Detailed petrography, microstructure, and geochemistry of garnet pyroxenite xenoliths in Holocene basanite tuffs from maars at Lakes Bullenmerri and Gnotuk (western Victoria, southeastern Australia) have been used to track their igneous and metamorphic history, enabling the reconstruction of the thermal-tectonic evolution of the lithospheric mantle. The exsolution of orthopyroxene and garnet and rare spinel, plagioclase, and ilmenite from complex clinopyroxene megacrysts suggests that the xenoliths originally were clinopyroxene-dominant cumulates associated with minor garnet, orthopyroxene, or spinel. The compositions of exsolved phases and their host clinopyroxene were reintegrated using measured modal proportions to show that the primary clinopyroxene was enriched in Al2O3 (5.53–13.63 wt%) and crystallized at ~1300–1500 °C and 16–30 kbar. These cumulates then underwent extensive exsolution, recrystallization, and reaction during cooling, and finally equilibrated at ~950–1100 °C and 12–18 kbar before entrainment in the basanites. Rare earth element (REE) thermobarometry of garnets and coexisting clinopyroxenes preserves evidence of an intermediate stage (1032 °C and 21 kbar). These results imply that the protoliths of the garnet pyroxenite formed at a range of depths from ~50 to 100 km, and then during or shortly after cooling, they were tectonically emplaced to higher levels (~40–60 km; i.e., uplifted by at least 10–20 km) along the prevailing geotherm. This uplift may have been connected with lithosphere-scale faulting during the Paleozoic orogeny, or during Mesozoic–Cenozoic rifting of eastern Australia.

It is widely assumed that the boundary layer above the core is the source of intraplate volcanoes such as Hawaii, Samoa, and Yellowstone, and that the sub-plate boundary layer at the top of the mantle is thin and entirely subsolidus. In fact, this upper layer is thicker and has higher expansivity, buoyancy, and insulating power than the lower one, and may have higher potential temperatures. The observed seismic structure of the low-velocity zone (LVZ) including attenuation, anisotropy, sharp boundaries, and a reduction of both compressional and shear moduli can be taken as strong evidence for the ubiquitous presence of melt in the upper mantle. If the LVZ contains as little as 1%–2% melt, then it is the most plausible and accessible source for midplate magmas; deeply rooted active upwellings are unnecessary. The upper boundary layer is also the most plausible source of ancient isotopic signatures of these magmas and their inclusions.

The Siberian craton was affected by flood basalt volcanism at least twice during the Devonian (Yakutsk-Vilyui province) and Permian–Triassic (Siberian province) periods. In both cases volcanism appeared as brief pulses of flood basalt eruptions, followed by kimberlitic (and lamproitic) emplacement. Pressure estimations for the kimberlite-entrained mantle xenoliths reflect that the lithosphere was 190–230 km thick at the time of the Devonian flood basalt volcanism. Differently from Devonian kimberlites, the majority of Triassic kimberlites are diamond free, but at least one Triassic kimberlite pipe and some lamproites are diamondiferous, suggesting that the Siberian lithosphere remained thick during the Permian–Triassic flood basalt volcanic activity. If both the lithosphere and the asthenosphere were volatile poor, thick cratonic lithosphere prevented melting even at an elevated geotherm. During the Paleozoic, Siberia was surrounded by subduction systems. The water deep cycle in association with fast subduction and slab stagnation in the mantle transition zone is proposed to cause fluxing of the asthenosphere by water plus other fluids via wet diapir formation in the mantle transition zone. Such diapirs started to melt in the asthenosphere beneath thick cratonic lithosphere, producing voluminous melts. Mafic melts probably accumulated beneath cratonic lithosphere and rapidly erupted on the surface in response to stress-induced drainage events, as assumed for some other cratonic flood basalts.

