1-20 OF 1183 RESULTS FOR

Saddle Island Fault

Results shown limited to content with bounding coordinates.
Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Image
Generalized geologic map of the Lake Mead area. Bar and ball indicate downthrown side of normal faults, sawteeth on upper plate of thrust faults; arrows show movement sense along strike-slip faults. Unadorned faults indicate complex oblique slip or unknown movement sense. BRF=Bitter Ridge fault; BSVF=Bitter Spring Valley fault; GBF=Gold Butte fault; GWF=Grand Wash fault; HBF=Hamblin Bay fault; LRF=Lime Ridge fault; LMF=Lakeside Mine segment of the South Virgin–White Hills detachment; LVVSZ=Las Vegas Valley shear zone; SIF=Saddle Island fault; WF=Wheeler Ridge fault. Inset shows location of study area in Nevada.
Published: 01 May 2005
detachment; L V V S Z = Las Vegas Valley shear zone; S I F = Saddle Island fault; W F = Wheeler Ridge fault. Inset shows location of study area in Nevada.
Journal Article
Journal: Geology
Published: 01 June 1985
Geology (1985) 13 (6): 421–424.
...Pierre Choukroune; Eugene I. Smith Abstract On Saddle Island a detachment fault of Tertiary age separates two structurally different plates. In the lower plate, Precambrian amphibolite and gneiss are strongly overprinted by a subhorizontal mylonitic foliation that may have formed during east...
Published: 01 January 1990
DOI: 10.1130/MEM176-p77
... The Saddle Island detachment fault is a major, and possibly the dominant, structural feature in the Lake Mead area, Nevada. Exposures on Saddle Island contain many of the characteristic elements of metamorphic core complexes of the Colorado River trough detachment terrane, including lower-plate...
Series: GSA Field Guide
Published: 01 January 2008
DOI: 10.1130/2008.fld011(01)
EISBN: 9780813756110
... Abstract This field trip will visit the River Mountains volcanic section (12.17 ± 0.02 to 13.45 ± 0.02 Ma) and Wilson Ridge pluton (13.10 ± 0.11 Ma) in southern Nevada and northwestern Arizona. Although this volcanic-plutonic system was disrupted by the Saddle Island detachment fault during...
FIGURES | View All (15)
Image
(A) Map modified from Blakely et al. (2009) showing the tectonic setting of the Puget Lowland and Olympic Peninsula. The yellow arrow shows the regional direction of strain relative to North America (McCaffrey et al., 2007). This strain causes north-south compression that is buttressed by the stable Canadian craton and results in 4.4 ± 0.3 mm/yr of permanent shortening being accommodated across the Puget Lowland region. FCF—Frigid Creek fault; HRF—Hurricane Ridge fault; OF—Olympia fault; OU—Olympia uplift; SB—Seattle Basin; SF—Seattle fault; SMF—Saddle Mountain East and Saddle Mountain West faults; SMDZ—Saddle Mountain deformation zone; SU—Seattle uplift; TB—Tacoma Basin; TF—Tacoma fault. Other regional faults not referred to in this research but shown in Figure 1: CRF—Canyon River fault; DMF—Devils Mountain fault; EB—Everett basin; KA—Kingston arch; LRF—Leech River fault; RMF—Rattlesnake Mountain fault; SCF—Straight Creek fault; SWIF—southern Whidbey Island fault; WRF—White River fault. (B) Geological map modified from Schuster (2005) and Blakely et al. (2009).
Published: 01 August 2012
that is buttressed by the stable Canadian craton and results in 4.4 ± 0.3 mm/yr of permanent shortening being accommodated across the Puget Lowland region. FCF—Frigid Creek fault; HRF—Hurricane Ridge fault; OF—Olympia fault; OU—Olympia uplift; SB—Seattle Basin; SF—Seattle fault; SMF—Saddle Mountain East and Saddle
Journal Article
Journal: Economic Geology
Published: 01 May 1955
Economic Geology (1955) 50 (3): 271–310.
