Abstract Submarine landslides are common at glaciated continental margins. The onset of large-scale landslides coincides with the initiation of Northern Hemisphere glaciations in the Quaternary. This implies that processes related to glacial cycling provide favourable conditions for submarine landslides at high-latitude margins. Potential processes include glacial deposition patterns and enhanced seismicity. It is also possible that advances and retreats of ice sheets, a highly dynamic process in geological terms, makes slopes discernible to failure by modifying the stress regime. Here, we quantify this effect using 2D finite element modelling of a glaciated continental margin. Different model runs investigate the pore-pressure development in homogeneous, as well as layered, slopes during glaciation when loaded by an ice stream with one or more ice advances. Ice streams cause significant variations in excess pore pressure in the very shallow sediment sequences at the continental shelf. However, lateral fluid flow is not efficient enough to increase pore pressures significantly at the slope, where large-scale submarine slides are observed. Hence, while ice-sheet dynamics appear to favour the occurrence of shallow slides close to the shelf edge, ice sheets seem to be irrelevant for the generation of large-scale submarine landslides at the continental slope.

Abstract The development of overpressure in continental margins is typically evaluated with hydrogeological models. Such approaches are used to both identify fluid flow patterns and to evaluate the development of high pore pressures within layers with particular physical properties that may promote slope instability. In some instances, these models are defined with sediment properties based on facies characterization and proxy values of porosity; permeability or compressibility are derived from the existing literature as direct measurements are rarely available. This study uses finite-element models to quantify the differences in computed overpressure generated by fine-grained hemipelagic sediments from the Gulf of Cadiz, offshore Martinique and the Gulf of Mexico, and their consequences in terms of submarine slope stability. By comparing our simulation results with in situ pore pressure data measured in the Gulf of Mexico, we demonstrate that physical properties measured on volcanic-influenced hemipelagic sediments underestimate the computed stability of a submarine slope. Physical properties measured on sediments from the study area are key to improving the reliability and accuracy of overpressure models, and when that information is unavailable, literature data from samples with similar lithologies, composition and depositional settings enable better assessment of the overpressure role as a pre-conditioning factor in submarine landslide initiation.

Abstract Marine acoustic data are used to map and characterize submarine slope failure along the accretionary prism of Cascadia. Two main styles of slope failure are identified: (1) failures with curved head scarps, which are predominantly associated with incoherent debris-flow deposits; and (2) failures with rectangular head scarps, which are predominantly associated with intact sediment blocks. Rectangular head scarps mostly occur on thrust ridges with slope angles <16° and ridge heights <650 m, whereas curved head scarps occur predominantly on steeper and higher ridges. Off Vancouver Island, failure style and head-scarp geometry also change with ridge azimuth. We propose that the curved head scarps and debris flows may be a result of higher kinetic forcing of the downsliding sediments and a higher degree of mixing. At the more gently sloped, less elevated ridges, the kinetic forcing may be smaller, which leads to intact failure masses. Extensional faults at ridges with curved scarps may result from oversteepening and collapse of the sediments that cannot withstand their own weight due to limited internal shear strength. The slide geometries and potential controls on failure style may inform subsequent studies in assessing the risks for tsunami generation from submarine slope failures along the Cascadia margin.

Abstract Landslides are common in aquatic settings worldwide, from lakes and coastal environments to the deep sea. Fast-moving, large-volume landslides can potentially trigger destructive tsunamis. Landslides damage and disrupt global communication links and other critical marine infrastructure. Landslide deposits act as foci for localized, but important, deep-seafloor biological communities. Under burial, landslide deposits play an important role in a successful petroleum system. While the broad importance of understanding subaqueous landslide processes is evident, a number of important scientific questions have yet to receive the needed attention. Collecting quantitative data is a critical step to addressing questions surrounding subaqueous landslides. Quantitative metrics of subaqueous landslides are routinely recorded, but which ones, and how they are defined, depends on the end-user focus. Differences in focus can inhibit communication of knowledge between communities, and complicate comparative analysis. This study outlines an approach specifically for consistent measurement of subaqueous landslide morphometrics to be used in the design of a broader, global open-source, peer-curated database. Examples from different settings illustrate how the approach can be applied, as well as the difficulties encountered when analysing different landslides and data types. Standardizing data collection for subaqueous landslides should result in more accurate geohazard predictions and resource estimation.

Abstract The stability of submarine slopes is often characterized using campaign-based geophysical and geotechnical measurements in combination with numerical modelling. However, such one-off measurements do not reflect transient changes in slope stability. In situ monitoring of physical parameters critical for slope stability over periods of months to years can provide crucial information on slope stability and can also be used in an early-warning system for submarine landslides and the possibly resulting tsunamis. We review existing techniques that are capable of monitoring seafloor deformation over long periods of time. Based on numerical models we can identify the magnitude of parameters related to landslide-induced seafloor deformation. Simulations of three different failure scenarios up to the point of failure show that the development of the stress state of a slope and hence stability over time can be captured by measurements of tilt, pressure and strain at the seafloor. We also find that different failure mechanisms induce different deformation signals at the seafloor, in particular tilt. Hence, with a site- and target-specific survey design (or a large pool of instruments), seafloor deformation measurements in combination with numerical modelling can be used to determine the temporal evolution of slope stability as well as to identify underlying failure mechanisms.