Understanding the magmatic processes that drive unrest at silicic calderas remains a major goal in Volcanology. Rabaul in Papua New Guinea is an exceptional location because after two decades of unrest and a peak in seismicity and deformation in 1983–85, eruptive activity began in 1994 and is still ongoing. A particularly large sub-Plinian eruption occurred from Tavurvur in October 2006. Whole-rock compositions are andesitic and reflect mixing/mingling between basaltic and dacitic magmas from the same system. The magmas that fed the 2006 eruption were stored at about 930°C, with 1–3 wt% H2O, 25–520 ppm CO2, and 50–2500 ppm SO2 in the melt. Melt inclusions hosted in pyroxene, and plagioclase phenocrysts record fractional crystallization at ≤200 MPa under relatively dry and poorly oxidizing conditions. Magma mixing/mingling is expressed as heterogeneous glass compositions, strongly zoned phenocrysts, and mafic crystal aggregates. A textural maturation from fine, acicular to large, blocky crystal clots implies different relative ages of formation. Modelling the chemical zoning of plagioclase shows that mafic–silicic interactions started a couple of decades prior to the 2006 eruption and continued until days to weeks prior to eruption. Basaltic replenishments have been driving unrest and eruption at the Rabaul caldera since the 1970s.Supplementary material:Tables and figures reporting the composition of the Tavurvur 2006, Kombiu and 1.4 ka BP caldera samples and showing thermodynamic modelling with MELTS are available at http://www.geolsoc.org.uk/SUP18816

Ponding conditions of basalts erupted from fissure zones at São Miguel Island (Azores) were investigated through microthermometry of fluid inclusions, hosted in olivines and clinopyroxenes, and whole-rock and mineral chemistry. The Região dos Picos and Achada das Furnas fissure zones formed between central volcanoes and erupted geochemically similar magmas for the last 30 kyr. Hydrocarbonic fluid inclusions that survived to diffusion and re-equilibration recorded a maximum density value of 1000 kg m−3 (29.3 km) at both fissure zones, at the intersection with the feeding systems of older central volcanoes. The maximum density decreases to 875 kg m−3 (23.5 km) towards the central segment of Região dos Picos. Further trapping of low-density fluids is occasional and limited to a few samples. While the deepest event is interpreted to mark the vertical variation of the Moho at each location, all other events are only representative of short-time ponding with fluid re-equilibration. The deepening of the Moho towards the central volcanoes might be the effect of long-lasting underplating. However, the periodic stretching of the lithosphere, in response to the differential stress field acting at central volcanoes, would have been responsible for the thinning of the crust at the central segment of the fissure zone.Supplementary material:Whole-rock geochemistry with international standard used, and representative analyses of selected mineral phases from the two segments of the Região dos Picos fissure zone is available at www.geolsoc.org.uk/SUP18818

Crustal xenoliths are key subvolcanic material for studying processes that operate in a magma dyke during intrusion into its surrounding country rock. The Biot number is the appropriate parameter to advance knowledge of the rock–magma thermal interaction. We present an interactive approach that combines the petrological study of natural subvolcanic samples, through crustal xenoliths, which represents an essential pilot to explore and constrain the input parameters and boundary conditions in numerical simulations of fluid dynamics under a volcano. Our results – as a function of different dyke depths, aspect ratios and temperature gradients at the host and dyke – allow an accurate interpretation of the thermal history of magma flow in the dyke, revealing significant differences in heat transfer and thermal resistance between the crust and ascending magma. Conclusively, melt flow within rigid-walled channels depends directly on the depth (pressure gradient) and width of the dyke according to a balance between the rate of magma input and heat loss that determines how fast the magma may ascend. In addition, and with implications for crustal assimilation, there is evidence of a strong relationship between the preconditioning temperature and the integrity of the host rock over the time that xenoliths are immersed in the magma dyke.

The Triassic Qiangtang metamorphic belt in central Tibet consists of eclogite- and blueschist-bearing tectonic mélange exposed in an intracontinental setting. Study of the belt has yielded insight about the tectonic history and crustal architecture of the Qiangtang terrane. Weakly deformed mafic blocks exhibiting high-pressure, low-temperature metamorphic mineral assemblages are exposed within a greenschist facies sedimentary-matrix mélange over an east-west distance of ~600 km and north-south distance of ~150 km. Everywhere it has been mapped, the Qiangtang mélange is exposed in the footwalls of Late Triassic–Early Jurassic domal, low-angle normal faults. The hanging walls of these normal faults are composed of late Paleozoic to early Mesozoic metasedimentary and crystalline rocks; similar lithologies are exposed in footwall mélange rocks. High-pressure metamorphism occurred during Middle Triassic time. Regional geological mapping and provenance of detrital zircon crystals from late Paleozoic to Mesozoic supracrustal rocks of the Qiangtang terrane indicate that Qiangtang crust exposed on the north and south sides of the metamorphic belt are of Gondwanan affinity. This is at odds with the widely held belief that the Qiangtang metamorphic belt marks a suture between a Gondwanan affinity southern and/ or western Qiangtang terrane and a Cathayasian affinity northern and/or eastern Qiangtang terrane. Furthermore, metasedimentary rocks exposed within the metamorphic belt yield detrital zircon age probability distributions consistent with derivation from Qiangtang terrane supracrustal strata and Paleo-Tethys affinity rocks exposed north of the Qiangtang terrane. These data, along with the significant north-south surface exposure of the metamorphic belt, suggest that a large part of the lower to middle crust is composed of silica-rich metasedimentary-dominated mélange rock that formed during Middle Triassic southward subduction along the Jinsha suture on the northern edge of the Qiangtang terrane. The implied crustal structure, which is also defined by geophysical experiments, provides an explanation for the apparent deviation from Airy isostasy from the Lhasa terrane to the Qiangtang terrane. We suggest that the replacement or partial incorporation of mafic crystalline middle to lower crust with less dense metasedimentary mélange rock led to a significant contribution of Pratt isostasy across central Tibet.

