A long-standing issue in Cordilleran geology involves the nature of Basin and Range (western USA) volcanism, and whether such magmatism provides a trigger for extensional deformation, or if volcanic activity is a passive response to extension. We use space-time-composition patterns across the central and southern Basin and Range, and where appropriate, reconstructed latitudes and longitudes of volcanic rocks, to show that volcanism is fundamentally a passive process. Our analysis suggests that Basin and Range volcanism is initiated by the transition from a subduction to a transform boundary (now manifest as the San Andreas fault), which causes a slab window to open, as the subducting Farallon plate falls away. Accordingly, volcanic activity follows the northward-migrating Mendocino Triple Junction (MTJ). In the wake of the MTJ, continental mantle lithosphere is heated over a time scale of 10–12 Ma; it then rapidly degrades (or is removed) 17–20 Ma after MTJ arrival at any given latitude, and is replaced by asthenosphere. In the central Basin and Range, MTJ migration triggers the well-documented structural migration of the Sierra Nevada away from the Colorado Plateau. Not only is volcanism triggered by the tectonic transition, but in the central Basin and Range volcanism also migrates west, following the initiation of upper crustal extensional faulting; the lag between the onset of extension and initiation of volcanism is a remarkably consistent 2 Ma. Within this framework, the initial stage of eastward-concentrated volcanism is dominated by felsic magmatism, which then gradually degrades to a more mafic composition. This pattern, and temporal relations indicate that once lithospheric extension begins, between 2 and 5 Ma are needed to develop conduits through which nonviscous magmas can transit the crust, and that especially high amounts of extensional strain favor the eruption of K2O-rich, low-degree partial melts. Our observations indicate that it is unlikely that mantle plume processes initiated Basin and Range volcanism within the study area, and that decreases in SiO2 and increases in incompatible element abundances to the east within the Cordillera are best explained by continental mantle lithosphere that thickens to the east, which reduces average melt fractions.
The interplay between magmatism and tectonics in the western United States (Fig. 1) is a topic of long-standing debate; proposed models for Basin and Range magmatism include thermal mantle plumes (Best and Brimhall, 1974; Parsons et al., 1994; Wang et al., 2002), continental extension (e.g., Gans et al., 1989; Christiansen et al., 1992; Wernicke et al., 1996), migration of the Mendocino Triple Junction (Dickinson and Snyder, 1979; Glazner and Supplee, 1982), lithosphere removal (e.g., Feldstein and Lange, 1999; Humphreys, 1995, 2009), or some combination thereof (Ormerod et al., 1988). Some have even suggested that the Basin and Range is a region in which plate tectonic theory fails to adequately explain volcanic activity (e.g., Cañon-Tapia and Walker, 2004). Whether mantle processes play an active role in promoting volcanism (e.g., a mantle plume; Wang et al., 2002) or magmatism is a passive response to tectonism and crustal extension (McQuarrie and Oskin, 2010) is a fundamental issue of Cordilleran evolution. To test whether plate tectonic actions control volcanism, we add a geochemical perspective to structural and palinspastic reconstructions of Snow and Wernicke (2000), McQuarrie and Wernicke (2005), and McQuarrie and Oskin (2010), and test the models in Putirka et al. (2012) using a broader context. We do this by comparing temporal distributions and chemical compositions of volcanic rocks to time-space patterns of extensional deformation (Snow and Wernicke, 2000; McQuarrie and Wernicke, 2005) and an evolving plate boundary (Atwater and Stock, 1998).
Our observations indicate that the onset of Basin and Range volcanism is controlled by the arrival of the Mendocino Triple Junction (MTJ; Fig. 2) at any given latitude and that volcanic rock compositions change dramatically in the 5–20 Ma after MTJ arrival. We also show that volcanism initiation and volcanic rock compositions are sensitive to the onset of extensional strain. These results indicate that Basin and Range volcanism is a passive response to external tectonic forces.
