Abstract This field guide focuses on the glacial geology and paleoecology beginning in the Paradise Valley and progressing southward into northern Yellowstone National Park. During the last (Pinedale) glaciation, the northern Yellowstone outlet glacier flowed out of Yellowstone Park and down the Yellowstone River Valley into the Paradise Valley. The field trip will traverse the following Pinedale glacial sequence: (1) deposition of the Eightmile terminal moraines and outwash 16.5 ± 1.4 10 Be ka in the Paradise Valley; (2) glacial recession of ~8 km and deposition of the Chico moraines and outwash 16.1 ± 1.7 10 Be ka; (3) glacial recession of 45 km to near the northern Yellowstone boundary and moraine deposition during the Deckard Flats readjustment 14.2 ± 1.2 10 Be ka; and (4) glacial recession of ~37 km and deposition of the Junction Butte moraines 15.2 ± 1.3 10 Be ka (this age is a little too old based on the stratigraphic sequence). Yellowstone's northern range of sagebrush-grasslands and bison, elk, wolf, and bear inhabitants is founded on glacial moraines, sub-glacial till, and outwash deposited during the last glaciation. Floods released from glacially dammed lakes and a landslide-dammed lake punctuate this record. The glacial geologic reconstruction was evaluated by calculation of basal shear stress, and yielded the following values for flow pattern in plan view: strongly converging—1.21 ± 0.12 bars (n = 15); nearly uniform—1.04 ± 0.16 bars (n = 11); and strongly diverging—0.84 ± 0.14 bars (n = 16). Reconstructed mass balance yielded accumulation and ablation each of ~3 km 3 /yr, with glacial movement near the equilibrium line altitude dominated by basal sliding. Pollen and charcoal records from three lakes in northern Yellowstone provide information on the postglacial vegetation and fire history. Following glacial retreat, sparsely vegetated landscapes were colonized first by spruce parkland and then by closed subalpine forests. Regional fire activity increased significantly with the development of closed subalpine forests as a result of increased fuel biomass and warmer summers. Warm dry conditions prevailed at low elevations during the early Holocene, as indicated by the presence of steppe and open mixed conifer forest. At the same time, closed subalpine forests with low fire frequency were present at higher elevations, suggesting relatively wet summer conditions. Douglas fir populations expanded throughout northern Yellowstone in the middle Holocene as a result of effectively drier conditions than before, and a decline of mesophytic plant taxa during the late Holocene imply continued drying, even though fire frequency decreased in recent millennia.

Hydrothermal explosions are violent and dramatic events resulting in the rapid ejection of boiling water, steam, mud, and rock fragments from source craters that range from a few meters up to more than 2 km in diameter; associated breccia can be emplaced as much as 3 to 4 km from the largest craters. Hydrothermal explosions occur where shallow interconnected reservoirs of steam- and liquid-saturated fluids with temperatures at or near the boiling curve underlie thermal fields. Sudden reduction in confining pressure causes fluids to flash to steam, resulting in significant expansion, rock fragmentation, and debris ejection. In Yellowstone, hydrothermal explosions are a potentially significant hazard for visitors and facilities and can damage or even destroy thermal features. The breccia deposits and associated craters formed from hydrothermal explosions are mapped as mostly Holocene (the Mary Bay deposit is older) units throughout Yellowstone National Park (YNP) and are spatially related to within the 0.64-Ma Yellowstone caldera and along the active Norris-Mammoth tectonic corridor. In Yellowstone, at least 20 large (>100 m in diameter) hydrothermal explosion craters have been identified; the scale of the individual associated events dwarfs similar features in geothermal areas elsewhere in the world. Large hydrothermal explosions in Yellowstone have occurred over the past 16 ka averaging ~1 every 700 yr; similar events are likely in the future. Our studies of large hydrothermal explosion events indicate: (1) none are directly associated with eruptive volcanic or shallow intrusive events; (2) several historical explosions have been triggered by seismic events; (3) lithic clasts and comingled matrix material that form hydrothermal explosion deposits are extensively altered, indicating that explosions occur in areas subjected to intense hydrothermal processes; (4) many lithic clasts contained in explosion breccia deposits preserve evidence of repeated fracturing and vein-filling; and (5) areal dimensions of many large hydrothermal explosion craters in Yellowstone are similar to those of its active geyser basins and thermal areas. For Yellowstone, our knowledge of hydrothermal craters and ejecta is generally limited to after the Yellowstone Plateau emerged from beneath a late Pleistocene icecap that was roughly a kilometer thick. Large hydrothermal explosions may have occurred earlier as indicated by multiple episodes of cementation and brecciation commonly observed in hydrothermal ejecta clasts. Critical components for large, explosive hydrothermal systems include a water-saturated system at or near boiling temperatures and an interconnected system of well-developed joints and fractures along which hydrothermal fluids flow. Active deformation of the Yellowstone caldera, active faulting and moderate local seismicity, high heat flow, rapid changes in climate, and regional stresses are factors that have strong influences on the type of hydrothermal system developed. Ascending hydrothermal fluids flow along fractures that have developed in response to active caldera deformation and along edges of low-permeability rhyolitic lava flows. Alteration of the area affected, self-sealing leading to development of a caprock for the hydrothermal