The Peninsular Ranges batholith north of latitude 33°N consists of five distinctive longitudinal batholith zones. Four zones are autochthonous—a western zone, western transition zone, eastern transition zone, and an eastern zone. The fifth zone, the upper-plate zone, is allochthonous. The western zone, western transition zone, eastern transition zone, and eastern zone are contiguous products of Cretaceous subduction transitioning from a Mesozoic oceanic-arc setting to continental margin arc setting. Within the autochthonous zones, the nature and geochemistry of plutons record changes reflecting subduction proceeding from west to east over a 35 m.y. period. The allochthonous upper-plate zone is structurally located above the regional Eastern Peninsular Ranges mylonite zone. Host rocks for the western zone, western transition zone, and eastern transition zone are mostly Mesozoic, and host rocks of the eastern zone are Paleozoic. The composition of the plutons reflects changes in magma originating in shallow oceanic crust in the western zone to a deeper continental marginal setting in the eastern zone and upper-plate zone. Several aspects of the upper-plate zone rocks set them apart from the autochthonous batholithic rocks. Western zone magmatism occurred during an extensional subduction phase that involved Mesozoic oceanic crust. Plutons were emplaced passively from 126 Ma to 108 Ma, forming 47.9% of the area of the autochthonous batholith at a rate of 2.7% per million years. Geochemical variation is greater in the western zone than it is in the other zones. Rock compositions range from gabbro to high-SiO2 granites; plutons in this zone contain magnetite as an accessory mineral. Most plutonic rocks have initial 87Sr/86 Sr (Sri) values <0.7045, initial 206Pb/204 Pb (Pbi) <19, δ18O <9‰, and positive initial epsilon Nd (εNdi). By 111 Ma, conditions for pluton emplacement began to change radically from extensional to compressional as subduction encountered older continental crust. The boundary between the western zone and western transition zone is marked clearly by a change in the magnetic properties, which are highly magnetic in the western zone to weakly magnetic in the transition zones. Western transition zone plutons, which have affinities with the western zone plutons, constitute 13.5% by area of the autochthonous batholith and formed over 13 m.y. at a decreased rate of batholith formation, 1% per million years. Plutons of the western transition zone are characterized by Sri values of 0.7045–0.7050, δ18O <9‰, and positive εNdi. Deformation of the prebatholithic rocks was intense at 100 Ma, as the plutonism of the western transition zone ended and emplacement in the eastern transition zone began. From 99 to 93 Ma, the rate of magma emplacement accelerated, forming 2.4% per million years by area of the northern part of the autochthonous batholith. The eastern transition zone plutons, having affinities with the eastern zone plutons, have Sri values of 0.7051–0.7057, δ18O >9‰, and negative εNdi. Most eastern transition zone plutons were emplaced in a less dynamic setting than the western transition zone plutons. By 98 Ma, subduction had transitioned eastward as plutons were emplaced in continental crust. The rate of magma emplacement increased to form the eastern zone over 7 m.y., or a rate of batholith growth of 3.4% per million years by area. There is considerable temporal overlap in the magma emplacement of the eastern transition zone and the eastern zone. Combined eastern transition zone and eastern zone magmatism produced 39% (by area) of the autochthonous batholith in 8 m.y. at a rate of ~5% per million years. The 102 Ma gabbro body is not considered in this analysis. Eastern zone plutons are characterized by Sri >0.7060, mostly in the range of 0.7061–0.7076, Pbi >19, δ18O >9‰, and a large negative εNdi. The allochthonous granitic sheets that constitute the upper-plate zone include batholithic rocks ranging in age from 92 to 75 Ma; most are in the range of 86–75 Ma. These granitic rocks have a more restricted range of geochemistry than those in the other zones; they are magnetite-bearing rocks, unlike the ilmenite-bearing granitic rocks of the transition zones and eastern zone, and they have large negative εNdi, and Sri in the range of 0.7076–0.7084. During the Late Cretaceous, the Eastern Peninsular Ranges mylonite zone developed in the eastern part of the Peninsular Ranges Province, deforming granitic rocks of the eastern part of the eastern zone. Following mylonitization, westward displacement on a series of low-angle thrust faults placed sheets of metamorphic and plutonic rock above the Eastern Peninsular Ranges mylonite zone, forming the upper-plate zone. Compatible elements decrease west to east across the batholith, and incompatible elements increase. Geochemical variation shows that magma forming the western part of the batholith had a shallow and primitive source compared with the eastern part, which had a deeper and more-evolved continental component. The frequency distribution of Sri in the batholith is bimodal, having a peak of 0.7038 in the western zone, reflecting the oceanic crustal source, and a peak of 0.7072 in the eastern zone, reflecting increased incorporated continental crust sources. Only a small part of the batholith has Sri values between 0.7055 and 0.7065, indicating a relatively sharp boundary between oceanic and continental crust. Linear arrays on Harker diagram indicate that geochemical variation within the batholith is from magma mixing and not magmatic differentiation. Our data are most simply explained by the Cretaceous arc transitioning from a Mesozoic oceanic-arc setting to a continental margin setting.