Because air-fall and ash-flow tuffs can be far traveled, we have attempted to filter out tuffs that do not form a spatial cluster, for example, peripheral to a volcano or caldera system. We also applied a geochemical filter to identify volcanic rocks affected by K-metasomatism; such altered rocks generally have K2O/Na2O > 5 (Brooks and Snee, 1996); we exclude all rocks with K2O/Na2O > 3 (using an even more stringent filter of 2.5 or 2 does not affect our results).
To identify whether volcanic rocks have a mantle lithosphere or asthenosphere source, we rely on prior geochemical studies of Basin and Range basalts. DePaolo and Daley (2000), building upon work by Fitton et al. (1988, 1991) and Kempton et al. (1991), showed that asthenosphere and subcontinental mantle lithosphere sources can be differentiated using 143Nd/144Nd and 87Sr/86Sr ratios and the ratios of large ion lithophile elements (LILEs) to high field strength elements (HFSEs) (i.e., La/Nb, Ba/Nb, or Sr/P). LILEs are enriched in subduction-related fluids, whereas HFSEs are depleted, leading to high LILE/HFSE ratios (e.g., high La/Nb, Ba/Nb) at arcs; ancient, subcontinental mantle lithosphere contains similar enrichments, and reveals its time-integrated enrichments in the form of low 143Nd/144Nd and high 87Sr/86Sr. For example, asthenospheric partial melts have low La/Nb (<1.7) and high 143Nd/144Nd (>0.513), whereas Cordilleran mantle lithospheric partial melts range to high La/Nb (>7) and low 143Nd/144Nd (<0.512) (Perry et al., 1987; Fitton et al., 1988, 1991; DePaolo and Daley, 2000) due to Mesozoic-aged subduction-related enrichments (Humphreys et al., 2003; Lee, 2005; Dickinson, 2006). Provided that volcanic rocks avoid crustal contamination, La/Nb, Ba/Nb and 143Nd/144Nd ratios indicate the nature of the source region because these ratios are unaffected by fractional crystallization or degree of partial melting. Estimated asthenosphere and various continental mantle lithosphere source compositions are adapted from Putirka et al. (2012), and the composition of sub-Cordilleran asthenosphere is approximated using mid-oceanic ridge basalts from the East Pacific Rise (Perfit et al., 1996; Hays, 2004; Sims et al., 1999).
RESULTS AND DISCUSSION
Reconstructed Volcanic Rock Locations
The SW00 model yields considerable displacements with respect to longitude but remarkably small latitudinal displacements. For example, latitudinal displacements are as great as 110 km for a few Miocene samples in the Walker Lane, but 90% of latitudinal displacements (n = 1956) are <25 km, and the mean latitudinal offset is just 13.7 km. These small displacements are a function of principally east-west extension outside the Walker Lane, while within the Walker Lane most volcanic rocks (e.g., Coso, Big Pine, Long Valley) are too young to have been displaced more than a few kilometers. In contrast, longitudinal displacements are considerable, averaging 79.4 km across the reconstructed area and ranging to 280 km for Miocene rocks of the Sierra Nevada. Our maximum displacement (280 km) and mean extension rates (23 mm/yr maximum; 10.6 ± 4.3 mm/yr average) both are within ranges determined by Wernicke et al. (1988), and our processing reproduces fixed points (cities) in SW00 to within ±5 km. Consequently, we restrict our analyses of longitudinal variation to the central Basin and Range, where we have reconstructed paleopositions, but we consider a broader array of Basin and Range data when only evaluating latitudinal positions.
