1-20 OF 242 RESULTS FOR

Yellowstone ice cap

Results shown limited to content with bounding coordinates.
Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Article
Journal: Geology
Published: 01 December 2007
Geology (2007) 35 (12): 1107–1110.
.... Paleoseismological data suggest that ∼70% of the postglacial slip on the southern Teton fault accumulated during or shortly after deglaciation, before 8 ka. Here, we use a three-dimensional finite-element model to show that melting of the Yellowstone ice cap and the valley glaciers in the Teton Range may have caused...
FIGURES
First thumbnail for: Postglacial slip-rate increase on the Teton normal...
Second thumbnail for: Postglacial slip-rate increase on the Teton normal...
Third thumbnail for: Postglacial slip-rate increase on the Teton normal...
Journal Article
Journal: Geology
Published: 01 December 2001
Geology (2001) 29 (12): 1095–1098.
...Joseph M. Licciardi; Peter U. Clark; Edward J. Brook; Kenneth L. Pierce; Mark D. Kurz; David Elmore; Pankaj Sharma Abstract Cosmogenic 3 He and 10 Be ages measured on surface boulders from the moraine sequence deposited by the northern outlet glacier of the Yellowstone ice cap indicate...
FIGURES
First thumbnail for: Cosmogenic 3 He and 10 Be chronologies of the late...
Second thumbnail for: Cosmogenic 3 He and 10 Be chronologies of the late...
Image
Location map of the Teton Range (Wyoming, USA) with the simplified surface trace of the Teton fault (black solid line with bars on downthrown side). Black and white triangles mark the peaks of Grand Teton (4197 m) and Mount Moran (3842 m), respectively. Transparent white area with gray outline marks the southern extent of the Last Glacial Maximum (LGM) Yellowstone ice cap, which reached a thickness of ~1 km farther north on the Yellowstone Plateau, and of the LGM Teton Range valley glaciers, which reached ice thicknesses of several hundred meters (Love, 2003; Licciardi and Pierce, 2018). Note that Jenny Lake is located at the southern margin of the former Yellowstone ice cap (Licciardi and Pierce, 2018). ID—Idaho; MT—Montana; WY—Wyoming.
Published: 21 July 2021
outline marks the southern extent of the Last Glacial Maximum (LGM) Yellowstone ice cap, which reached a thickness of ~1 km farther north on the Yellowstone Plateau, and of the LGM Teton Range valley glaciers, which reached ice thicknesses of several hundred meters ( Love, 2003 ; Licciardi and Pierce
Journal Article
Journal: Geosphere
Published: 21 July 2021
Geosphere (2021) 17 (5): 1517–1533.
... outline marks the southern extent of the Last Glacial Maximum (LGM) Yellowstone ice cap, which reached a thickness of ~1 km farther north on the Yellowstone Plateau, and of the LGM Teton Range valley glaciers, which reached ice thicknesses of several hundred meters ( Love, 2003 ; Licciardi and Pierce...
FIGURES
First thumbnail for: Postglacial slip distribution along the Teton norm...
Second thumbnail for: Postglacial slip distribution along the Teton norm...
Third thumbnail for: Postglacial slip distribution along the Teton norm...
Journal Article
Journal: Geosphere
Published: 01 April 2017
Geosphere (2017) 13 (2): 287–300.
... influenced the range front during marine isotope stages 2 and 3. However, fault offset rate variability, suggested by previous work to be attributable to Yellowstone ice cap deglacial processes, suggests that the fault scarp height pattern might also be interpreted as a reflection of strongly variable offset...
FIGURES
First thumbnail for: Systematic variation of Late Pleistocene fault sca...
Second thumbnail for: Systematic variation of Late Pleistocene fault sca...
Third thumbnail for: Systematic variation of Late Pleistocene fault sca...
Image
Figure 1. Moraine groups in four valleys of southeastern Sawtooth Mountains, delineated by relative-weathering criteria. We infer that two moraine groups are separated in age by at least 10 k.y. Inset map shows locations of Sawtooth Mountains glaciers (SMG), Wallowa Mountains glaciers (WMG), Puget Lobe of Cordilleran Ice Sheet (CIS), and Yellowstone ice cap (YIC).
