydrothermal breccia zones near intrusions, formed microfracture networks that were reactivated during D 8 . The fracture networks served as conduits for gold-bearing fluids; i.e., lithologies and structures that trap gold formed early, but gold was introduced late. Fluids carried gold as Au bisulfide complexes and interacted with Fe-rich wall rocks to precipitate gold. Fluid-rock interaction and mineralization were enhanced as a result of D 8 extension, and localized hydrofracturing formed high-grade breccia ores. Gold is contained in electrum and gold-bearing tellurides that occur in the matrix and as inclusions in pyrrhotite and pyrite. The gold mineralization is spatially linked to long-lived, near-stationary intrusive centers. Critical factors in forming the deposits include the (syn-D 2–6) formation of damage zones in lithologies that enhance gold precipitation (Fe-rich lithologies); late tectonic reactivation of the damage zones during extensional (D 8) faulting with the introduction of an S-rich, gold-bearing fluid; and efficient fluid-rock interaction in zones that were structurally well prepared.

Abstract The Kibali district in the Democratic Republic of Congo hosts the large Karagba-Chaffeur-Durba (KCD) deposit and smaller satellite deposits that together contained 20 million ounces (Moz) of gold when mining recommenced in 2013. An additional 3 Moz of gold was probably mined from the district before 2013. Gold deposits in the Kibali district are located along the KZ trend, a series of folds, contractional shear zones, and altered lithostratigraphic units that coincide with the margin of an earlier 2630 to 2625 Ma intraorogenic basin within the Neoarchean Moto belt. Fluids first responsible for barren carbonate-quartz-sericite alteration, and later for siderite and/or ankerite (±quartz, magnetite, pyrite, and/or chlorite) alteration with associated auriferous pyrite ± rare arsenopyrite veinlets, infiltrated and replaced the siliciclastic, banded iron formation (BIF), and chert host rocks via fold axes, shear zones, and reactive BIF horizons. The complex shape and gentle northeast plunge of the lodes across the Kibali district reflect the shape and plunge of coincident folds that formed during early barren alteration. Many other folded BIF horizons across the wider Moto belt remain barren or only weakly mineralized, suggesting deep extensional structures that may have developed in the vicinity of the KZ trend during basin opening and prior to gold mineralization, were important fluid pathways during later contractional deformation and mineralization.

Abstract The Olympiada deposit, containing >1,560 metric tons (t; 50 Moz) of gold at an average grade of 4 to 4.6 g/t Au, occurs in central Siberia, Russia. Over 30 years, the deposit produced more than 580 t of gold, including 200 t from oxidized ore grading 11.1 g/t. The deposit forms a 2-km-long, steeply dipping system, which is traced downdip for 1.7 km. It occurs in the Neoproterozoic orogen of the Yenisei Ridge at the western margin of the Siberian craton. This and other gold deposits in the district are controlled by the large, long-lived Tatarka-Ishimbino tectonic zone, marking a suture between terranes chiefly consisting of deformed Meso- to Neoproterozoic carbonate-clastic sedimentary rocks. The combination of lithologic and structural factors was critical for localization of gold mineralization associated with calcic and siliceous alteration accompanied by early arsenic and late antimony sulfides. As a result, very fine (10 μ m) and high fineness (910–997) gold associates with diverse sulfides, especially arsenopyrite, and commonly contains mercury, similar to some characteristics of Carlin-type deposits. Geochronologic studies suggest that mineralization was formed during several stages between 817 and 660 Ma. The isotopic composition of Os and He, along with presence of anomalous Ni, Co, and Pt, points to a mantle mafic source, whereas isotopic composition of Pb and S suggest a contaminated crustal source, i.e., originating from a mix of mantle and crustal fluids.

