Abstract The Sierra de Juárez Complex (SJC) of southern Mexico contains an extensive geological record from Precambrian to Cenozoic, involving Rodinia, NW Gondwana, western equatorial Pangaea, and eastern peninsular Mexico. It is thus critical for palinspastic reconstructions and lithotectonic correlations, mainly between the Mexican and NW South America terranes. In this contribution, we investigate the tectonic evolution of the northern SJC from Silurian to the Lower Cretaceous on the basis of fieldwork, petrography, and zircon U–Pb geochronology by laser ablation–inductively coupled plasma mass spectrometry. Our results allow us to constrain five main geological events: (1) Middle Paleozoic sedimentation along NW Gondwana during transtensional tectonics; (2) volcanosedimentary activity between 292 and 281 Ma in NW Gondwana during Rheic Ocean closure; (3) early-middle Permian metamorphism related to flat-slab subduction postdating Pangaea assembly; (4) Lower–Middle Jurassic anatexis and magmatism coeval with regional shearing at c. 175 Ma influenced by transtensional tectonics along eastern peninsular Mexico during Pangaea tenure; and (5) intermediate to acid magmatism between c. 136 and 129 Ma, correlated with the Zongolica continental arc in southern Mexico, followed by deep-crustal shearing related to either the formation of the extensional Chivillas basin or the Upper Cretaceous–Cenozoic contractional episode documented in the Cuicateco Terrane.

ABSTRACT We generated low-temperature thermochronological data on crystalline rocks from the Chiapas Massif in southern Mexico to constrain the complex relationship among tectonics, exhumation, and sedimentation in the region. Our data show that the first recorded cooling event occurred at ca. 40–25 Ma due to denudation of the sedimentary cover of the Chiapas Massif at slow rates of ~0.1 km/m.y. This was followed by a period of tectonic quiescence from ca. 25 to 14 Ma. Between ca. 14 and 7 Ma, cooling implying exhumation of the massif at rates of up to ~0.7 km/m.y. was renewed, and this was associated with, and possibly responsible for, the Miocene “Chiapanecan” deformational event observed in the Chiapas fold-and-thrust belt to the northeast of the massif. This younger uplift was also accompanied by the onset of arc-related magmatism beneath the massif, between ca. 13 and 9 Ma, along the Tonalá shear zone at the Pacific coast. Since ca. 7 Ma, additional but slower cooling and exhumation are indicated along the length of the Chiapas Massif, and arc magmatism has jumped north by ~125 km from the Tonalá shear zone into the Chiapas fold-and-thrust belt. Concurrently, subsidence and sedimentation have persisted along the offshore Tehuantepec Shelf to the south, suggesting that the Tonalá shear zone has been recently active (despite no magnitude 4 or larger earthquakes), with up-to-the-north vertical displacement. We interpret the exhumation at ca. 40–25 Ma to pertain to displacement of the Chortis block along the paleo–Motagua fault zone, either as a northward propagation of a basement thrust beneath the massif within a regional transpressional setting, or as a deep, ductile crustal thickening and attendant isostatic uplift of the southern flank of the massif during the transpressional passage of the Chortis block. The ensuing quiescence (25–14 Ma) coincided, we believe, with the passage of the “western tail” of Chortis, which is internally deformed and perhaps transferred compressive stress less effectively than had the central, continental core of the Chortis block earlier. Renewed uplift and exhumation of the region began by ca. 14–10 Ma. An onset at ca. 10 Ma is probably the best estimate for the beginning of exhumation of the northwestern and central portions of the Chiapas Massif, whereas the present-day southeastern tip of the massif (potentially an allochthonous sliver belonging to the Chortis block) started to exhume earlier, at ca. 14 Ma. By ca. 13 Ma, arc magmatism had moved into the western Tehuantepec area, marking the onset of subduction of the Cocos plate beneath the Chiapas Massif. Hence, we interpret the main period of uplift of the Chiapas Massif and primary shortening of the Chiapas fold-and-thrust belt (ca. 14–7 Ma) as being driven by the establishment of Cocos subduction beneath the area.