Migrating Mendocino Triple Junction and Onset of Volcanism
Histograms of age dates (Fig. 2) show that MTJ arrival is well correlated with the timing of volcanic activity within 600 km of the plate boundary (i.e., within California [CA], Nevada [NV], and Arizona [AZ]), and is more poorly correlated with volcanism farther to the east (Utah [UT], Colorado [CO], New Mexico [NM]). In the CA-NV-AZ region, volcanic activity is nearly absent prior to MTJ arrival, then increases significantly, reaching a peak at 6 Ma post-MTJ arrival. While no waning trend is well defined, volcanic activity appears to have died out by 25–30 Ma after passage of the MTJ. It is significant that peaks at 18–22 Ma post-MTJ arrival are related to the Coso (CA) and Springerville (AZ) volcanic fields and most likely reflect sampling bias. NAVDAT associates an age date for every geochemical analysis, and the Coso (n > 300) and Springerville (n > 450) fields are oversampled relative to other fields. Reducing the number of samples from those fields to the average number of samples for the other volcanic fields yields a waning trend of volcanic activity between 6 and 26 Ma post-MTJ arrival. Regardless, the age date distribution provides decisive support for a developing slab window or slab gap model (Dickinson and Snyder, 1979) in the CA-NV-AZ region. To the extent that age dates in NAVDAT reflect activity, volcanism within the CO-UT-NM region is roughly half that of CA-NV-AZ, with no comparable correlation of age dates relative to MTJ arrival (Fig. 2), indicating that the slab window is well developed beneath CA-NV-AZ and not beneath CO-UT-NM because the latter region is too far east to be affected by slab window processes.
Our observations do not delimit the eastern extent of slab window–related volcanism. The Springerville volcanic field is east of the slab windows identified by Atwater and Stock (1998) and Dickinson (1997), but appears to be within the MTJ-affected region. However, development of the MTJ may have triggered lithosphere thinning east of the slab window. Activity at the Springerville volcanic field perhaps indicates that the approach of the Mendocino Fracture Zone was accompanied by instability in the subducting Farallon slab (Coney and Reynolds, 1977). Although Atwater and Stock (1998) suggested that freezing asthenosphere against the base of continental lithosphere may yield a very limited time span for any particular region of a slab window, our observations (Fig. 2) suggest that that the life span may be ∼25 Ma. MTJ arrival does not explain volcanic activity farther east, where volcanism began (after a >25 Ma hiatus) at 40 Ma at 32°N. This timing appears to be well in advance of the arrival of the MTJ (Fig. 2).
Compositional Evidence for an Evolving Slab Window
Volcanic rock composition variations are remarkably well correlated with MTJ arrival time and illustrate the spatial extent and time scale over which the Cordilleran slab window developed (Fig. 4). Ratios of La/Nb and Ba/Nb, for example, decrease dramatically ∼17 Ma after the MTJ arrival (Figs. 4A, 4B), indicating a rather abrupt shift from a fluid-enriched source to a source that approaches asthenosphere-like depletions in LILEs. This temporal contrast occurs for all volcanic rocks in CA, NV, and AZ, regardless of rock composition. These changes parallel decreases in 87Sr/86Sr and increases in 143Nd/144Nd, which also approach asthenosphere-like values. It is interesting that these isotopic shifts occur much sooner after (5 Ma) MTJ arrival than the LILE/HFSE ratio shifts. In NV and AZ, the decrease is evident for all volcanic rock compositions, but in CA the isotopic shift is only clearly developed among mafic basalts (MgO > 6%; Figs. 4C, 4D). The additional complexity in CA suggests that more evolved rocks there have assimilated more high 87Sr/86Sr and low 143Nd/144Nd crustal materials, such as found in the Sierra Nevada Batholith (Putirka et al., 2012). However, the contrast might also result from complexities in mantle sources to the west (CA) compared to the east (AZ and NV; Fig. 5). In CA, Basin and Range volcanic rocks are derived from at least one source with low La/Nb and low 143Nd/144Nd, and perhaps at least two other sources, one of which is similar to that beneath NV and AZ, and the other having low 143Nd/144Nd and high La/Nb.