The Lakeview Mountains pluton is a concordant teardrop-shaped pluton located at a marked deflection of the structural grain of the prepluton rocks within the northern Peninsular Ranges batholith. This dynamically emplaced 100 Ma pluton lies within the western transition zone and consists of biotite-hornblende tonalite that lacks K-feldspar. The pluton is characterized by ubiquitous schlieren that range from black hornblende-biotite rock to near-white quartz-plagioclase rock, imparting an extreme outcrop-scale mineral and chemical heterogeneity to the pluton. Geometrically, the schlieren define three structural sets; one is concordant, and the other two constitute a northeast- and northwest-oriented conjugate set. The orientation of the concordant schlieren resulted from the outward expansion of the pluton, and the orientation of the conjugate set is in response to regional stresses at the time of emplacement. Based on chemical analysis of systematically collected samples, the pluton consists of two chemically distinct parts. Initially emplaced magma formed an ellipsoidal body concordant with the regional northwest structural grain. This early-emplaced magma formed a zoned body having a relatively potassic core and a mafic outer part. Later-emplaced magma expanded the pluton to the north-northeast, deflecting the regional structural grain of the batholith, and forming the teardrop-shaped outline of the composite pluton. The later-emplaced magma was more mafic than the initial magma, producing a more mafic core and a relatively higher-potassium outer part. Variations in major and trace elements, specific gravity, magnetic susceptibility, and magnetite content, in addition to aeromagnetic and pseudogravity anomalies, all show similar patterns within the pluton. Bodies of hypersthene gabbro, large masses of melanocratic and leucocratic tonalite, and numerous potassic granitic pegmatite dikes are concentrated in the more mafic part of the pluton, and interpreted as the last to crystallize. The leucocratic and melanocratic tonalite bodies are interpreted to be late-emplaced giant schlieren. Initial 87Sr/86Sr ratios (Sri) have only subtle, limited systematic variation, reflecting a relatively uniform magma source. Rb/Sr ratios also are relatively constant from the early- to late-emplaced magma, indicating the absence of, or only slight, fractional crystallization from the early- to late-emplaced magma. Sri values of the hypersthene gabbro, mafic enclaves, and granitic pegmatites are the same as the tonalite of the pluton. The deflection of the regional structural grain by outward expansion of the pluton is interpreted to be a result of dynamic emplacement of the magma. Highly attenuated mafic enclaves in a prepluton mixed granitic rock unit that partly surrounds the pluton are also interpreted to have developed in response to outward expansion during the dynamic emplacement. A comb-layered gabbro, located along the contact of the earlier-formed part of the pluton, is interpreted as an early water-rich magma emplaced in a border area of the pluton protected from primary flow and dynamic strain. The high-potassium pegmatite bodies are interpreted to have formed from residual, immiscible, water-charged fluids derived from the low-potassium tonalite magma, which are concentrated in the mafic last part of the pluton to crystallize.