system, and dissolution of silica-rich rocks are additional factors that may constrain the distribution and development of hydrothermal fields. A partial low-permeability layer that acts as a cap to the hydrothermal system may produce some over-pressurization, thought to be small in most systems. Any abrupt drop in pressure initiates steam flashing and is rapidly transmitted through interconnected fractures that result in a series of multiple large-scale explosions contributing to the excavation of a larger explosion crater. Similarities between the size and dimensions of large hydrothermal explosion craters and thermal fields in Yellowstone may indicate that catastrophic events which result in large hydrothermal explosions are an end phase in geyser basin evolution. The Mary Bay hydrothermal explosion crater complex is the largest such complex in Yellowstone, and possibly in the world, with a diameter of 2.8 km in length and 2.4 km in width. It is nested in Mary Bay in the northern basin of Yellowstone Lake, an area of high heat flow and active deformation within the Yellowstone caldera. A sedimentary sequence exposed in wave-cut cliffs between Storm Point and Mary Bay gives insight into the geologic history of the Mary Bay hydrothermal explosion event. The Mary Bay explosion breccia deposits overlie sand above varved lake sediments and are separated locally into an upper and lower unit. The sand unit contains numerous small normal faults and is coextensive with the Mary Bay breccia in its northern extent. This sand may represent deposits of an earthquake-generated wave. Seismicity associated with the earthquake may have triggered the hydrothermal explosion responsible for development of the Mary Bay crater complex. Large hydrothermal explosions are rare events on a human time scale; however, the potential for additional future events of the sort in Yellowstone National Park is not insignificant. Based on the occurrence of large hydrothermal explosion events over the past 16,000 yr, an explosion large enough to create a 100-m-wide crater might be expected every 200 yr.

The track of the Yellowstone hot spot is represented by a systematic northeast-trending linear belt of silicic, caldera-forming volcanism that arrived at Yellowstone 2 Ma, was near American Falls, Idaho about 10 Ma, and started about 16 Ma near the Nevada-Oregon-Idaho border. From 16 to 10 Ma, particularly 16 to 14 Ma, volcanism was widely dispersed around the inferred hot-spot track in a region that now forms a moderately high volcanic plateau. From 10 to 2 Ma, silicic volcanism migrated N54°E toward Yellowstone at about 3 cm/year, leaving in its wake the topographic and structural depression of the eastern Snake River Plain (SRP). This <10-Ma hot-spot track has the same rate and direction as that predicted by motion of the North American plate over a thermal plume fixed in the mantle. The eastern SRP is a linear, mountain-bounded, 90-km-wide trench almost entirely(?) floored by calderas that are thinly covered by basalt flows. The current hot-spot position at Yellowstone is spatially related to active faulting and uplift. Basin-and-range faults in the Yellowstone-SRP region are classified into six types based on both recency of offset and height of the associated bedrock escarpment. The distribution of these fault types permits definition of three adjoining belts of faults and a pattern of waxing, culminating, and waning fault activity. The central belt, Belt II, is the most active and is characterized by faults active since 15 ka on range fronts >700 m high. Belt II has two arms forming a V that joins at Yellowstone: One arm of Belt II trends south to the Wasatch front; the other arm trends west and includes the sites of the 1959 Hebgen Lake and 1983 Borah Peak earthquakes. Fault Belt I is farthest away from the SRP and contains relatively new and reactivated faults that have not produced new bedrock escarpments higher than 200 m during the present episode of faulting. Belt III is the innermost active belt near the SRP. It contains faults that have moved since 15 to 120 ka and that have been active long enough to produce range fronts more than 500 m high. A belt with inactive faults, belt IV, occurs only south of the SRP and contains range-front faults that experienced high rates of activity coincident with hot-spot volcanism in the late Tertiary on the adjacent SRP. Comparison of these belts of fault activity with historic seismic activity reveals similarities but differences in detail. That uplift migrated outward from the hot-spot track is suggested by (1) the Yellowstone crescent of high terrain that is about 0.5 km higher than the surrounding terrain, is about 350 km across at Yellowstone, wraps around Yellowstone like a bow wave, and has arms that extend 400 km southerly and westerly from its apex; (2) readily erodible rocks forming young, high mountains in parts of this crescent; (3) geodetic surveys and paleotopographic reconstructions that indicate young uplift near the axis of the Yellowstone crescent; (4) the fact that on the outer slope of this crescent glaciers during the last glaciation were anomalously long compared with those of the preceding glaciation, suggesting uplift during the intervening interglaciation; (5) lateral migration of streams, apparent tilting of stream terraces away from Yellow-stone, and for increasingly younger terrace pairs, migration away from Yellowstone of their divergent-convergent inflection point; and (6) a geoid dome that centers on Yellowstone and has a diameter and height similar to those of oceanic hot spots. We conclude that the neotectonic fault belts and the Yellowstone crescent of high terrain reflect heating that is associated with the hot-spot track but has been transferred outward for distances of as much as 200 km from the eastern SRP in 10 m.y. The only practical mechanism for such heat transport would be flow of hot material within the asthenosphere, most