Abstract The Carrack Field, located in the Southern North Sea Blocks 49/14b and 49/15a, has of the order or 15 bcm (530 bcf) gas initially in place and is operated by Shell UK Ltd. The field consists of a pop-up structure in the south of the field and extends to the north with a gently-dipping monoclinal structure. The reservoir comprises sandstones of the Permian Silverpit and Leman Sandstone formations, which contain c. 85% of the in-place resources. The quality of the reservoir decreases rapidly to the north. Gas is also produced from Carboniferous sandstones of late Duckmantian (Westphalian B)–Bolsovian (Westphalian C) age. Initially, the field was in pressure communication both laterally and vertically with a single gas–water contact. During production time, however, the three main fault blocks behaved independently, and decimetre-thick shale intervals acted as vertical baffles between the sandstone units. The Carrack Field has been in production since 2003 and is developed by a single platform with seven mainly deviated wells. The current production rate is c. 0.7 MMm 3 /day (25 MMscfgd). Until the end of field life in the 2030s, the field is expected to produce gas of the order of a few bcm. The main remaining opportunity is the undeveloped Carrack West compartment.

Abstract Old chalk and flint mine workings occur widely across southern and eastern England. Over 3500 mines are recorded in the national Stantec Mining Cavities Database and more are being discovered each year. The oldest flint mines date from the Neolithic period and oldest chalk mines from at least medieval times, possibly Roman times. The most intensive period for mining was during the 1800s, although some mining activities continued into the 1900s. The size, shape and extent of the mines vary considerably with some types only being found in particular areas. They range from crudely excavated bellpits to more extensive pillar-and-stall styles of mining. The mines were created for a series of industrial, building and agricultural purposes. Mining locations were not formally recorded so most are discovered following the collapse of the ground over poorly backfilled shafts and adits. The subsidence activity, often triggered by heavy rainfall or leaking water services, poses a hazard to the built environment and people. Purpose-designed ground investigations are needed to map out the mine workings and carry out follow-on ground stabilization after subsidence events. Where mine workings can be safely entered they can sometimes be stabilized by reinforcement rather than infilling.