1-20 OF 28 RESULTS FOR

Steamboat-Fraser Trend

Results shown limited to content with bounding coordinates.
Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Article
Published: 10 January 2002
Canadian Journal of Earth Sciences (2003) 40 (1): 1–11.
... of these, the SteamboatFraser trend, is a north–south-striking feature that projects from the foreland belt in northeastern British Columbia, where it becomes subparallel to anomalies east of the Mackenzie Mountains, southward to the northern limit of the Fraser River strike-slip fault, a distance of about 600 km...
FIGURES | View All (9)
Image
Magnetic anomaly map of the same region as shown in Fig. 1 (Geological Survey of Canada 1999b). GBma, Great Bear magmatic arc; SF, Steamboat–Fraser trend. Other abbreviations as in Figs. 1 and 2.
Published: 23 September 2005
Fig. 3. Magnetic anomaly map of the same region as shown in Fig.  1 ( Geological Survey of Canada 1999 b ). GBma, Great Bear magmatic arc; SF, SteamboatFraser trend. Other abbreviations as in Figs.  1 and 2 .
Image
Schematic interpretation illustrating the possible linear zone of high-density rock along the Steamboat–Fraser trend. The linearity of the trend is suggested to be a deep-seated feature, such as a dike or fault (dotted pattern) whose age is unknown. High-density and high magnetic susceptibility rocks in the upper crust are shown as dikes and volcanics that migrated upward and were extruded in a few areas, but remained at depth elsewhere. In the south, the shallow magnetic rocks are located east of the gravity trend (Fig. 5c). A possible interpretation of this is that mafic rocks intruded at a shallow level laterally offset from a deep source. CDF, Cordilleran deformation front; TT–NRMT, Tintina Trench – northern Rocky Mountain Trench.
Published: 10 January 2002
Fig. 9. Schematic interpretation illustrating the possible linear zone of high-density rock along the SteamboatFraser trend. The linearity of the trend is suggested to be a deep-seated feature, such as a dike or fault (dotted pattern) whose age is unknown. High-density and high magnetic
Image
Correlation of seismic structure to gravity and magnetic profiles along the western half of SNORCLE line 1. The horizontal line at about 25 km is the approximate position of the Curie depth and is thus the approximate subsurface limit of magnetic response. Vertical lines are drawn from this depth to the magnetic profile where important magnetic anomalies are seen. Note the correlation of shallow structures to magnetic anomalies (e.g., at M1–M5). Vertical green lines are drawn from important gravity anomalies and correspond to deeper structures. FS1 and FS2, west and east peaks, respectively, of Fort Simpson anomaly; FS, Steamboat–Fraser trend. V.E., vertical exaggeration.
Published: 23 September 2005
, respectively, of Fort Simpson anomaly; FS, SteamboatFraser trend. V.E., vertical exaggeration.
Image
(a) Unfiltered magnetic data of region near Steamboat–Fraser (SF) trend identified from gravity data. Note that the map includes a smaller area than the maps of Fig. 4 to facilitate comparisons. Arrows point to SF trend. (b) Directionally filtered magnetic data exhibiting little difference from the unfiltered data. (c) Unfiltered magnetic data overlain by a gray image of the gravity highs along the SF trend. Note that near profile 10 (P10), the magnetic highs appear to be offset to the east from the gravity trend.
Published: 10 January 2002
Fig. 5. ( a ) Unfiltered magnetic data of region near SteamboatFraser (SF) trend identified from gravity data. Note that the map includes a smaller area than the maps of Fig.  4 to facilitate comparisons. Arrows point to SF trend. ( b ) Directionally filtered magnetic data exhibiting little
Image
Isostatic and filtered isostatic gravity maps. (a) Isostatic gravity map of western Canada south of 66°N latitude (see Goodacre et al. 1987 for discussion of the isostatic anomaly calculations; Geological Survey of Canada 1999a). Note the large regional high throughout the Mackenzie Mountains (MMH), the values near zero in the southern Cordillera, and the high in the Rocky Mountains (RMH). Locations of new Lithoprobe seismic profiles (1, 2, and 3) are indicated in the north. (b) Directionally filtered isostatic gravity. The filter includes a low frequency filter and the filter azimuth is 065° relative to grid north (GN), rather than true north. Note the prominent Steamboat–Fraser trend (SF) that crosses the strike of surface structures. GSLsz, Great Slave Lake shear zone; CDF, Cordilleran deformation front; RMT, Rocky Mountain Trench; TT, Tintina Trench. The dashed line to the right of SF in the south is the Fraser River fault. Colour scale is the same as in (a).