Published: 01 March 2004
Lobe of Cordilleran Ice Sheet (CIS), and Yellowstone ice cap (YIC).
Image
(a) Location of topographic swath profile used by [30] to compare with flexural-kinematic model results. Footwall swath is moved south of the Yellowstone ice cap boundary in order to capture the flexural bulge removed by the ice cap. (b) Base case model used for calculating the contributions of footwall uplift and hanging wall drop to total fault displacement. Difference between the modeled profile (orange) and the observed profile (blue and gray) results from a lack of footwall erosion in the modeled profile. (c, d) Additional model results of [30] and comparisons with the observed topography.
Published: 27 October 2021
Figure 8 (a) Location of topographic swath profile used by [ 30 ] to compare with flexural-kinematic model results. Footwall swath is moved south of the Yellowstone ice cap boundary in order to capture the flexural bulge removed by the ice cap. (b) Base case model used for calculating
Image
Geomorphic, glacial, and geologic context of study area. Thick line shows fault scarps mapped through interpretation of lidar (light detection and ranging) data. Pinedale 1–3 and Bull Lake moraines were constructed by the Yellowstone ice cap outlet glacier. The outlet glacier filled Jackson Hole during the Bull Lake glaciation (marine isotope stage, MIS 6), but terminated at the northern edge of the study area during the Pinedale glaciation (MIS 2). Ice cap limits are from Licciardi and Pierce (2008). Small box shows the Taggart Lake area, a focus of this study.
Published: 01 April 2017
Figure 1. Geomorphic, glacial, and geologic context of study area. Thick line shows fault scarps mapped through interpretation of lidar (light detection and ranging) data. Pinedale 1–3 and Bull Lake moraines were constructed by the Yellowstone ice cap outlet glacier. The outlet glacier filled
Image
Figure 1. Glacial deposits in northern Yellowstone area. Adapted  from Pierce (1979). A: Northern Yellowstone ice cap. Thick black  lines with double-pointed arrows indicate main ice divides of various  ice masses that fed northern Yellowstone outlet glacier. Open arrows  indicate flow directions of major ice drainage ways. B: Sample sites  on Eightmile and Chico moraines. Sites are concentrated in areas  that contained largest and most suitable boulders. Dashed lines  show prominent crests in Chico moraine complex. Three sampled  boulders located 2 km south-southwest of town of Pray are considered  to belong to proximal part of Eightmile moraines. C: Sample  sites on Deckard Flats moraines and late-glacial flood deposit. Individual  sample sites on Deckard Flats moraines (dark stipple) are  clustered in location marked × and sites on flood bar are clustered  within outline of deposit. Travertine deposits are those used by Sturchio  et al. (1994) to construct their U-series chronology (see text)
Published: 01 December 2001
Figure 1. Glacial deposits in northern Yellowstone area. Adapted from Pierce (1979) . A: Northern Yellowstone ice cap. Thick black lines with double-pointed arrows indicate main ice divides of various ice masses that fed northern Yellowstone outlet glacier. Open arrows indicate flow directions
Image
Figure 1. Location map of Teton Range and surface trace of Teton fault (black solid line with bars on downthrown side). Note drainage divide (solid gray line) located west of range crest (dashed line). Light-gray line marks southern rim of Yellowstone ice cap (Love et al., 2003). Black and white triangles mark peaks of Grand Teton (4197 m) and Mt. Moran (3842 m), respectively.
Published: 01 December 2007
Figure 1. Location map of Teton Range and surface trace of Teton fault (black solid line with bars on downthrown side). Note drainage divide (solid gray line) located west of range crest (dashed line). Light-gray line marks southern rim of Yellowstone ice cap ( Love et al., 2003 ). Black and white
Image
Figure 3. Results of experiments with a viscoelastic lower crust. Loading history (A) and slip histories (B–D) from experiments without loading (dashed line), with loading by Teton glaciers only (dotted line), and with loading by both Teton glaciers and Yellowstone ice cap (solid line) are shown for points N (B), C (C), and S (D). For location of points, see Figure 2B. Note that time axis shows time interval from onset of loading to present; the previous 106 model years, during which fault reached steady-state slip rate, are not shown (see Fig. DR1 for the entire slip history at point C [see text footnote 1]).