Day 4 of the Field Forum is dedicated entirely to the magmatic evolution of the Tuolumne Intrusive Complex. The Tuolumne Intrusive Complex is mostly located in Yosemite National Park and is superbly exposed due to a series of glaciations that started 2–3 million years ago and ended ca. 10,000 yr B.P. one of the many reasons why it has become one of the most studied intrusions in the world. We will be driving from Mammoth Lakes to Yosemite National Park taking Hwy 395 north and then Hwy 120 west crossing the entire Tuolumne Intrusive Complex before we start off at its western margin. On this side, the Tuolumne Intrusive Complex intruded into the rocks of the Yosemite Valley Intrusive Suite, Sentinel, and Yosemite Creek granitoids (Day 3). Today we will make stops along Hwy 120 while traversing the Tuolumne Intrusive Complex from west to east ( Fig. 4-1) looking at exposures near the road and discussing field data, structural geology, geochronology, and geochemistry from the Tuolumne Intrusive Complex…

This two-day trip highlights new findings from structural, stratigraphic, and petrologic research in the Valley and Ridge province of Highland, Bath, and Augusta Counties, Virginia, and Pendleton County, West Virginia. The structural emphasis on Days 1 and 2 will be at several scales, from the regional scale of folds and faults across the Valley and Ridge, to outcrop-and hand sample-scale structures. Stops will highlight deformation associated with previously unmapped faults and a second-order anticline in Silurian and Lower Devonian carbonate and siliciclastic strata, specifically the Silurian Tonoloway Limestone, the Silurian–Devonian Helderberg Group, and the Devonian Needmore Shale. The stops on Day 1 will also focus on facies changes in Silurian sandstones, the stratigraphy of the Keyser–Tonoloway formational contact, and new discoveries relevant to the depositional setting and regional facies of the McKenzie Formation in southern Highland County. The focus of the stops on Day 2 will be on the petrology and geochemistry of several exposures of the youngest known volcanic rocks (Eocene) in the eastern United States. Discussions will include the possible structural controls on emplacement of these igneous rocks, how these magmas and their xenoliths constrain the depth and temperature of the lower crust and mantle, and the tectonic environment that facilitated their emplacement.

This field guide describes a three-day trip from Vancouver, British Columbia, to the Wells Gray–Clearwater volcanic field (WGCVF) in east-central British Columbia. The WGCVF is the site of transitional to alkali olivine basaltic volcanism erupted over the last three million years. The small volume magmas (<1 km3) erupted along preexisting normal faults related to the late stages of Cordilleran terrane amalgamation, along the boundary between the miogeoclinal and pericratonic rocks of the Kootenay terrane and the allochthonous Slide Mountain and Quesnellia terranes west of ancestral North America. The magmas are highly enriched in incompatible elements, especially large-ion lithophile elements, and are interpreted as the result of low degrees of partial melting of a heterogeneous, metasomatized mantle. Upon ascent through the crust, they carried up both crustal and mantle xenoliths. During the eruptive period of the WGCVF, at least four glacial periods have occurred. The interplay between volcanism and glaciation is captured in the wide range of volcanic features found in the region. Field trip participants will view numerous diverse volcanic landforms and deposits: from tuyas to ice-marginal valley-edge deposits, volcanoclastic-lacustrine deposits, and associated pillow lavas and hyaloclastites.