ABSTRACT The Oaxacan Complex is the largest outcrop of Grenville-age rocks in Mexico, constituting the main crustal fragment in the backbone of Oaxaquia. It is mainly composed of scarce metasediments, intruded by arc, alkalic, and tholeiitic magmas (ca. 1.3 to ca. 1.01 Ga) and later affected (ca. 0.99 Ga) by granulite-facies metamorphism. A detailed study, combining U-Pb geochronology by laser ablation–inductively coupled plasma–mass spectrometry, with in situ Hf isotopes in zircon grains, allowed comparison of the age and isotopic patterns of the Oaxacan Complex granulite rocks with those from other similar outcrops in Mexico (Huiznopala and Novillo Gneisses, Guichicovi Complex) and with the neighboring orogens such as the Grenville Province of the eastern United States and Canada, the Sveconorwegian orogen of SW Baltica, and some of the localities in which Mesoproterozoic rocks border the Amazonian craton of South America (Colombia, Peru, Brazil). Detrital zircon ages show that most metasedimentary rocks are younger than 1.4 Ga (only three samples contained zircon grains between 1.6 and 1.4 Ga), whereas U-Pb dating of igneous rocks (1245–1161 Ma) confirmed previous findings. Hf isotopes of dated zircon grains show that few crystals have negative ε Hf( t ) values, indicating a recycling component from an older crust, but most of them are moderately primitive, with ε Hf( t ) values of up to +12, and linear arrays parallel to the 176 Lu/ 177 Hf average crustal evolution model. Those Hf values are indicative of partial assimilation of an older crustal component, with Hf model ages of ca. 1.65–1.50 Ga. Comparison of these data helps to constrain possible Mesoproterozoic conjugate margins of Oaxaquia and propose a paleogeographic model in which Oaxaquia acted as the leading edge of Amazonia, together with the Colombian terranes, and received sedimentary input from different sources such as the southern Sveconorwegian orogen, the U.S.–Canada eastern Grenville Province, and some of the Mesoproterozoic belts bordering the Amazon craton.

ABSTRACT Sandstone petrography, detrital zircon geochronology, and sedimentology of Lower Cretaceous to Paleocene strata in the Cuicateco terrane of southern Mexico indicate an evolution from extensional basin formation to foreland basin development. The Early Cretaceous extensional basin is characterized by deposition of deep-marine fans and channels, which were mainly sourced from Mesoproterozoic and Permian crystalline rocks of the western shoulder of the rift basin. Some submarine fans, especially in the northern Cuicateco terrane, record an additional source in the Early Cretaceous (ca. 130 Ma) continental arc. The fans were fed by fluvial systems in updip parts of the extensional basin system. The transition from middle Cretaceous tectonic quiescence to Late Cretaceous shortening is recorded by the Turonian–Coniacian Tecamalucan Formation. The Tecamalucan Formation is interpreted as pre-orogenic deposits that represent submarine-fan deposits sourced from Aptian–Albian carbonate platform and pre-Mesozoic basement. The foreland basin in the Cuicateco terrane was established by the Maastrichtian, when foredeep strata of the Méndez Formation were deposited in the Cuicateco terrane, Veracruz basin, and across the western Gulf of Mexico, from Tampico to Tabasco. In the Zongolica region, these strata were derived from a contemporaneous volcanic arc (100–65 Ma) located to the west of the basin, the accreted Guerrero terrane (145–120 Ma), and the fold belt itself. By the Paleocene, sediments were transported to the foreland basin by drainages sourced in southwestern Mexico, such as the Late Cretaceous magmatic rocks of the Sierra Madre del Sur, and the Chortis block.