Published: 01 December 2007
Figure 3. Results of experiments with a viscoelastic lower crust. Loading history (A) and slip histories (B–D) from experiments without loading (dashed line), with loading by Teton glaciers only (dotted line), and with loading by both Teton glaciers and Yellowstone ice cap (solid line) are shown
Image
Figure 2. Setup of finite-element model. A: Perspective view of model lithosphere consisting of upper crust, lower crust, and lithospheric mantle. Rheological parameters are density (ρ), elastic modulus (E), Poisson's ratio (ν), viscosity (η), acceleration due to gravity (g), velocity (v), and lithostatic pressure (Plitho). Fault slip is controlled by a Mohr-Coulomb failure criterion (μ: coefficient of friction). Lithosphere is extended in x direction at a velocity of 3 mm/yr on both sides. Model sides in x-z plane are fixed in y direction. B: Map view of Yellowstone ice cap, Teton valley glaciers, and Jackson Lake as implemented in model. Numbers show ice thickness in meters. White circles labeled N, C, and S mark points on model fault for which results are shown in Figure 3.
Published: 01 December 2007
), and lithostatic pressure ( P litho ). Fault slip is controlled by a Mohr-Coulomb failure criterion (μ: coefficient of friction). Lithosphere is extended in x direction at a velocity of 3 mm/yr on both sides. Model sides in x - z plane are fixed in y direction. B: Map view of Yellowstone ice cap, Teton
Image
A: Distribution of Pinedale glaciers in western United States (gray, after Porter et al., 1983) and locations of published chronologies synthesized here. AR—Animas River valley, San Juan Mountains; MBC—Middle Boulder Creek valley, Front Range; WU—western Uinta Mountains; FL—Fremont Lake, Wind River Range; TR—Teton Range; NWY—northwest Yellowstone ice cap; WA—Wallowa Mountains; IC—Icicle Creek, northeastern Cascade Range; BC—Bishop Creek, Sierra Nevada. B: Upper Arkansas River study area showing 10Be ages with 1σ uncertainty; gray boxes are 10Be ages from previous studies (br—bedrock; mb—moraine boulder; mc—moraine clast; mb/p—moraine boulders and pebbles; tb—terrace boulder). LCV—Lake Creek valley; CCV—Clear Creek valley; PCV—Pine Creek valley. Star—Vantage point of Figure DR2 (see footnote 1).
Published: 01 February 2011
Lake, Wind River Range; TR—Teton Range; NWY—northwest Yellowstone ice cap; WA—Wallowa Mountains; IC—Icicle Creek, northeastern Cascade Range; BC—Bishop Creek, Sierra Nevada. B: Upper Arkansas River study area showing 10 Be ages with 1σ uncertainty; gray boxes are 10 Be ages from previous studies (br
Image
Map showing the detailed surface traces of the Teton fault and Jackson Hole intrabasin faults (red solid line with bars on downthrown side; from Zellman et al., 2019). Dashed black lines outline the northern, central, and southern sections of the Teton fault, respectively (after DuRoss et al., 2021). Transparent white area with gray outline marks the southern extent of the Last Glacial Maximum (LGM) Yellowstone ice cap (Licciardi and Pierce, 2018). White stars indicate the location of paleoseismological trench sites (GC—Granite Canyon [Byrd et al., 1994]; BB—Buffalo Bowl [DuRoss et al., 2020]; LL—Leigh Lake [Zellman et al., 2020]; SM—Steamboat Mountain [DuRoss et al., 2021]). Orange star and circle mark the location of the Jenny Lake (JL) sediment record and dated landslide boulders, respectively (Larsen et al., 2019). Dark and light green circles indicate locations where 10Be exposures ages have been determined for moraines and glacially scoured bedrock, respectively (Licciardi and Pierce, 2018; preliminary ages from Pierce et al. [2018] are shown in italics). Yellow squares mark the locations where Byrd et al. (1994) and Thackray and Staley (2017) determined scarp height and vertical separation values from scarp profiles. Dark gray rectangles indicate areas shown in Figures 6B and 6C. C.—Canyon; L.—Lake; Gl—Glacier Gulch; SD—Stewart Draw. Black and white triangles mark the peaks of Grand Teton (4197 m) and Mount Moran (3842 m), respectively.