Abstract The giant (>20 Moz) Telfer Au-Cu deposit is located in the Paterson Province of Western Australia and is hosted by complexly deformed marine Neoproterozoic metasedimentary siltstones and quartz arenites. The Telfer district also contains magnetite- and ilmenite-series granitoids dated between ca. 645 and 600 Ma and a world-class W skarn deposit associated with the reduced, ~604 Ma O’Callaghans granite. Based on monazite and xenotime U-Pb geochronology, Telfer is estimated to be older than O’Callaghans, forming between 645 and 620 Ma. Au-Cu mineralization at Telfer is hosted in multistage, bedding-parallel quartz-dolomite-pyrite-chalcopyrite reefs and related discordant veins and stockworks of similar composition that were emplaced into two NW-striking doubly plunging anticlines or domes. Mineralization is late orogenic in timing, with hot (≤460°C), saline (<50 wt % NaCl equiv) ore fluids channeled into preexisting domes along a series of shallow, ENE-verging thrust faults and associated fault-propagated fold corridors. A combination of fault-propagated fold corridors acting as fluid conduits below the apex of the Telfer domes and the rheology and chemical contrast between interbedded siltstone and quartz arenite units within the dome are considered key parameters in the formation of the Telfer deposit. Based on the presence of the reduced Au-Cu-W-Bi-Te-Sn-Co-As assemblage, saline and carbonic, high-temperature hydrothermal fluids in Telfer ore, and widespread ilmenite-series granites locally associated with W skarn mineralization, Telfer is considered to be a distal, intrusion-related gold deposit, the high copper content of which may be explained by the predominance of highly saline, magmatic fluids in gangue assemblages cogenetic with ore.

Abstract The Kalgoorlie gold camp in the Yilgarn craton of Western Australia comprises the supergiant Golden Mile and the smaller Mt. Charlotte, Mt. Percy, and Hidden Secret deposits. Since the camp’s discovery in 1893, ~1,950 metric tons (t) of Au have been produced from a total estimated endowment of ~2,300 t. The camp is located within Neoarchean rocks of the Kalgoorlie terrane, within the Eastern Goldfields superterrane of the eastern Yilgarn craton. Gold mineralization is distributed along an 8- × 2-km, NNW-trending corridor, which corresponds to the Boulder Lefroy-Golden Mile fault system. The host stratigraphic sequence, dated at ca. 2710 to 2660 Ma, comprises lower ultramafic and mafic lava flow rocks, and upper felsic to intermediate volcaniclastic, epiclastic, and lava flow rocks intruded by highly differentiated dolerite sills such as the ca. 2685 Ma Golden Mile Dolerite. Multiple sets of NNW-trending, steeply dipping porphyry dikes intruded this sequence from ca. 2675 to 2640 Ma. From ca. 2685 to 2640 Ma, rocks of the Kalgoorlie gold camp were subjected to multiple deformation increments and metamorphism. Early D 1 deformation from ca. 2685 to 2675 Ma generated the Golden Mile fault and F 1 folds. Prolonged sinistral transpression from ca. 2675 to 2655 Ma produced overprinting, NNW-trending sets of D 2 -D 3 folds and faults. The last deformation stage (D 4 ; < ca. 2650 Ma) is recorded by N- to NNE-trending, dextral faults which offset earlier structures. The main mineralization type in the Golden Mile comprises Fimiston lodes: steeply dipping, WNW- to NNW-striking, gold- and telluride-bearing carbonate-quartz veins with banded, colloform, and crustiform textures surrounded by sericite-carbonate-quartz-pyrite-telluride alteration zones. These lodes were emplaced during the earlier stages of regional sinistral transpression (D 2) as Riedel shear-type structures. During a later stage of regional sinistral transpression (D 3), exceptionally high grade Oroya-type mineralization developed as shallowly plunging ore shoots with “Green Leader” quartz-sericite-carbonate-pyrite-telluride alteration typified by vanadium-bearing muscovite. In the Hidden Secret orebody, ~3 km north-northwest of the Golden Mile, lode mineralization is a silver-rich variety characterized by increased abundance of hessite and petzite and decreased abundance of calaverite. At the adjacent Mt. Charlotte deposit, the gold-, silver-, and telluride-bearing lodes become subordinate to the Mt. Charlotte-type stockwork veins. The stockwork veins occur as planar, 2- to 50-cm thick, auriferous quartz-carbonate-sulfide veins that define steeply NW- to SE-dipping and shallowly N-dipping sets broadly coeval with D 4 deformation. Despite extensive research, there is no consensus on critical features of ore formation in the camp. Models suggest either (1) distinct periods of mineralization over a protracted, ca. 2.68 to 2.64 Ga orogenic history; or (2) broadly synchronous formation of the different types of mineralization at ca. 2.64 Ga. The nature of fluids, metal sources, and mineralizing processes remain debated, with both metamorphic and magmatic models proposed. There is strong evidence for multiple gold mineralization events over the course of the ca. 2.68 to 2.64 orogenic window, differing in genesis and contributions from either magmatic or metamorphic ore-forming processes. However, reconciling these models with field relationships and available geochemical and geochronological constraints remains difficult and is the subject of ongoing research.