... smaller earthfill saddle dams on tributary drainages; two diversion tunnels; and appurtenant structures.The main dam and most of the saddle embankments are founded on quartz diorite (Upper Jurassic). Metamorphic rocks of the Amador group (Middle-Upper Jurassic) form the foundation at the Mormon Island...
Journal Article
Journal: Geology
Published: 01 January 1991
Geology (1991) 19 (1): 87–90.
..., and stratal tilting reflect kinematically coupled movement along a combined Las Vegas Valley shear-zone-Saddle Island detachment-fault system. Geological Society of America 1991 ...
Image
(A) Kinematic model of the Cascadia forearc (simplified from Wells et al., 1998; Wells and Simpson, 2001). Northward migration of the Oregon Coast Range squeezes western Washington against the North American plate, producing faults and earthquakes in the Puget Lowland. Red lines are faults; black arrows show motions of tectonic blocks. (B) Tectonic setting of the Seattle and Tacoma fault zones and the Saddle Mountain deformation zone in the southern Puget Lowland region (modified from Blakely et al., 2009). The Puget Lowland occupies the area within the orange dashed line. Red and green stipples indicate regions of uplift and sedimentary basins, respectively, as defined by gravity anomalies. Holocene or suspected Holocene faults are shown in black. Faults in the Seattle and Tacoma fault zones and the Saddle Mountain deformation zone are shown in red. Basins and regions of uplift: BB—Bellingham basin; EB—Everett basin; KA—Kingston arch; SB—Seattle basin; SU—Seattle uplift; DB—Dewatto basin; TB—Tacoma basin; OU—Olympia uplift. Faults: BCF—Boulder Creek fault; LRF—Leech River fault; DMF—Devil’s Mountain fault; SWIF—southern Whidbey Island fault; RMF—Rattlesnake Mountain fault; SMF—Saddle Mountain faults; CRF—Canyon River fault; FCF—Frigid Creek fault; WRF—White River fault; OF—Olympia fault. (C) Southern Puget Lowland showing the Seattle fault zone, Tacoma fault zone, Saddle Mountain deformation zone, Olympia fault, and related late Holocene fault scarps (base from Finlayson, 2005). Faults (red lines) are inferred from evidence summarized by Brocher et al. (2004), Johnson et al. (2004b), Karel and Liberty (2008), Liberty and Pratt (2008), Witter et al. (2008), Blakely et al. (2009), Clement et al. (2010), and Tabor et al. (2011). Fault scarps (black lines) are as identified on lidar (light detection and ranging) imagery by many investigators (e.g., Harding and Berghoff, 2000; Haugerud and Harding, 2001; Nelson et al., 2002; Haugerud et al., 2003; Sherrod et al., 2004a; Nelson et al., 2008; Witter et al., 2008; Blakely et al., 2009). Colored symbols mark sites with evidence of surface deformation (from Bucknam et al., 1992; Sherrod, 2001; Sherrod et al., 2004a; Tabor et al., 2011; Arcos, 2012): green (inverted triangles)—coseismic subsidence, purple (triangles)—coseismic uplift, blue (circle)—no movement. Faults marked by the Price Lake scarps include the Saddle Mountain East fault (SME) and Saddle Mountain West fault (SMW).
Published: 01 August 2014
are faults; black arrows show motions of tectonic blocks. (B) Tectonic setting of the Seattle and Tacoma fault zones and the Saddle Mountain deformation zone in the southern Puget Lowland region (modified from Blakely et al., 2009 ). The Puget Lowland occupies the area within the orange dashed line. Red
Image
(A) Topographic map of northwestern Washington and Vancouver Island. Bold lines are faults modified from Washington Division of Geology and Earth Resources (2005). B—Bellingham; E—Everett; S—Seattle; T—Tacoma; O—Olympia; V—Victoria. (B) Isostatic residual gravity anomalies. BB—Bellingham basin; EB—Everett basin; SB—Seattle basin; TB—Tacoma basin; DB—Dewatto basin; DMF—Devils Mountain fault; SPF—Strawberry Point fault; UPF—Utsalady Point fault; SF—Seattle fault; TF—Tacoma fault; SWIF—southern Whidbey Island fault; SMF—Saddle Mountain fault; FCF—Frigid Creek fault; CRF—Canyon River fault; OF—Olympia fault. Dotted line is Hood Canal fault. Blue rectangles indicate areas of Figures 2, 4, and 6.
