1-20 OF 144 RESULTS FOR

Canadian Malartic Deposit

Results shown limited to content with bounding coordinates.
Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Article
Journal: Economic Geology
Published: 01 May 2014
Economic Geology (2014) 109 (3): 713–735.
...Kayla M. Helt; Anthony E. Williams-Jones; James R. Clark; Boswell A. Wing; Robert P. Wares Abstract With a current resource of 13.4 Moz Au, plus past production of 5.1 Moz Au, the Canadian Malartic deposit represents the first bulk tonnage (measured and indicated resources of 372.9 Mt at 1.02 g/t...
FIGURES
First thumbnail for: Constraints on the Genesis of the Archean Oxidized...
Second thumbnail for: Constraints on the Genesis of the Archean Oxidized...
Third thumbnail for: Constraints on the Genesis of the Archean Oxidized...
Published: 01 January 2017
DOI: 10.5382/Rev.19.09
EISBN: 9781629491172
... Abstract The Canadian Malartic low-grade bulk tonnage gold mine (total production and reserves of 303.3 t or 10.7 Moz at 0.97 g/t) is located in the Archean Abitibi greenstone belt, immediately south of the crustal-scale Larder Lake-Cadillac fault zone. The deposit is predominantly hosted...
Journal Article
Journal: Economic Geology
Published: 01 September 2019
Economic Geology (2019) 114 (6): 1057–1094.
...Stéphane De Souza; Benoît Dubé; Patrick Mercier-Langevin; Vicki McNicoll; Céline Dupuis; Ingrid Kjarsgaard Abstract The Canadian Malartic stockwork-disseminated gold deposit is an Archean world-class deposit located in the southern Abitibi greenstone belt. It contains over 332.8 tonnes (t; 10.7 Moz...
FIGURES
First thumbnail for: Hydrothermal Alteration Mineralogy and Geochemistr...
Second thumbnail for: Hydrothermal Alteration Mineralogy and Geochemistr...
Third thumbnail for: Hydrothermal Alteration Mineralogy and Geochemistr...
Journal Article
Journal: Geophysics
Published: 11 February 2019
Geophysics (2019) 84 (2): B135–B151.
... responses were measured on rock samples from the Canadian Malartic gold deposit. Field SIP responses were also measured at the outcrop scale, along a profile that intersects a well-studied mineralized zone. The mineralogy and the texture of sedimentary rocks from this deposit were quantitatively determined...
FIGURES
First thumbnail for: Mineralogical and textural controls on spectral in...
Second thumbnail for: Mineralogical and textural controls on spectral in...
Third thumbnail for: Mineralogical and textural controls on spectral in...
Journal Article
Journal: Economic Geology
Published: 01 November 2014
Economic Geology (2014) 109 (7): 2069–2071.
...-related Canadian Malartic gold deposit, Quebec, Canada” ( Helt et al., 2014 ), we describe the mineralogy and geochemistry (including whole-rock chemistry, fluid inclusion leachates, S-O-H isotopes, geothermometry/barometry, and phase equilibria) of alteration and mineralization associated...
FIGURES
First thumbnail for: CONSTRAINTS ON THE GENESIS OF THE ARCHEAN OXIDIZED...
Journal Article
Journal: Economic Geology
Published: 01 November 2014
Economic Geology (2014) 109 (7): 2067–2068.
...Georges Beaudoin; Thomas Raskevicius † Corresponding author: e-mail, [email protected] © 2014 Society of Economic Geologists. 2014 Sir: In their paper, entitled “Constraints on the Genesis of the Archean Oxidized, Intrusion-Related Canadian Malartic Gold Deposit...
FIGURES
First thumbnail for: CONSTRAINTS ON THE GENESIS OF THE ARCHEAN OXIDIZED...
Second thumbnail for: CONSTRAINTS ON THE GENESIS OF THE ARCHEAN OXIDIZED...
Image
(a) 3-D geological model of the Canadian Malartic deposit. The red lines are the outlines of the Malartic pit (adapted from CMIC-Footprints 2018). (b) Schematic cross-sections interpreted from the geology map along the two north–south Sections A and B (adapted from Perrouty et al. 2017). [Colour online.]