Abstract Boddington is a giant, enigmatic, and atypical Archean Au-Cu deposit hosted in a small, remnant greenstone belt within granite-gneiss and migmatite of the Southwest terrane of the Yilgarn craton, Western Australia. Primary Au and Cu (and Mo) mineralization consists of a network of thin fractures and veins, controlled by shear zones, and dominantly hosted by early dioritic intrusions and their immediate wall rocks, which comprise felsic to intermediate-composition volcanic and volcaniclastic rocks. The pre-~2714 Ma host rocks are typically steeply dipping and strongly deformed, with early ductile and overprinting brittle-ductile fabrics, and have been metamorphosed at mid- to upper greenschist facies. Features consistent with porphyry-style mineralization, classic orogenic shear zones, and intrusion-related Au-Cu-Bi mineralization are all recognized, giving rise to a variety of genetic interpretations. It is clear that Boddington does not fit any classic Archean orogenic gold deposit model, having a general lack of quartz veins and iron carbonate alteration, a Cu (Mo and Bi) association, zoned geochemical anomalism, and evidence of high-temperature, saline ore-forming fluids. Detailed petrographic, geochemical, and melt inclusion studies suggest a late-stage ~2612 Ma, monzogranite intrusion as one of the principal sources of the mineralizing fluids. However, there is also local evidence for older, perhaps protore, porphyry-style Cu (±Au) in the dioritic intrusions and patchy, locally high-grade, orogenic-style gold mineralization associated with enclosing shear zones and brittle-style deformation, which was focused on the relatively competent dioritic intrusions. The relative contributions of metals from these components to the system may not be resolvable. It appears that the Boddington deposit has been a locus for multiple episodes of intrusion, alteration, and mineralization over an extended period of time, as has been demonstrated in a number of other large Canadian and Australian gold deposits, including the Golden Mile near Kalgoorlie.

Abstract The Brucejack intermediate-sulfidation epithermal Au-Ag deposit, located 65 km north of Stewart, BC, forms part of a well-mineralized, structurally controlled, north-south gossanous trend associated with Early Jurassic intrusions straddling the Late Triassic-Early Jurassic Stuhini-Hazelton Group unconformity in the Sulphurets mineral district. Mining of the deposit commenced in mid-2017 after a long history of exploration dating back to the 1880s. Mineralization is hosted in deformed Lower Jurassic island-arc volcanic rocks of the Hazelton Group exposed on the eastern limb of the Cretaceous McTagg anticlinorium. High-grade Au-Ag mineralization was formed from ~184 to 183 Ma in association with a telescoped, multipulsed magmatic-hydrothermal system beneath an active local volcanic center. Precious metal mineralization occurs as coarse aggregates of electrum and silver sulfosalts in steeply dipping, E- to SE-trending quartz-carbonate vein stockwork zones cutting low-grade intrusion-related phyllic alteration. Epithermal vein development is interpreted to have occurred during the waning stages of Early Jurassic sinistral transpression in a compressive arc environment, followed by a limited Cretaceous deformation overprint.