likely by a thermal mantle plume rising to the base of the lithosphere and flowing outward horizontally for at least such 200-km distances. The changes in the volcanic track between 16 to 10 Ma and 10 to 2 Ma is readily explained by first the head (300-km diameter) and then the chimney (10 to 20 km across) phases of a thermal mantle plume rising to the base of the southwest-moving North American plate. About 16 Ma, the bulbous plume head intercepted the base of the lithosphere and mushroomed out, resulting in widespread magmatism and tectonism centered near the common borders of Nevada, Oregon, and Idaho. Starting about 10 Ma near American Falls and progressing to Yellowstone, the chimney penetrated through its stagnating but still warm head and spread outward at the base of the lithosphere, adding basaltic magma and heat to the overriding southwest-moving lithospheric plate, leaving in its wake the eastern SRP-Yellowstone track of calderas, and forming the outward-moving belts of active faulting and uplift ahead and outward from this track. We favor a mantle-plume explanation for the hot-spot track and associated tectonism and note the following problems with competing hypotheses: (1) for a rift origin, faulting and extension directions are at nearly right angles to that appropriate for a rift; (2) for a transform origin, geologic evidence requires neither a crustal flaw nor differential extension across the eastern SRP, and volcanic alignments on the SRP do not indicate a right-lateral shear across the SRP; and (3) for a meteorite impact origin, evidence expected to accompany such an impact near the Oregon-Nevada border has not been found. The southern Oregon rhyolite zone is not analogous to the eastern SRP and therefore does not disprove formation of the Yellowstone hot-spot track by a mantle plume. The postulated rise of a mantle-plume head into the mantle lithosphere about 16 Ma corresponds in both time and space with the following geologic changes: (1) the start of the present pattern of basin-range extension, (2) intrusion of basalt and rhyolite along the 1,100-km-long Nevada-Oregon rift zone, (3) the main phases of flood basalt volcanism of the Columbia River and Oregon plateaus, and (4) a change from calc-alkaline volcanism of intermediate to silicic composition to basaltic and bimodal rhyolite/basalt volcanism.

Weathering-rind thicknesses were measured on volcanic clasts in sequences of glacial deposits in seven mountain ranges in the western United States and in the Puget lowland. Because the rate of rind development decreases with time, ratios of rind thicknesses provide limits on corresponding age ratios. In all areas studied, deposits of late Wisconsinan age are obvious; deposits of late Illinoian age (ca. 140 ka) also seem to be present in each area, although independent evidence for their numerical age is circumstantial. The weathering-rind data indicate that deposits that have intermediate ages between these two are common, and ratios of rind thicknesses suggest an early Wisconsinan age (about 60 to 70 ka) for some of the intermediate deposits. Three of the seven studied alpine areas (McCall, Idaho; Yakima Valley, Washington; and Lassen Peak, California) appear to have early Wisconsinan drift beyond the extent of late Wisconsinan ice. In addition, Mount Rainier and the Puget lowland, Washington, have outwash terraces but no moraines of early Wisconsinan age. The sequences near West Yellowstone, Montana; Truckee, California; and in the southern Olympic Mountains have no recognized moraines or outwash of this age. Many of the areas have deposits that may be of middle Wisconsinan age. Differences in the relative extents of early Wisconsinan alpine glaciers are not expected from the marine oxygen-isotope record and are not explained by any simple trend in climatic variables or proximity to oceanic moisture sources. However, alpine glaciers could have responded more quickly and more variably than continental ice sheets to intense, short-lived climatic events, and they may have been influenced by local climatic or hypsometric effects. The relative sizes of early and late Wisconsinan alpine glaciers could also reflect differences between early and late Wisconsinan continental ice sheets and their regional climatic effects.

Abstract A wide variety of dating methods are used in Quaternary research, and each method has many applications and limitations. Because of this variety, we cannot discuss the applications and limitations of all methods here. The more versatile and widely used methods, including 14 C, K/Ar, fission-track, U-series, paleomagnetism, thermoluminescence, and amino acid dating are treated more comprehensively in this chapter than other methods that are shown on the summary chart. The summary chart is provided here to give an overview of dating work and research for the Quaternary. This summary consists mainly of a table (Plate 2) that is modified and updated from Colman and Pierce (1977, Plate 1, ref. 66). The table is intended as an overview and concise guide to Quaternary dating methods. It contains many subjective judgments and should not be considered definitive; the entries for applicability, age range, and optimum resolution are particularly interpretive. Details concerning assumptions, analytical techniques, uncertainties, and interpretations should be obtained from specialized references using the key references in Plate 2 as a guide. The dating methods described range from well-known and established techniques to experimental procedures whose results are subject to considerable interpretation. Key references included on Plate 2 are intended as an entry into the vast literature on dating methods; space prohibits a more complete listing. We have emphasized recent review papers and notable examples of applications as sources of additional references and information. Dating methods discussed in other sections of this chapter are indicated by asterisks in.