Published: 20 August 2020
Fig. 2. ( a ) 3-D geological model of the Canadian Malartic deposit. The red lines are the outlines of the Malartic pit (adapted from CMIC-Footprints 2018 ). ( b ) Schematic cross-sections interpreted from the geology map along the two north–south Sections A and B (adapted from Perrouty et al
Image
(A) Geologic map of the Canadian Malartic deposit area. The dashed black contours correspond to the outline of the surface excavations during most of the mapping in 2012. The stippled pink lines represent the projection to surface of the quartz monzodiorite porphyry at 100, 0, and –50 m relative to sea level. Locations of sections shown in Figure 4 are illustrated: A-A’, B-B’, and C-C’. The dotted black lines outline the distribution of the northern and southern structural domains. (B) Surface distribution of gold. Shaded colors correspond to an interpolation of blast hole and reverse circulation drilling assay data (74,321 assays). Red mineralized zones represent a compilation of exploration reverse circulation and diamond drill assays. Black and white squares indicate the position of mine shafts: C = Canadian Malartic, E = East Malartic, FI = F zone intrusion, GI = Gouldie zone intrusion, S = Sladen-Barnat, SI = Sladen zone intrusion.
Published: 01 September 2019
Fig. 2. (A) Geologic map of the Canadian Malartic deposit area. The dashed black contours correspond to the outline of the surface excavations during most of the mapping in 2012. The stippled pink lines represent the projection to surface of the quartz monzodiorite porphyry at 100, 0, and –50 m
Image
Geologic sections across the Canadian Malartic deposit. (A) Gilbert, A, and Sladen zones. (B) Sladen zone. (C) Composite section across the Sladen and Barnat zones. See Figure 2A for the location of sections.
Published: 01 September 2019
Fig. 4. Geologic sections across the Canadian Malartic deposit. (A) Gilbert, A, and Sladen zones. (B) Sladen zone. (C) Composite section across the Sladen and Barnat zones. See Figure 2A for the location of sections.
Image
Geologic map of the Canadian Malartic deposit showing near-surface mineralized zones with inset outlining the main Canadian Malartic orebody in the Pontiac Group, and the South Barnat orebody along the southern margin of the Malartic tectonic zone. The cut off grade is 0.3 g/t Au. Modified from Robert (1989; 2001) and data provided by Osisko Mining Corp.
Published: 01 May 2014
Fig. 4 Geologic map of the Canadian Malartic deposit showing near-surface mineralized zones with inset outlining the main Canadian Malartic orebody in the Pontiac Group, and the South Barnat orebody along the southern margin of the Malartic tectonic zone. The cut off grade is 0.3 g/t Au. Modified
Series: Special Publications of the Society of Economic Geologists
Published: 01 January 2020
DOI: 10.5382/SP.23.02
EISBN: 9781629496429
... Abstract The Malartic gold camp is located in the southern part of the Archean Superior Province and straddles the Larder Lake-Cadillac fault zone that is between the Abitibi and Pontiac subprovinces. It comprises the world-class Canadian Malartic deposit (25.91 Moz, including past production...
Journal Article
Published: 01 September 2022
Canadian Journal of Earth Sciences (2022) 59 (9): 540–565.
.... The veins are similar in structural chronology, fluid isotopic composition (calculated δ D H 2 O value between –9.5‰ and –3.4‰ and δ 18 O H 2 O values of 12‰), and isotopic re-equilibration temperatures (469 and 498 °C, quartz–biotite oxygen thermometer) to the veins at the nearby Canadian Malartic deposit...
FIGURES
First thumbnail for: Structural geology of the Cadillac Group along the...
Second thumbnail for: Structural geology of the Cadillac Group along the...
Third thumbnail for: Structural geology of the Cadillac Group along the...
Image
Conceptual model for the timing of gold mineralization at the Canadian Malartic deposit. (A) Schematic tectonic setting (map view) of the southern Abitibi during D1, inspired from Daigneault et al. (2002). (B, C) schematic sequential sections illustrating the evolution of the Canadian Malartic deposit during (post-Timiskaming) D2 deformation; grt = interpreted position of the garnet isograd. The main phase of hydrothermal alteration and gold mineralization is associated with the formation of brittle to brittle-ductile faults, including the Sladen fault, during late D2 deformation. Abbreviations: cb-felds = carbonate-feldspar, hem-cc = hematite-calcite, k-mica-cc = K-mica-calcite, LLCfz = Larder Lake-Cadillac fault zone.
Published: 01 September 2019
Fig. 18. Conceptual model for the timing of gold mineralization at the Canadian Malartic deposit. (A) Schematic tectonic setting (map view) of the southern Abitibi during D 1 , inspired from Daigneault et al. (2002) . (B, C) schematic sequential sections illustrating the evolution
Image
Geologic map of the Superior Province and the location of the Pontiac Subprovince and the Malartic District relative to the Abitibi Subprovince, Canada. Modified after Robert et al. (2005) and compiled from Robert and Poulsen (1997) and Ayer et al. (2002). The red circle indicates the location of the Canadian Malartic deposit. The two major crustal breaks that control the regional distribution of the gold deposits are the CLLDZ and the Porcupine Destor Deformation Zone (PDDZ).