Volcanism as Controlled by Crustal Extension
McQuarrie and Oskin (2010) suggested that volcanism follows the onset of crustal extension in any given area. To test this idea and to better quantify the relationship, we applied estimates for the timing of the onset and end of crustal extension from McQuarrie and Wernicke (2005, their Fig. 4) to the onset of volcanism using our reconstructed volcanic locations (Fig. 6A). The data plot into two groups; a black vertical line demarcates the disappearance of a subduction-related signal within erupted volcanic rock compositions (Fig. 6A). Across the central Basin and Range, volcanism migrated westward with time, mostly following the onset of crustal extension. To the east, however, volcanism tends to predate extension by 3–5 Ma, while to the west extension predates volcanism by a very consistent average of 2.0 ± 0.8 Ma, exclusive of the Grapevine Mountains vector (see McQuarrie and Wernicke, 2005, table 2 therein). Extension in the Grapevine Mountains putatively predates volcanism by ∼7.2 Ma, but that vector is based on a Cordilleran fold-thrust belt correlation that was convincingly disputed by Miller and Prave (2002) and Miller and Pavlis (2005). Consequently, if the magnitude of the displacement is much less, the initiation of extension might be much later than that portrayed.
These time-space patterns correlate well with compositional contrasts. In the east, where volcanism predates extension, volcanism is much more evolved, with a mean composition of dacite, whereas to the west, basaltic andesite is the mean erupted composition (Fig. 6A). This trend in SiO2 matches a steady westward decrease in 87Sr/86Sr isotopic ratios that is especially evident among andesitic samples (Fig. 6B); only basalts from the unusual Deep Springs locality in eastern CA (Beard and Glazner, 1995) deviate from the trend. These compositional trends indicate (1) that basaltic precursors in the eastern part of the Basin and Range were more likely to have undergone crustal assimilation and (2) that in the early stages of crustal extension (to the east, near the Colorado Plateau), basalt was less likely to be erupted than more differentiated, less dense counterparts. We posit that in the initial phases of slab window development, extension rates may have been low, and so perhaps impeded the rapid transit of basaltic magmas through thick crust. The inferred time lag between volcanism and the onset of extension in the east (3–5 Ma) is smaller than the time lag of 5–10 Ma inferred by Liu and Furlong (1994) for thermal softening of the lithosphere. The difference between the two measures may well reflect an episode of unerupted basalt underplating of the crust. Alternatively, Parsons et al. (1992) suggested that when extension rates are sufficiently low, vertical dike intrusions increase the horizontal principal stress and thereby decrease ambient deviatoric stresses, leading to the intrusion of sills rather than dikes, especially at the base of weak crust. These models are not mutually exclusive. For example, it is possible that (1) during the initial phases of extension (15–20 Ma), basaltic sills partially melted preexisting crust at the western margin of the Colorado Plateau, leading to the eruption of silicic magmas, and subsequently (2), thermally softened crust facilitated extension (which migrated west, as did the locus of volcanic activity), and magmas became more mafic once the stress regime favored eruption of mantle-derived basaltic magmas through vertical conduits.
A final space-time pattern tests the model of Putirka and Busby (2007), wherein the crack interaction model of Takada (1994) was applied to explain the synchronicity of high K2O eruptions and transtensional normal faulting near the Sierra Nevada Range front at 38°N. To test whether this relationship is generally applicable, we compare Basin and Range rocks with high K-indices in a temporal context in Figure 7, the middle panel of which (Fig. 7B) illustrates the northward migration of volcanism on which Equation 1 is based. The vast majority of Basin and Range volcanics have a positive K-index (higher than the Cascades), but still mostly <1.9. The locations of all rocks with K-index > 1.9 are not randomly distributed, but are concentrated in three areas: the Yucca Mountain–Southern Nevada volcanic field (Noble et al., 1984; Broxton et al., 1993; Valentine and Perry, 2007), the Colorado River Extensional Corridor (CREC; Howard and John, 1987), and in a narrow band that trends from northeastern NV south to Kane Springs Wash, where it meets the CREC.