Abstract The Eocene Goldstrike system on the Carlin Trend in Nevada is the largest known Carlin-type gold system, with an endowment of 58 million ounces (Moz) distributed among several coalesced deposits in a structural window of gently dipping carbonate rocks below the regional Roberts Mountains thrust. The 3.5- × 2.5-km Goldstrike system is bounded to the east by the Post normal fault system and to the south by the Jurassic Goldstrike diorite stock and is partly hosted in the favorable slope-facies apron of the Bootstrap reef margin that passes through the system. The carbonate and clastic sedimentary sequence is openly folded, cut by sets of reverse and normal faults, and intruded by the Jurassic Goldstrike stock and swarms of Jurassic and Eocene dikes, establishing the structural architecture that controlled fluid flow and distribution of Eocene mineralization. A proximal zone of permeability-enhancing decarbonatization with anomalous gold (>0.1 ppm) extends a few hundreds of meters beyond the ore footprint and lies within a carbonate δ 18 O depletion anomaly extending ~1.4 km farther outboard. The full extent of the larger hydrothermal system hosting Goldstrike and adjacent deposits on the northern Carlin Trend is outlined by a 20- × 40-km thermal anomaly defined by apatite fission-track analyses. The bulk of the mineralization is hosted in decarbonatized sedimentary units with elevated iron contents and abundant diagenetic pyrite relative to background. Gold is associated with elevated concentrations of As, Tl, Hg, and Sb, and occurs in micron-sized arsenian pyrite grains or in arsenian pyrite overgrowths on older, principally diagenetic pyrite, with sulfidation of available iron as the main gold precipitation mechanism. The intersection of a swarm of Jurassic lamprophyre dikes with the edge of the limestone reef provided a favorable deeply penetrating structural conduit within which a Jurassic stock acted as a structural buttress, whereas the reef’s slope-facies apron of carbonate units, with high available iron content, provided a fertile setting for Carlin-type mineralization. The onset of Eocene extension coupled with a southwestward-sweeping Cenozoic magmatic front acted as the trigger for main-stage gold mineralization at 40 to 39 Ma. All these factors contributed to the exceptional size and grade of Goldstrike.

Abstract The Cortez district is in one of the four major Carlin-type gold deposit trends in the Great Basin province of Nevada and contains three giant (>10 Moz) gold orebodies: Pipeline, Cortez Hills, and Goldrush, including the recently discovered Fourmile extension of the Goldrush deposit. The district has produced >21 Moz (653 t) of gold and contains an additional 26 Moz (809 t) in reserves and resources. The Carlin-type deposits occur in two large structural windows (Gold Acres and Cortez) of Ordovician through Devonian shelf- and slope-facies carbonate rocks exposed through deformed, time-equivalent lower Paleozoic siliciclastic rocks of the overlying Roberts Mountains thrust plate. Juxtaposition of these contrasting Paleozoic strata occurred during the late Paleozoic Antler orogeny along the Roberts Mountains thrust. Both upper and lower plate sequences were further deformed by Mesozoic compressional events. Regional extension, commencing in the Eocene, opened high- and low-angle structural conduits for mineralizing solutions and resulted in gold deposition in reactive carbonate units in structural traps, including antiforms and fault-propagated folds. The Pipeline and Cortez Hills deposits are located adjacent to the Cretaceous Gold Acres and Jurassic Mill Canyon granodioritic stocks, respectively; although these stocks are genetically unrelated to the later Carlin-type mineralization event, their thermal metamorphic aureoles may have influenced ground preparation for later gold deposition. Widespread decarbonatization, argillization, and silicification of the carbonate host rocks accompanied gold mineralization, with gold precipitated within As-rich rims on fine-grained pyrite. Pipeline and Cortez Hills also display deep supergene oxidation of the hypogene sulfide mineralization. Carlin-type mineralization in the district is believed to have been initiated in the late Eocene (>35 Ma) based on the age of late- to postmineral rhyolite dikes at Cortez Hills. The Carlin-type gold deposits in the district share common structural, stratigraphic, alteration, and ore mineralogic characteristics that reflect common modes of orebody formation. Ore-forming fluids were channeled along both low-angle structures (Pipeline, Goldrush/Fourmile) and high-angle features (Cortez Hills), and gold mineralization was deposited in Late Ordovician through Devonian limestone, limy mudstone, and calcareous siltstone. The Carlin-type gold fluids are interpreted to be low-salinity (2–3 wt % NaCl equiv), low-temperature (220°–270°C), and weakly acidic, analogous to those in other Carlin-type gold deposits in the Great Basin. The observed characteristics of the Cortez Carlin-type gold deposits are consistent with the recently proposed deep magmatic genetic model. Although the deposits occur over a wide geographic area in the district, it is possible that they initially formed in greater proximity to each other and were then spatially separated during Miocene and post-Miocene regional extension.