Published: 01 April 2009
—Bellingham basin; EB—Everett basin; SB—Seattle basin; TB—Tacoma basin; DB—Dewatto basin; DMF—Devils Mountain fault; SPF—Strawberry Point fault; UPF—Utsalady Point fault; SF—Seattle fault; TF—Tacoma fault; SWIF—southern Whidbey Island fault; SMF—Saddle Mountain fault; FCF—Frigid Creek fault; CRF—Canyon River
Image
Tectonic setting and location of the Sadie Creek fault, modified from Duckworth (2019). (a) Plate‐tectonic setting of the Cascadia subduction zone. Plate convergence direction (black arrow) between the North American plate and Juan de Fuca plate is from DeMets et al. (2010). Triangles show Cascade volcanoes. (b) Generalized geologic map of northwestern Washington, United States, and southern Vancouver Island, Canada. Geologic units are simplified from Dragovich et al. (2002). Quaternary active faults in Washington are modified from the U.S. Geological Survey Quaternary Fault and Fold Database (see Data and Resources). Quaternary active faults within Vancouver Island are from the British Columbia Geological Survey (see Data and Resources). CLF, Cowichan Lake fault; CRF, Canyon River fault; DDMFZ, Darrington–Devils Mountain fault zone; HCF, Hood Canal fault; LCBC, Lake Creek–Boundary Creek fault; LRF, Leach River fault; PS, Puget Sound; SCF, Sadie Creek fault; SF, Seattle fault zone; SJF, San Juan fault; SMFZ, Saddle Mountain fault zone; SWIFZ, South Whidbey Island fault zone; TF, Tacoma fault. *Fault kinematics indicated for faults on which motion sense is well constrained. The color version of this figure is available only in the electronic edition.
Published: 27 October 2020
, Lake Creek–Boundary Creek fault; LRF, Leach River fault; PS, Puget Sound; SCF, Sadie Creek fault; SF, Seattle fault zone; SJF, San Juan fault; SMFZ, Saddle Mountain fault zone; SWIFZ, South Whidbey Island fault zone; TF, Tacoma fault. *Fault kinematics indicated for faults on which motion sense is well
Image
Map of the Puget Lowland. Paleoseismic sites are shown as orange dots. Ruptures studied here are shown in pink and blue; pink represents the maximum possible length of each earthquake, and blue represents the minimum. Additional faults in black are from the U.S. Geological Survey (USGS) Quaternary fault and fold database (see Data and Resources). Shaded areas indicate urban development. Inset shows study area location. BCF, Bellingham Coastal faults; DDMF, Darrington–Devil’s Mountain fault; FCF, Frigid Creek fault; KF, Kendall fault; LCBCF, Lake Creek–Boundary Creek fault; OF, Olympia fault; SFZ, Seattle fault zone; SMF, Saddle Mountain faults; SWIF, South Whidbey Island fault zone; TF, Tacoma Fault; UPF, Utsalady Point fault.
Published: 15 December 2020
fault; SFZ, Seattle fault zone; SMF, Saddle Mountain faults; SWIF, South Whidbey Island fault zone; TF, Tacoma Fault; UPF, Utsalady Point fault.
Series: SEPM Gulf Coast Section Publications
Published: 01 December 1993
DOI: 10.5724/gcs.95.16.0223
EISBN: 978-1-944966-30-0
... structural relief that effectively inhibits down-slope gravity gliding. Deep elliptical depressions in the weld are separated by saddles that underlie passive diapirs; subhorizontal salt sheets are rare and small. The few major normal growth faults are arcuate, curving around the updip and lateral margins...