In two of these three areas, high K-index volcanism is spatially coincident with areas of high total strain and temporally coincident with high rates of extension. At Yucca Mountain, nearly all rocks with a high K-index (>1.9) were erupted between 11 and 13 Ma, during peak extensional strain between 12.7 and 11.6 Ma (Fig. 7A; Fridrich et al., 1998, 1999). In the CREC, high K-index volcanic rocks define a northward-younging trend (Fig. 7B) that correlates with northward migration of high extensional strain. The earliest phase of CREC volcanism, in the Chocolate Mountains (33°N; 37–21.5 Ma), corresponds to the onset of rapid exhumation and extension in this region (Jacobsen et al., 2002). High K-index rocks erupted between 23 and 18 Ma are coeval and cospatial with accelerated exhumation of the Whipple Mountain metamorphic core complex (Anderson et al., 1988), and the onset of detachment faulting and basin development (at ∼34.5°N, near the Colorado River; Beratan and Nielsen, 1996) (Fig. 7B). Younger clusters of high-K index volcanics in the CREC, erupted between 18 and 12 Ma, coincide with extensional faulting that Faulds et al. (2002) ascribed to a period of major extension between 16.5 and 11 Ma (between 35 and 36°N).
In the Lake Mead region, Duebendorfer and Simpson (1994) (Fig. 7B) documented post–8.5 Ma normal fault activity near Lake Mead that might correlate with the youngest high-K volcanism at the northern end of the CREC. The distribution of high-K-index volcanic rocks near the NV-Idaho border also migrates southward toward the CREC, from Windous Butte (38.6°N, at 31 Ma; Brooks and Snee, 1996), to Indian Peak (38.27°N, at 27 Ma; Best et al., 1989) then south to the southwestern NV volcanic field immediately north of the Yucca Mountain area (37.8°N, at 27–18 Ma; Warren et al., 2000), and culminating at Kane Springs Wash (37.25°N, at 14 Ma; Novak and Mahood, 1986) (Fig. 7C). Strain rates along most of this trend are unknown, but at the southern terminus of the region (at Kane Springs Wash), Scott et al. (1995) found that the time of peak extension rate, at 15–13.5 Ma, coincided with the eruption of peralkaline (i.e, high K-index) rocks at 14.4 Ma. These space-time coincidences indicate that K-index may be a powerful tool for gauging the timing of extensional faulting where stratigraphic or structural information is insufficient.
Active or Passive Mantle Upwelling?
Whether the initial phases of volcanism at the western margin of the Colorado Plateau, which precede extension, are first driven by active mantle thermal upwelling, or are truly a passive response to slab window opening is not clearly resolved by our space-time-composition comparisons. In Putirka et al. (2007), estimates of mantle potential temperatures were used to discriminate between basaltic magmas generated by mantle plumes (caused by active upwelling of thermal plumes) or passive upwelling of asthenosphere due to lithosphere thinning. Rocks with sufficiently high MgO are rare in the Basin and Range, so the methods employed in Putirka et al. (2007) are not easily applicable. However, partial melting depths serve as a proxy for melting temperatures, as applied by Wang et al. (2002) to infer the presence of a mantle plume beneath the Basin and Range. Wang et al. (2002) concluded that partial melting depths increase from eastern CA to the interior of NV, and hypothesized that mantle temperatures should increase correspondingly, signaling a mantle plume situated beneath central NV. In order to evaluate this hypothesis, we extended their profile to the east (as far as the Raton-Clayton volcanic field in NM) and compared SiO2 contents for volcanic rocks with 8%–10% MgO for all volcanic rocks (within CA, NV, AZ, UT, CO, and NM) erupted between long 122°W and 103°W (Fig. 8A). This analysis indicates that SiO2 contents decrease across the entire Cordillera, from a mean of 49.3% SiO2 west of 121°W to a mean of 46% SiO2 east of 104°W. These observations are corroborated by qualitative changes in Sm/Yb ratios, which increase with greater depths of melting due to the increased influence of garnet in the mantle source region (Fig. 8C). If high melting pressures were driven by high melting temperatures due to a mantle plume, the plume would then be centered east of the Raton-Clayton volcanic field, i.e., somewhere in Kansas. This seems implausible, which motivates us to search for an alternative control on melting pressures.