Published: 11 February 2019
the location of the Canadian Malartic deposit. The two major crustal breaks that control the regional distribution of the gold deposits are the CLLDZ and the Porcupine Destor Deformation Zone (PDDZ).
Image
Fig. 1.
Published: 18 April 2019
Fig. 1. Geological map of the Pontiac Subprovince, south of the Canadian Malartic deposit (modified from Perrouty et al. 2017 ). Historic gold mines, prospects, and occurrences are located. The red polygon represents the open-pit mine (as designed in 2013). CLLDZ, Cadillac Larder Lake
Image
Bar charts showing relative mass changes for selected major oxides and elements in graywacke from the Canadian Malartic deposit. The bars from left to right represent (1) weakly altered; (2) weakly to moderately altered; (3) moderately to strongly altered (dominantly potassic); and (4) strongly altered (dominantly silicic) lithotypes.
Published: 01 May 2014
Fig. 9 Bar charts showing relative mass changes for selected major oxides and elements in graywacke from the Canadian Malartic deposit. The bars from left to right represent (1) weakly altered; (2) weakly to moderately altered; (3) moderately to strongly altered (dominantly potassic); and (4
Image
Microprobe data for sedimentary rocks and quartz monzodiorite of the Canadian Malartic deposit. (A) Si/Altotal and F versus molar Mg/(Mg + Fe) ratio for biotite. (B) Mg/Altotal and Si versus Altotal for white mica. (C) Fe/(Fe + Mg) versus Si classification of chlorite (Hey, 1954). Abbreviation: apfu = atoms per formula unit.
Published: 01 September 2019
Fig. 12. Microprobe data for sedimentary rocks and quartz monzodiorite of the Canadian Malartic deposit. (A) Si/Al total and F versus molar Mg/(Mg + Fe) ratio for biotite. (B) Mg/Al total and Si versus Al total for white mica. (C) Fe/(Fe + Mg) versus Si classification of chlorite ( Hey, 1954
Image
Comparison of (a) gold concentration in the Pontiac group, (b) bedding dip variance calculated from field structural measurements, (c) topography (1 arc second resolution recovered from the Geosoft Public DAP Server), (d) average cover thickness produced by gridding (200 m cell size) the measurements of overburden in the field located at the black dots. The overburden data are a compilation of 3731 drillhole logs from the Canadian Malartic, 555 till samples from MERNQ, 27 till samples from Taves (2016), and 345 outcrop sample data from Perrouty et al. (2017), (e) airborne apparent resistivity and (f) Quaternary geology coverage of the Canadian Malartic district (modified after Veillette, 2004) with the contours from the airborne resistivity superimposed. The most conductive contour follows the tailing areas and other mining-related ground disturbance near the pit. Outside of those areas, the most conductive regions correspond to the surface coverage of clay-rich deepwater sediments and mud. The mid to high resistivities are well-correlated with the surficial till and sand coverage. The sporadic outcrops display very high resistivities. The corridor marked by the dashed red lines outlines the correspondence between these various data around the Canadian Malartic deposit. See the text for discussion.
Published: 13 February 2019
outlines the correspondence between these various data around the Canadian Malartic deposit. See the text for discussion.
Image
Deposit scale map of the Canadian Malartic property (modified from Perrouty et al., 2017). The locations of seven sedimentary rock samples representative of the various hydrothermal alteration types are shown by the black circles and corresponding sample numbers. Au mineralization is hosted mainly in sedimentary rocks and partly in felsic-intermediate intrusive rocks. Coordinates of the map corners are given in NAD83 UTM zone 17 N.
Published: 11 February 2019
Figure 3. Deposit scale map of the Canadian Malartic property (modified from Perrouty et al., 2017 ). The locations of seven sedimentary rock samples representative of the various hydrothermal alteration types are shown by the black circles and corresponding sample numbers. Au mineralization
Journal Article
Published: 16 May 2022
Canadian Journal of Earth Sciences (2022) 59 (8): 489–503.
..., frequency-domain electromagnetic, and radiometric data. Unlike the western part of the area, many studies have been done in the eastern part where the world-class Canadian Malartic gold deposit is located. The eastern part has abundant field observations and well-documented geology that are used as training...
FIGURES
First thumbnail for: A Random Forest approach to predict geology from g...
Second thumbnail for: A Random Forest approach to predict geology from g...
Third thumbnail for: A Random Forest approach to predict geology from g...