FIGURES | View All (10)
Journal Article
Published: 01 May 2003
Russ. Geol. Geophys. (2003) 44 (5): 391–406.
... and North Baikal, separated by a diagonal link of Olkhon island — submerged Akademichesky Ridge — Ushkan’i isles. The South Baikal basin is in turn bisected by the Selenga saddle, the oldest and largest deposition center filled with about 10,000 m thick sediments strongly deformed in Pliocene-Quaternary...
FIGURES | View All (8)
Journal Article
Published: 01 May 1998
Canadian Journal of Earth Sciences (1998) 35 (5): 495–503.
... shows that formation of the Boulder basin was associated with development of topographic relief that was probably generated by movement along the Saddle Island low-angle normal fault. Stratal tilting associated with extension occurred both prior to and after 11.5 Ma. Les âges 40 Ar/ 39 Ar...
Image
Map of Lake Mead area showing modification of the Duebendorfer et al. (1998) reconstruction. Steps in reconstruction are as follows: (1) Restoration of 20 km of left-slip movement along the Hamblin Bay fault and about 5 km north-south shortening places Frenchman Mountain near the present Gale Hills. (2) The River Mountains stratovolcano complex (part of the Frenchman Mountain structural block) is moved a minimum of 7 km east along a combined Las Vegas Valley shear zone–Saddle Island detachment-transfer fault system. (3) About 15 km of extension was accommodated north of Lake Mead by a system of strike-slip and normal faults. (4) Frenchman Mountain is restored to a hanging-wall position over the Gold Butte block. Abbreviations are as in figure 1.
Published: 01 May 2005
the present Gale Hills. (2) The River Mountains stratovolcano complex (part of the Frenchman Mountain structural block) is moved a minimum of 7 km east along a combined Las Vegas Valley shear zone–Saddle Island detachment-transfer fault system. (3) About 15 km of extension was accommodated north of Lake Mead
Image
Tectonic framework of Washington State. The solid black lines are Quaternary faults from the U.S. Geological Survey Quaternary Fault Database (see Data and Resources). The fault labels are DM, Devils Mt.; SW, Southern Whidbey Island; SF, Seattle; TF, Tacoma; OF, Olympia; DF, Doty; SC, Straight Creek; FH, Frenchman Hills; SM, Saddle Mountains; UR, Umtanum Ridge; AR, Ahtanum Ridge; RM, Rattlesnake Mountain; TR, Toppenish Ridge; and HH, Horse Heaven Hills. The dashed black lines are interpreted faults from Blakely et al. (2011) labeled as ML, Mount Lindsay; GR, Green River; WR–NR, White River–Naches River; and WRM, western Rattlesnake Mountain. The yellow circles are upper‐plate earthquake locations and magnitudes (Katie Keranen; written communication, 2009). The Wooded Island earthquake swarm is labeled WI. The red arrows show long‐term crustal block motions relative to stable North America, as determined from an inversion of GPS measurements (fig. 9d of McCaffrey et al., 2007). Cities are indicated by white boxes and labeled E, Everett; S, Seattle; T, Tacoma; R, Richland; Y, Yakima; EL, Ellensburg; and W, Wenatchee. The dashed blue box is the area of Figures 3 and 5.
Published: 01 August 2012
Figure 1. Tectonic framework of Washington State. The solid black lines are Quaternary faults from the U.S. Geological Survey Quaternary Fault Database (see Data and Resources ). The fault labels are DM, Devils Mt.; SW, Southern Whidbey Island; SF, Seattle; TF, Tacoma; OF, Olympia; DF, Doty; SC
Image
Quaternary faults and fold axes on shaded relief map of eastern Washington and northern Oregon, for the area studied in Blakely et al. (2011). Lines show Quaternary thrust (black), normal or concealed dip slip (red), strike‐slip (purple), and inferred (dotted) faults and anticline axes (orange) from U.S. Geological Survey Quaternary fault database (U.S. Geological Survey, 2006): FH, Frenchman Hills; SM, Saddle Mountains; UR, Umtanum Ridge; AR, Ahtanum Ridge; RR, Rattlesnake Mountain; MR, Manstas Ridge; YR, Yakima Ridge; TR, Toppenish Ridge; HHH, Horse Heaven Hills; CH, Columbia Hills; WGF, Wallula Gap. The Hanford Nuclear Reservation (labeled) is bounded on the east and north by the Columbia River and was the site of the 2009 Wooded Island swarm (yellow star). Cities indicated by black dots: Y, Yakima; E, Ellensburg; R, Richland. Locations of seismic stations within the study area (dashed box) operated during the study period are shown by black triangles.