ABSTRACT The Oaxacan Complex represents the largest outcrop of Grenvillian basement in Mexico. Broadly, it consists of pelitic gneisses, quartzofeldspathic gneisses, metasomatic calc-silicates, orthoamphibolites, and marbles, all intruded by anorthosites, orthocharnockites, and orthogneisses. The entire assemblage underwent granulite-facies metamorphism ca. 1 Ga. We studied for the first time the ultramafic rocks of the Oaxacan Complex, represented by six different samples, all corresponding to ultramafic granulites. Their igneous equivalents are orthopyroxenites, websterites, and clinopyroxenites, and they occur as metric-scale lenses or centimetric layers in paragneisses, or in mingling textures with anatectic marbles. We studied their petrography, geochemistry, geochronology, and geothermobarometry to elucidate their genesis and tectonic implications. Our samples have enriched mid-ocean-ridge basalt and oceanic-island-arc affinities, both tholeiitic and calc-alkaline. Rare earth element patterns normalized to chondritic uniform reservoir from whole rock or single minerals define two or three main groups related to their origin and metamorphic history. Based on their protoliths, these rocks can be divided into: (1) ortho-derived pyroxenites (pre–Grenvillian orogeny), the origin of which was a magmatic cumulate or mafic melt or a mantle rock that had undergone metasomatism; and (2) para-derived pyroxenites (syn- or post-Grenvillian orogeny), the origin of which was a calc-silicate rock undergoing pervasive anatectic and metasomatic processes. The geothermobarometry revealed different stages in the syn- and post-Grenvillian granulitic metamorphic history of the Oaxacan Complex. The high temperature calculated from one sample (~945 °C), in the ultrahigh-temperature metamorphic field, is probably closer to the granulitic metamorphism peak than those obtained in previous studies, although a relict igneous temperature cannot be ruled out with the present data.

ABSTRACT We present a summary of information on seismically active faulting in Chiapas, Mexico, related to North America–Caribbean plate-boundary zone deformation. We collected data from published works, and we also present new data collected from reporting agencies. Several active structures were identified as part of the deformation of the plate-boundary zone in the states of Chiapas and Veracruz, including 18 large (up to 175-km-long) strike-slip faults belonging to three tectonic realms: the Tonalá realm, the Depresión Central, and the strike-slip fault province. Available fault-plane solutions indicate left-lateral, strike-slip displacement along these faults. The reverse-fault province is also found to be part of the plate-boundary zone and seismically active, with thrust-faulting fault-plane solutions. Deformation extends to the northwest, along the Veracruz coastal plains region, which is also seismically active.

ABSTRACT A combined petrographic and chemical study of ejecta particles from the Cretaceous-Paleogene boundary sequence of El Guayal, Tabasco, Mexico (520 km SW of Chicxulub crater), was carried out to assess their formation conditions and genetic relation during the impact process. The reaction of silicate ejecta particles with hot volatiles during atmospheric transport may have induced alteration processes, e.g., silicification and cementation, observed in the ejecta deposits. The various microstructures of calcite ejecta particles are interpreted to reflect different thermal histories at postshock conditions. Spherulitic calcite particles may represent carbonate melts that were quenched during ejection. A recrystallized microstructure may indicate short, intense thermal stress. Various aggregates document particle-particle interactions and intermixing of components from lower silicate and upper sedimentary target lithologies. Aggregates of recrystallized calcite with silicate melt indicate the consolidation of a hot suevitic component with sediments at ≳750 °C. Accretionary lapilli formed in a turbulent, steam-condensing environment at ~100 °C by aggregation of solid, ash-sized particles. Concentric zones with smaller grain sizes of accreted particles indicate a recurring exchange with a hotter environment. Our results suggest that during partial ejecta plume collapse, hot silicate components were mixed with the fine fraction of local surface-derived sediments, the latter of which were displaced by the preceding ejecta curtain. These processes sustained a hot, gas-driven, lateral basal transport that was accompanied by a turbulent plume at a higher level. The exothermic back-reaction of CaO from decomposed carbonates and sulfates with CO 2 to form CaCO 3 may have been responsible for a prolonged release of thermal energy at a late stage of plume evolution.