Tascotal Mesa fault is the principal component of Tascotal Mesa transfer zone within the Rio Grande rift of Texas (USA) and Chihuahua (Mexico). Strata and structures along the zone attest to ~290 m.y. of tectonic and magmatic activity, from at least late Paleozoic time onward. The transfer zone comprises the Tascotal Mesa and newly documented Christmas Mountains–Grapevine Hills faults, as well as the Terlingua Creek pull-apart complex at the right step between those two dextral zones. Strike-slip (to ~1 km) and dip-slip (to ~735 m) displacements have occurred in the zone during the past 30–27 m.y.; young faults of the transfer zone displace mid-Pleistocene caliches. Stable isotope and palynologic data from travertines in the transfer zone indicate ascent of warm waters (25°–35 °C) along faults as recently as mid- to late Pleistocene time. Older, basement-rooted structural anisotropies are present in the Tascotal Mesa transfer zone but not all have been reactivated during Cenozoic rifting. Geophysically constrained physical models integrated with field data demonstrate that the Terlingua Creek pull-apart basin likely formed in cover strata that were detached from basement, as the orientations of surficial and buried basement structures differ markedly. Dip-slip displacement predominates on pull-apart faults, with significant dextral slip. Analysis of the role of the Tascotal Mesa transfer zone in Rio Grande rifting revealed that it and the flanking grabens (Presidio to the northwest; Redford to the southeast) are all parts of the Border Corridor transform zone. This transform zone interconnects rift segments from Mesilla graben to the Sunken Block and includes both transfer zones and grabens. Right-transtensional deformation, as manifested in historic earthquakes, accounts for differing orientations of transform (northwest) versus rift (north) grabens. Petrographic and geochronologic data indicate ascent of lavas of rift geochemical character in both the Tascotal Mesa transfer zone and the Border Corridor transform zone from ca. 30 Ma onward. K-Ar ages were determined for basalt (24.73 ± 1.96 Ma) and trachyte (25.42 ± 0.64 Ma) emplaced within the Tascotal Mesa transfer zone. Magmatism is bimodal; olivine basalt and/or hawaiite predominates. Basalts at the junctions of rift grabens and the Border Corridor transform zone entrain mantle and lower-crustal xenoliths.

Surface, unsaturated-zone, and saturated-zone hydrologic conditions at Yucca Mountain responded to past climate variations and are at least partly preserved by sediment, fossil, and mineral records. Characterizing past hydrologic conditions in surface and subsurface environments helps to constrain hydrologic responses expected under future climate conditions and improve predictions of repository performance. Furthermore, these records provide a better understanding of hydrologic processes that operate at time scales not readily measured by other means. Pleistocene climates in southern Nevada were predominantly wetter and colder than the current interglacial period. Cyclic episodes of aggradation and incision in Fortymile Wash, which drains the eastern slope of Yucca Mountain, are closely linked to Pleistocene climate cycles. Formation of pedogenic cement is favored under wetter Pleistocene climates, consistent with increased soil moisture and vegetation, higher chemical solubility, and greater evapotranspiration relative to Holocene soil conditions. The distribution and geochemistry of secondary minerals in subsurface fractures and cavities reflect unsaturated-zone hydrologic conditions and the response of the hydrogeologic system to changes in temperature and percolation flux over the last 12.8 m.y. Physical and fluid-inclusion evidence indicates that secondary calcite and opal formed in air-filled cavities from fluids percolating downward through connected fracture pathways in the unsaturated zone. Oxygen, strontium, and carbon isotope data from calcite are consistent with a descending meteoric water source but also indicate that water compositions and temperatures evolved through time. Geochronological data indicate that secondary mineral growth rates are less than 1–5 mm/m.y., and have remained approximately uniform over the last 10 m.y. or longer. These data are interpreted as evidence for hydrological stability despite large differences in surface moisture caused by climate shifts between the Miocene and Pleistocene and between Pleistocene glacial-interglacial cycles. Secondary mineral distribution and δ18O profiles indicate that evaporation in the shallower welded tuffs reduces infiltration fluxes. Several near-surface and subsurface processes likely are responsible for diverting or dampening infiltration and percolation, resulting in buffering of percolation fluxes to the deeper unsaturated zone. Cooler and wetter Pleistocene climates resulted in increased recharge in upland areas and higher water tables at Yucca Mountain and throughout the region. Discharge deposits in the Amargosa Desert were active during glacial periods, but only in areas where the modern water table is within 7–30 m of the surface. Published groundwater models simulate water-table rises beneath Yucca Mountain of as much as 150 m during glacial climates. However, most evidence from Fortymile Canyon up gradient from Yucca Mountain limits water-table rises to 30 m or less, which is consistent with evidence from discharge sites in the Amargosa Desert. The isotopic compositions of uranium in tuffs spanning the water table in two Yucca Mountain boreholes indicate that Pleistocene water-table rises likely were restricted to 25–50 m above modern positions and are in approximate agreement with water-table rises estimated from zeolitic-to-vitric transitions in the Yucca Mountain tuffs (less than 60 m in the last 11.6 m.y.).