Shallow landslides are significant natural hazards in Oregon, and identification of areas susceptible to future landslides is a critical step in reducing risk. Recent advances in identification of areas susceptible to shallow landslides are mostly based on geographic information system (GIS) calculations of the slope stability using the infinite slope equation. This technique was further improved with high-resolution light detection and ranging (LiDAR)–based digital elevation models (DEM) converted to very accurate slope data as input into the GIS models. However, these models still underestimate and overestimate the susceptibility in certain areas compared to past landslide events and field observations. One significant overestimation we noted occurs in regionally flat areas with isolated steep slopes that have very little relief. We developed a method to remove these isolated overestimated areas using a neighborhood analysis with a maximum relief of 1.22 m (4 ft). Because landslides that originate on the steep slope may extend back into the flat area above the slope, or out onto the flat area at the toe of the slope, we applied a 9 m (30 ft) buffer (twice our defined depth to failure for shallow landslides) for all of the areas with a calculated factor of safety (FOS) less than 1.5. We tested the methods on three landslide inventory databases examining two main criteria: (1) capture rate (overall and individual landslides) and (2) reduction in total map area susceptibility coverage while maintaining a high capture rate. We found the two methods maintained a capture rate between 90% and 99% while at the same time reducing the total map area susceptibility zones from 64% to 42%.

Abstract More than 80 small volcanoes are scattered throughout the Portland-Vancouver metropolitan area of northwestern Oregon and southwestern Washington. These volcanoes constitute the Boring Volcanic Field, which is centered in the Neogene Portland Basin and merges to the east with coeval volcanic centers of the High Cascade volcanic arc. Although the character of volcanic activity is typical of many monogenetic volcanic fields, its tectonic setting is not, being located in the forearc of the Cascadia subduction system well trenchward of the volcanic-arc axis. The history and petrology of this anomalous volcanic field have been elucidated by a comprehensive program of geologic mapping, geochemistry, 40 Ar/ 39 Ar geochronology, and paleomag-netic studies. Volcanism began at 2.6 Ma with eruption of low-K tholeiite and related lavas in the southern part of the Portland Basin. At 1.6 Ma, following a hiatus of ~0.8 m.y., similar lavas erupted a few kilometers to the north, after which volcanism became widely dispersed, compositionally variable, and more or less continuous, with an average recurrence interval of 15,000 yr. The youngest centers, 50-130 ka, are found in the northern part of the field. Boring centers are generally monogenetic and mafic but a few larger edifices, ranging from basalt to low-SiO 2 andesite, were also constructed. Low-K to high-K calc-alkaline compositions similar to those of the nearby volcanic arc dominate the field, but many centers erupted magmas that exhibit little influence of fluids derived from the subducting slab. The timing and compositional characteristics of Boring volcanism suggest a genetic relationship with late Neogene intra-arc rifting.

Abstract This field trip guide describes a one-day loop from Portland eastward around Mount Hood and returning through the Columbia River Gorge. The purpose is to visit a SNOTEL (SNOwpack TELemetry) site to observe processes and instrumentation applied in automated snowpack data collection, as well as observe geomorphic features related to snowmelt in the western United States. Annual snow accumulation in the higher elevations in the western United States provides a critical source of water for irrigation, hydroelectric power generation, municipal water supplies, and recreation. Snowmelt, however, also can cause various hydrogeologic hazards, such as floods and debris flows.

ABSTRACT Miocene flood basalts of the Columbia River Basalt Group inundated eastern Washington, Oregon, and adjacent Idaho between 17 and 6 Ma. Some of the more voluminous flows followed the ancestral Columbia River across the Cascade arc, Puget-Willamette trough, and the Coast Range to the Pacific Ocean. We have used field mapping, chemistry, and paleomagnetic directions to trace individual flows and flow packages from the Columbia River Gorge westward into the Astoria Basin, where they form pillow palagonite complexes and mega-invasive bodies into older marine sedimentary rocks. Flows of the Grande Ronde, Wanapum, and Saddle Mountains Basalts all made it to the ocean; at least 33 flows are recognized in the western Columbia River Gorge, 50 in the Willamette Valley, 16 in the lower Columbia River Valley, and at least 12 on the Oregon side of the Astoria Basin. In the Astoria Basin, the basalt flows loaded and invaded the wet marine sediments, producing peperite breccias, soft sediment deformation, and complex invasive relations. Mega-invasive sills up to 500 m thick were emplaced into strata as old as Eocene, and invasive dikes up to 90 m thick can be traced continuously for 25 km near the basin margin. Mega-pillow complexes up to a kilometer thick are interpreted as the remains of lava deltas that prograded onto the shelf and a filled submarine canyon southeast of Astoria, possibly providing the hydraulic head for injection of invasive sills and dikes at depth.

Abstract Most of Oregon has been mapped as having low radon potential. Overall, elevated levels of indoor radon are found in only 4% of Oregon homes compared to 8% of homes nationally. Most maps show Portland, Oregon’s largest city, as having low to moderate potential for indoor radon. Using data collected by the Oregon Health Division’s Radiation Protection Services Section, we found Portland to have elevated radon values in 22% of homes. A radon potential map has been produced for 39 zip code regions of Portland based on the rank sums of maximum radon values, average indoor radon values, and the percentage of homes with radon values >4 pCi/1. Eight zip codes have high, 15 moderate, and 16 low radon potential. The maps were constructed by taking the indoor radon values from 1,135 homes, categorizing the data in terms of radon values, and plotting the points geographically by zip codes. Trends became obvious when geologic maps were compared to the areas of radon potential. Most of the high potential sites lie on highly permeable Missoula flood sediments. The data and map of radon potential were presented to the public through television and radio interviews and newspaper articles in June of 1994. The public, already familiar with the zip codes, could understand how to use the map. People in high to moderate categories were strongly encouraged to test their homes. A telephone number was given to receive free information on radon testing and mitigation.