Published: 10 January 2002
and the filter azimuth is 065° relative to grid north (GN), rather than true north. Note the prominent SteamboatFraser trend (SF) that crosses the strike of surface structures. GSLsz, Great Slave Lake shear zone; CDF, Cordilleran deformation front; RMT, Rocky Mountain Trench; TT, Tintina Trench. The dashed line
Image
Models of the coincident gravity and magnetic data along profile 9 using a 2 3/4-D algorithm, because at this location the local magnetic anomaly is about 30° oblique to the Steamboat–Fraser trend (Fig. 4b). For modelling, the magnetic field parameters used were the following: average magnitude, 59 000 nT; average inclination, 70°; average declination –22°. (a) Model assuming a substantial component of the mass excess and magnetic material is concentrated in a narrow zone at depth. (b) Model assuming all of the mass excess and magnetic material is concentrated in a wide zone near the surface. Note that in either case, the relatively steep gradients in the magnetic profile require some near-surface magnetic material. k, magnetic susceptibility in SI units.
Published: 10 January 2002
Fig. 8. Models of the coincident gravity and magnetic data along profile 9 using a 2 3/4-D algorithm, because at this location the local magnetic anomaly is about 30° oblique to the SteamboatFraser trend (Fig.  4 b ). For modelling, the magnetic field parameters used were the following: average
Image
Comparison of (a) bandpass filtered isostatic gravity data (14–160 km wavelength), (b) magnetic data (Geological Survey of Canada 1999b), (c) directionally filtered gravity, and (d) outcrops of Tertiary volcanic rocks overlain on the filtered gravity (Wheeler and McFeely 1991). Arrows in (b) and (c) indicate the SF trend and are located in the same positions to facilitate comparisons between the magnetic and filtered gravity maps. Note that the magnetic high may be offset slightly from the gravity high near the southern part of the trend (near southern arrow in b and c; see also Fig. 5). P9 in (b) is the location of profile 9 used for modelling coincident magnetic and gravity profile. All 10 profile locations are shown in (d) with profile 1 (P1) in the north and profile numbers increasing to P10 in the south. The Rocky Mountain Trench (RMT) is dotted where it is primarily extensional (southern RMT) and dashed where it is primarily strike-slip (Tintina Trench and northern RMT). Region between the RMT and Cordilleran deformation front (CDF) is the Foreland Belt, and the dashed line in the south of the maps is the Fraser River fault. SF, Steamboat–Fraser trend; GSLsz, Great Slave Lake shear zone.
Published: 10 January 2002
it is primarily extensional (southern RMT) and dashed where it is primarily strike-slip (Tintina Trench and northern RMT). Region between the RMT and Cordilleran deformation front (CDF) is the Foreland Belt, and the dashed line in the south of the maps is the Fraser River fault. SF, SteamboatFraser trend; GSLsz
Image
Envelope (gray) of 10 profiles across the Steamboat–Fraser (SF) filtered gravity trend. The envelope was calculated by first aligning the profiles on the maximum value of the SF trend and then determining the maximum, minimum, and average values.
Published: 10 January 2002
Fig. 6. Envelope (gray) of 10 profiles across the SteamboatFraser (SF) filtered gravity trend. The envelope was calculated by first aligning the profiles on the maximum value of the SF trend and then determining the maximum, minimum, and average values.
Image
Directionally filtered gravity data (northeast filter) with mapped faults overlain for a portion of the area of northeastern British Columbia. Note the spatial correlation of north-striking faults with the north-striking Steamboat–Fraser (SF) trend. These faults are associated with a deflection of structures that Thompson (1989) interpreted to be associated with a basement ramp. If so, the correlation with the SF potential field trend may be evidence that this trend is related to old (pre-Cordilleran) structures. CDF, Cordilleran Deformation Front; TT–NRMT, Tintina – Northern Rocky Mountain Trench.
Published: 23 September 2005
Fig. 7. Directionally filtered gravity data (northeast filter) with mapped faults overlain for a portion of the area of northeastern British Columbia. Note the spatial correlation of north-striking faults with the north-striking SteamboatFraser (SF) trend. These faults are associated
Journal Article
Published: 23 September 2005
Canadian Journal of Earth Sciences (2005) 42 (6): 1239–1255.
