A Discrete Fracture Network (DFN) model was used to simulate the results of a production test carried out in a well drilled in a tight, fractured carbonate reservoir. Several static DFN models, depicting different geological scenarios, were built based on data from well logs, core analyses, PLT surveys and structural geology studies. Each of these models underwent a validation procedure, consisting of the simulation of the production test. The comparison between the simulated results and the actual data identified the scenario whose results most closely matched the actual well behaviour.

In order to compensate for the lack of geological data, an iterative loop was performed between the static model and the dynamic simulation. Constraints-added flow simulations provided new information for use in modifying the DFN model, resulting in a step-by-step updating of the static model itself. Finally, a geologically sound model accurately matching the results of the production test was obtained. The final DFN model was used to calculate the equivalent petrophysical parameters that were transferred to the corresponding region of the full field dual-porosity fluid flow model.

You do not currently have access to this article.