Published: 01 February 2012
axes (orange) from U.S. Geological Survey Quaternary fault database ( U.S. Geological Survey, 2006 ): FH, Frenchman Hills; SM, Saddle Mountains; UR, Umtanum Ridge; AR, Ahtanum Ridge; RR, Rattlesnake Mountain; MR, Manstas Ridge; YR, Yakima Ridge; TR, Toppenish Ridge; HHH, Horse Heaven Hills; CH
Image
Schematic of alternative permanent forearc deformation models and map of late Quaternary–Active fault traces in northern Cascadia. (a,b) Black arrows show forearc motion with respect to stable NA, and red and blue arrows show counterclockwise and clockwise rotation, respectively, of the northern and southern Cascadia forearc. Thin black lines are the approximate surface traces of late Quaternary faults shown in (c). (a) “Backstop” model: Northward migration of the Oregon block is accommodated by north–south shortening in western Washington State and southern Vancouver Island due to collision with the Canadian Coast Mountains acting as a rigid buttress (hatched region), which would induce thrust faulting on the Leech River fault (LRF). (b) “Orocline” model: Northward migration of the Oregon block is accommodated by oroclinal bending of the Cascadia forearc, which would induce right‐lateral slip on the LRF as a result of flexural slip on the northern limb of the orocline (see inset). Contemporaneous left‐lateral slip on faults south of the Olympic Mountains, as a result of flexural slip on the southern limb of the orocline, would permit westward escape of the Olympic Peninsula. (c) Late Quaternary‐active fault traces in the northern Cascadia forearc from the U.S. Geological Survey (USGS) Quaternary fold, and fault database for the United States. Selected faults show slip sense: Canyon River (CR) and Saddle Mountain (SM) faults (Wilson et al., 1979; Walsh et al., 1997; Walsh and Logan, 2007; Witter et al., 2008; Blakely et al., 2009; Barnett et al., 2015; Bennett et al., 2017), Seattle fault zone (SFZ) (Johnson et al., 1994, 1999; Blakely et al., 2002; Nelson et al., 2003), Tacoma fault zone (TF) (Sherrod et al., 2004), North Olympic (NO) fault zone (Nelson et al., 2017; Schermer et al., 2020), southern Whidbey Island fault zone (SWIF) (Johnson et al., 1996; Sherrod et al., 2008), Boulder Creek fault (BC) (Sherrod et al., 2013), Devils Mountain fault (DM) (Johnson et al., 2001; Personius et al., 2014; Barrie and Greene, 2018). The LRF is an along‐strike continuation of the Devils Mountain fault and southern Whidbey Island fault zone. The color version of this figure is available only in the electronic edition.