...Fig. 3. Magnetic anomaly map of the same region as shown in Fig.  1 ( Geological Survey of Canada 1999 b ). GBma, Great Bear magmatic arc; SF, SteamboatFraser trend. Other abbreviations as in Figs.  1 and 2 . ...
FIGURES | View All (13)
Journal Article
Published: 13 July 2022
Journal of Sedimentary Research (2022) 92 (7): 635–657.
... by Heath (1977) for modern sediments and Bohacs et al. (2005) for ancient strata. Fig. 10.— Parasequence styles in A) FA1, B) FA2, C) FA3, and D) FA4. Parts A and C are from Steamboat. Parts B and D are from Salt Wash. The coarsening-upward trend of parasequences is indicated by blue...
FIGURES | View All (14)
Journal Article
Journal: AAPG Bulletin
Published: 01 July 2005
AAPG Bulletin (2005) 89 (7): 853–882.
... and soft-sediment deformation. Sediment stacking patterns are the result of deposition by high-density flows compensating for depositional topography. This can be seen on the location called Steamboat Rock, which is an outcrop consisting of massive, tabular sands with complex constructional terminations...
FIGURES | View All (14)
Journal Article
Journal: Economic Geology
Published: 01 August 2007
Economic Geology (2007) 102 (5): 817–839.
..., Silverton, Gladstone, Union, Mascotte, and Amaranth were discovered less than 2 km east of the Martha deposit ( Bell and Fraser, 1912 ; Morgan, 1924 ). However, limited underground development of these veins between 1885 and 1902 produced only 4,376 kg of Au-Ag bullion from 70,491 t of ore, with most...
FIGURES | View All (18)
Journal Article
Published: 08 August 2024
Environmental & Engineering Geoscience (2024) 30 (3): 111–130.
... . Madole, R. F. 1991 , Surficial Geologic Map of the Steamboat Springs 30′ × 60′ Quadrangle, Grand, Jackson, and Routt Counties, Colorado : U.S. Geological Survey Miscellaneous Investigations Series Map I-1825 . Marvin, R. F.; Mehnert, H. H.; and Mountjoy, W. M. 1966...
FIGURES | View All (15)
Journal Article
Journal: Economic Geology
Published: 01 March 2019
Economic Geology (2019) 114 (2): 243–273.
... ( Bell and Fraser, 1912 ). These lenses of less-altered rock are inferred to have a lower permeability that restricted fluid-mineral interaction, element exchange, and alteration by secondary minerals. The hard bars have low-rank clays (e.g., smectite or illite-smectite), compared to clays in surrounding...
FIGURES | View All (20)
Journal Article
Published: 01 June 2016
Clays and Clay Minerals (2016) 64 (3): 245–274.
... in a zone bounded by two NW–SE trending strike-slip faults ( Figure 2 ). It was exposed in four open pits between two fault zones (F1 and F2). The mineral assemblages of the deposits are similar, but their relative abundances differ (details are explained in the following sections). The four subdeposits...
FIGURES | View All (18)
Journal Article
Journal: Economic Geology
Published: 01 July 2001
Economic Geology (2001) 96 (4): 773–796.
... of the Coromandel volcanic zone is controlled by north-northwest- and northeast- to east-northeast–trending block faults that formed in the Jurassic graywacke during the Early Cretaceous ( Skinner, 1986 , 1995 ). The Coromandel volcanic zone is bounded to the west by the Hauraki rift, a major graben filled by up...
FIGURES | View All (18)
Journal Article
Published: 01 October 2022
Clays and Clay Minerals (2022) 70 (5): 753–779.
... important formations in these kaolin deposits occurred along the NE–SW-trending Çan-Etili-Bayramiç fault zone. The Bahadırlı, Duman, and Çaltıkara quarries are well preserved kaolin deposits throughout these fault zones located within the Çan Volcanics. Mineralogical, geochemical, and isotopic analyses were...
FIGURES | View All (9)
Series: GSA Field Guide
Published: 01 January 2010
DOI: 10.1130/2010.0018(03)
EISBN: 9780813756189
.... meeki (photo: Rick Wicker, DMNS). Figure 8. Schematic diagram showing profile of the modern Fraser River; elevations of highest remnants of the Troublesome Formation east of the Fraser River; elevation of base of Troublesome Formation penetrated in a drill hole; and topographic profile of pre...
FIGURES | View All (8)