Decreasing SiO2 contents along the west-to-east transect are consonant with a model analogous to that proposed by Haase (1996) for oceanic islands. In Figure 9A, we show how a thermal lithosphere with variable thickness may control magma compositions in the U.S. Cordillera. Our qualitative cross section (Fig. 9A) is based on geophysical results (Goes and van der Lee, 2002) that show a thermal lithosphere that thickens from west to east. A key aspect of this model is that the thermal lithosphere controls the top of the melting column. If the mantle is of constant composition and water content, then initial melting depths (the bottom of the melting columns, MC1, MC2, and MC3 in Fig. 9A) will be controlled by the depth of a given isotherm, e.g., the 1300 °C isotherm; that isotherm should reach shallower depths where the lithosphere is thinner (as beneath accreted crust at a continental margin, Fig. 9A), or beneath a slab window, but fall to greater depths where the lithosphere is thick (as beneath colder cratonic crust and mantle). Of course, the mantle is not of constant composition, but as shown in Putirka et al. (2012), subduction-related enrichments in the Basin and Range and Cascades do not vary spatially to any great degree. In any case, the key control in Figure 9A is the fact that a thicker thermal lithosphere means that colder isotherms are depressed downward, and so the top of a melting column beneath cratonic mantle will occur at greater depths (MC3), while beneath thin lithosphere, melting columns will reach much shallower depths (MC1). In this model, melting columns are thus shorter and deeper beneath thick lithosphere (e.g., MC3, compared to MC1). This does not mean that melting cannot occur elsewhere in the lithosphere; the Cordilleran mantle lithosphere is almost certainly spatially and compositionally complex. For example, from the Cascades, there is an eastward step increase in Sm/Yb ratios, which likely indicates an eastward transition into a mantle lithosphere source, perhaps one that contains pyroxenite (see Putirka et al., 2012, for a discussion of the transition). Variations in the thermal lithosphere can both induce the spatial patterns shown in Figure 8 and at the same time avoid the problem of placing a plume beneath the plains of the midwestern U.S. In Figure 9A, we show the case of subduction (or nascent slab window), where isotherms are perturbed by a subducted slab; however, the key effect on the melting columns is hypothesized to be produced by a thermal lithosphere that varies in thickness, so the qualitative results are the same if the slab were to break, detach, and lead to a slab window.
The effect on melt compositions of the model of Figure 9A is qualitatively illustrated in Figures 9B, 9C. Beneath thicker lithosphere (MC3), melt fractions are less because the area bounded by the geotherm and the mantle solidus (whether wet or dry) is reduced (Figs. 9B, 9C). The resulting partial melts will be enriched in incompatible elements (e.g., high K; Fig. 2, or high Nb, and Sm/Yb; Figs. 8B, 8C), and will have a higher pressure signal (lower SiO2 and higher Sm/Yb), because the mean depth of melting will be greater and the mean F will be lower. Conversely, to the west where the lithosphere is thin (e.g., MC1, beneath the Cascades), the area bounded by the geotherm and the mantle solidus will be greater, resulting in lower mean pressures of partial melting and higher degrees of partial melting, and so will have higher SiO2, lower Sm/Yb, and lower concentrations of incompatible elements (e.g., K, Nb).
To quantify this model, we used the Si-activity barometer and liquid thermometers in Putirka (2008); it was demonstrated (in Putirka et al., 2012) that these can be applied to pyroxenite sources (which may permeate the Cordilleran lithospheric mantle; Humphreys et al., 2003; Lee, 2005), provided olivine is present. These calculations use mean FeO contents at a given longitude and assume that mantle partial melts are in equilibrium with Fo89 olivine to obtain temperature, T. Accordingly, the west to east decrease in SiO2 abundances (Fig. 8A) predict partial melting depths that range from 43 km at 122°W to 90 km at 103°W. These results provide powerful support for the idea that lithosphere thickness, rather than a thermal plume, controls the compositions of mafic volcanic rocks, since if the plume model were correct, SiO2 variations across the Cordillera (Fig. 8) would then require that it be centered west of the Rocky Mountains, where volcanism is absent, and surface elevations decrease.