Published: 21 July 2021
DuRoss et al., 2021 ). Transparent white area with gray outline marks the southern extent of the Last Glacial Maximum (LGM) Yellowstone ice cap ( Licciardi and Pierce, 2018 ). White stars indicate the location of paleoseismological trench sites (GC—Granite Canyon [ Byrd et al., 1994 ]; BB—Buffalo Bowl
Journal Article
Journal: Geology
Published: 01 March 2004
Geology (2004) 32 (3): 225–228.
... Lobe of Cordilleran Ice Sheet (CIS), and Yellowstone ice cap (YIC). ...
FIGURES
First thumbnail for: Latest Pleistocene alpine glacier advances in the ...
Second thumbnail for: Latest Pleistocene alpine glacier advances in the ...
Journal Article
Journal: Geology
Published: 01 January 2004
Geology (2004) 32 (1): 81–84.
... - 224 . Licciardi , J.M. , Clark , P.U. , Brook , E.J. , Pierce , K.L. , Kurz , M.D. , Elmore , D. , and Sharma , P. , 2001 , Cosmogenic 3 He and 10 Be chronologies of the late Pinedale northern Yellowstone ice cap, Montana, USA : Geology , v. 29 p. 1095 - 1098...
FIGURES
First thumbnail for: Variable responses of western U.S. glaciers during...
Second thumbnail for: Variable responses of western U.S. glaciers during...
Third thumbnail for: Variable responses of western U.S. glaciers during...
Journal Article
Published: 01 March 2010
Journal of the Geological Society (2010) 167 (2): 385–399.
...-and-Range Province was occupied by the huge predecessor of the Great Salt Lake, the up to 350 m deep Lake Bonneville (e.g. Gilbert 1890 ; Oviatt et al . 1992 ), and the c . 1000 m thick Yellowstone ice-cap, which covered the Yellowstone Plateau and its surroundings ( Pierce et al . 1976 ; Pierce 1979...
FIGURES
First thumbnail for: Slip rate variations on faults during glacial load...
Second thumbnail for: Slip rate variations on faults during glacial load...
Third thumbnail for: Slip rate variations on faults during glacial load...
Journal Article
Journal: Geology
Published: 01 October 2006
Geology (2006) 34 (10): 841–844.
... northern Yellowstone ice cap, Montana, USA : Geology , v. 29 p. 1095 – 1098 doi: 10.1130/0091-7613(2001)029<1095:CHABCO>2.0.CO;2. Licciardi , J.M. , Clark , P.U. , Brook , E.J. , Elmore , D. , and Sharma , P. , 2004 , Variable response of western U.S. glaciers during...
FIGURES
First thumbnail for: Latest Pleistocene advance of alpine glaciers in t...
Second thumbnail for: Latest Pleistocene advance of alpine glaciers in t...
Third thumbnail for: Latest Pleistocene advance of alpine glaciers in t...
Series: GSA Field Guide
Published: 01 January 2014
DOI: 10.1130/2014.0037(09)
EISBN: 9780813756370
... on the plateau to ~1000 m (3000 ft) thickness and flowed outward down the major valleys that drain Yellowstone National Park (Fig. 2 ). During deglaciation, the plateau ice cap stagnated, and glaciers from the adjacent mountains flowed into terrain previously occupied by the plateau ice cap ( Pierce, 1979...
Journal Article
Journal: Geology
Published: 01 February 2017
Geology (2017) 45 (2): 171–174.
... Be chronologies of the late Pinedale northern Yellowstone ice cap, Montana, USA : Geology , v. 29 , p. 1095 – 1098 , doi:10.1130/0091-7613(2001)029<1095:CHABCO>2.0.CO;2. Licciardi , J.M. , Clark , P.U. , Brook , E.J. , Elmore , D. , and Sharma , P. , 2004 , Variable responses...
FIGURES
First thumbnail for: Combining radiocarbon and cosmogenic ages to const...
Second thumbnail for: Combining radiocarbon and cosmogenic ages to const...