Published: 26 January 2021
, of the northern and southern Cascadia forearc. Thin black lines are the approximate surface traces of late Quaternary faults shown in (c). (a) “Backstop” model: Northward migration of the Oregon block is accommodated by north–south shortening in western Washington State and southern Vancouver Island due
Image
(a) Kinematic model of the Cascadia fore‐arc, simplified from Wells et al. (1998) and Wells and Simpson (2001). Northward migration of the Oregon Coast Range squeezes western Washington against the North American plate, producing faults and earthquakes in northwestern Washington. Arrows show motions (numbers are velocity in mm/yr) with respect to stable North America from Global Positioning System. (b) Tectonic setting of the Lake Creek–Boundary Creek fault on the north flank of the Olympic Mountains (modified from Blakely et al., 2009). Dark stipple indicates regions of uplift, and light stipple indicates sedimentary basins in the Puget Lowland region, respectively, as defined by gravity anomalies. Holocene or suspected Holocene faults are solid lines. Basins and regions of uplift (from north to south): BB, Bellingham basin; EB, Everett basin; KA, Kingston arch; SB, Seattle basin; SU, Seattle uplift; TB, Tacoma basin; OU, Olympia uplift. BCF, Boulder Creek fault; LRF, Leech River fault; DDMF, Darrington–Devils Mountain fault; CF, Calawah fault; SCF, Straight Creek fault; SWIF, southern Whidbey Island fault; SF, Seattle fault; RMF, Rattlesnake Mountain fault; SMF, Saddle Mountain faults; CRF, Canyon River fault; FCF, Frigid Creek fault; TF, Tacoma fault; WRF, White River fault; OS, Olympia structure. (c) Contrasting models of permanent deformation of the Olympic Mountains: 1. Accretion‐driven deformation of the accretionary Olympic Mountains block (OB) and northwestern Washington; wide arrow shows direction of shortening; smaller arrows show accretion‐related strike‐slip faulting. 2. Westward escape of the fault‐bounded OB driven by the northward migrating fore‐arc (wide arrow) and resulting north–south compression of western Washington.The color version of this figure is available only in the electronic edition.
Published: 25 September 2017
, Seattle basin; SU, Seattle uplift; TB, Tacoma basin; OU, Olympia uplift. BCF, Boulder Creek fault; LRF, Leech River fault; DDMF, Darrington–Devils Mountain fault; CF, Calawah fault; SCF, Straight Creek fault; SWIF, southern Whidbey Island fault; SF, Seattle fault; RMF, Rattlesnake Mountain fault; SMF
Image
A: Tectonic setting of concave-outboard Cascadia subduction zone, showing Juan de Fuca–North America plate motion (thick black arrows, MORVEL model; DeMets et al., 2010) and Global Navigation Satellite System (GNSS) velocity vectors (thin arrows; error ellipses [0.43 mm/yr mean standard error] omitted for clarity) relative to stable North America (NA) (UNAVCO Plate Boundary Observatory database, https://www.unavco.org/data/gps-gnss/data-access-methods/dai2/app/dai2.html; McCaffrey et al., 2013). Megathrust interseismic locking pattern is from Wang et al. (2003), where locked zone is dark gray and locking decreases downdip through effective transition zone (lighter gray); B: Generalized geologic setting surrounding Olympic Mountains (OM), northwestern Washington State, USA, showing geologically defined axial trace of orocline (ATO), paleomagnetic declinations (Beck and Engebretson, 1982; Prothero et al., 2008), average orientations of foliations within 23 structural domains (see the Data Repository [see footnote 1] for details), and Quaternary-active crustal faults with modern fault kinematics shown by red arrow pairs (U.S. Geological Survey Quaternary Fault and Fold database [http://earthquake.usgs.gov/hazards/qfaults] unless otherwise noted): 1—Leech River fault (Morell et al., 2017; Li et al., 2018); 2—Darrington–Devils Mountain fault zone, 3—Utsalady Point fault; 4—Southern Whidbey Island fault zone; 5—Lake Creek-Boundary Creek fault (Nelson et al., 2017); 6—Seattle fault; 7—Tacoma fault; 8—Saddle Mountain fault; 9—Canyon River fault. Eoc.—Eocene; Mio.—Miocene.
Published: 04 January 2019
database [ http://earthquake.usgs.gov/hazards/qfaults ] unless otherwise noted): 1—Leech River fault ( Morell et al., 2017 ; Li et al., 2018 ); 2—Darrington–Devils Mountain fault zone, 3—Utsalady Point fault; 4—Southern Whidbey Island fault zone; 5—Lake Creek-Boundary Creek fault ( Nelson et al., 2017