Geochemical (Kistler and Peterman, 1973; DePaolo and Farmer, 1984; Ormerod et al., 1988) and geophysical observations (Mavko and Thompson, 1983; Humphreys and Dueker, 1994; Goes and van der Lee, 2002; Li et al., 2007), as well as thermal modeling (Harry and Leeman, 1995; Leeman et al., 2005), support the concept that the lithosphere thickens from west to east. Seismic data in particular show that the lithosphere is 50–60 km beneath the Basin and Range (Goes and van der Lee, 2002), thickening to 80 km (Li et al., 2007) or 100 km (Zandt et al., 1995) beneath the Colorado Plateau, and is 200–250 km beneath the Great Plains (Goes and van der Lee, 2002). Our Si-activity calculations are consistent with the Leeman et al. (2005) and Harry and Leeman (1995) models, which show that Cascadian melt generation occurs at 70–30 km, but that beneath the Basin and Range, partial melting within the subcontinental mantle occurs mostly at >60 km. Our model (Fig. 9) is also consistent with higher K2O contents (Fig. 3) and higher Sm/Yb ratios (Fig. 9B) among Basin and Range magmas compared to the Cascades.
Several space-time-composition patterns indicate that Basin and Range volcanism is a passive response to tectonic processes. First, arrival of the MTJ provides a clear temporal trigger for the onset of volcanism south of 36.75°N (Fig. 2). Between 5 and 20 Ma after MTJ arrival, isotopic and trace element patterns also shift from continental mantle lithosphere toward asthenosphere compositions, signaling the time scale of lithosphere degradation and removal (Fig. 4) (see also Putirka et al., 2012). The role of passive tectonics relative to mantleprocesses is further supported by spatial trends of variable SiO2 contents in basaltic rocks; decreasing SiO2 contents across the entire Cordillera indicate that partial melting depths are controlled by lithosphere thickness rather than a mantle plume. Additionally, the effects of slab window processes are discernible as far east as eastern NV and AZ. Reconstructed volcanic rock locations in the central Basin and Range also largely confirm the view of McQuarrie and Oskin (2010) that volcanism follows the onset of extensional deformation (we calculate the lag to be ∼2 Ma; Fig. 6A). High-K2O volcanism is especially sensitive to extension and is characteristic of significantly extended regions at times dominated by high extension rate (Fig. 7).
However, neither near-surface extension nor volcanism ubiquitously leads the geologic evolution of any particular place within the Basin and Range. Adjacent to the Colorado Plateau, where central Basin and Range extension was initiated, volcanic rocks are silicic, contaminated by crustal assimilation (high 87Sr/86Sr), and their eruption preceded extension by 3–5 Ma. Consequently, during the early phases of continental extension, stress states might have favored sill formation, rather than dike injection (Parsons et al., 1992), and thermal softening (Liu and Furlong, 1994) may have been required to initiate subsequent, more rapid crustal extension and basaltic volcanism. Later, and to the west, however, extension precedes volcanism by 2 Ma and becomes much more mafic in composition. This 2 Ma lag may have allowed development of a favorable stress regime within the crust that fostered magma transport from a deep mantle source to the surface (Takada, 1994; Putirka and Busby, 2007); this process is perhaps best indicated by eruption of low-degree partial melts (alkalic or high K2O magmas) in regions of high extension during episodes dominated by high extension rate.
This research was supported by National Science Foundation grants EAR-0711276, EAR-0711150 (to Putirka and C.J. Busby), EAR-0421272, and EAR-0313688 (to Putirka). We thank Cin-Ty Lee and Douglas Walker for comments on earlier versions of this manuscript. We also thank Brian Cousens and Ed DuBray for reviews that greatly improved the manuscript. We also thank Guest Associate Editor Cathy Busby and Science Editor Carol Frost for their timely and thoughtful handling of our paper.