The ash flow is the basic unit of most pyroclastic deposits known as welded tuffs, tuff flows, pumice flows, or ignimbrites. Other useful units are the cooling unit, both simple and compound, the composite sheet, and the ash-flow field. The deposit of one ash flow is considered analogous to, but not necessarily the same as, the deposit produced by the passage of one nuée ardente. The geological evidence favors gas-emitting particulate flows as the agents of transport.

The ash-flow is an efficient heat-conserving mechanism, and, because many ash-flow fields contain cooling units believed to be derived from common magma, but clearly emplaced at different temperatures, a cooling mechanism must be invoked. Such a mechanism may be the vertical eruption column which influences the final properties of many ash flows.

Deposits are grouped in seven orders of magnitude ranging from 0.001 to 10,000 km3. Orders 1 to 3 include deposits erupted from domes. Those from craters rarely exceed 10 km3, order 4. Deposits of orders 5 to 7 are associated with subsidence structures in all examples where the source area is known. Welded tuffs occur in fields of all volumes, but they are common among the fissure-erupted deposits of larger volume. Some ash-flow fields distributed from a common source area reach areal dimensions of more than 12,000 square miles and volumes of about 500 cubic miles; some multiple-source fields are known to have volumes of more than 2000 cubic miles. Deposits of single-eruption cycles having volumes of more than a few cubic miles are thought to be related to subsidence structures.

Sorting data suggest that most welded tuffs contain more than 70 per cent by weight of materials less than 4 mm in diameter. Welding and crystallization depend largely on relative temperature and thickness of the cooling units, and most of the textures in welded ash flows can be explained in terms of these variables. Welding begins with incipient cohesion of glass shards and fragments and continues with decreasing pore space and deformation to complete welding which results in a dense black glass.

Crystallization is superimposed on the welded material at any stage, but the degree of welding may influence the type of crystallization. The degrees of welding and of crystallization are zonal and permit the distinction between simple and compound cooling. Incipient welding may take place below 535° C., but complete welding depends on load pressure and time and is thus influenced by the cooling history of individual cooling units. Deposits emplaced at low temperatures such as the Crater Lake, Oregon, “pumice flows” are essentially nonwelded in thick deposits. The high-temperature welded tuffs of southeastern Idaho are densely welded in very thin sheets. Most welded tuffs are probably emplaced at temperatures intermediate between these limits. Some deposits record a systematic change in temperature during the eruption cycle; others record a change in magmatic composition. Some ash flows are thought to be genetically related to near-surface plutons, some of which are large and complex.

This content is PDF only. Please click on the PDF icon to access.

First Page Preview

First page PDF preview
You do not currently have access to this article.