ABSTRACT Detrital zircon U-Pb and (U-Th)/He ages from latest Cretaceous–Eocene strata of the Denver Basin provide novel insights into evolving sediment sourcing, recycling, and dispersal patterns during deposition in an intracontinental foreland basin. In total, 2464 U-Pb and 78 (U-Th)/He analyses of detrital zircons from 21 sandstone samples are presented from outcrop and drill core in the proximal and distal portions of the Denver Basin. Upper Cretaceous samples that predate uplift of the southern Front Range during the Laramide orogeny (Pierre Shale, Fox Hills Sandstone, and Laramie Formation) contain prominent Late Cretaceous (84–77 Ma), Jurassic (169–163 Ma), and Proterozoic (1.69–1.68 Ga) U-Pb ages, along with less abundant Paleozoic through Archean zircon grain ages. These grain ages are consistent with sources in the western U.S. Cordillera, including the Mesozoic Cordilleran magmatic arc and Yavapai-Mazatzal basement, with lesser contributions of Grenville and Appalachian zircon recycled from older sedimentary sequences. Mesozoic zircon (U-Th)/He ages confirm Cordilleran sources and/or recycling from the Sevier orogenic hinterland. Five of the 11 samples from syn-Laramide basin fill (latest Cretaceous–Paleocene D1 Sequence) and all five samples from the overlying Eocene D2 Sequence are dominated by 1.1–1.05 Ga zircon ages that are interpreted to reflect local derivation from the ca. 1.1 Ga Pikes Peak batholith. Corresponding late Mesoproterozoic to early Neoproterozoic zircon (U-Th)/He ages are consistent with local sourcing from the southern Front Range that underwent limited Mesozoic–Cenozoic unroofing. The other six samples from the D1 Sequence yielded detrital zircon U-Pb ages similar to pre-Laramide units, with major U-Pb age peaks at ca. 1.7 and 1.4 Ga but lacking the 1.1 Ga age peak found in the other syn-Laramide samples. One of these samples yielded abundant Mesozoic and Paleozoic (U-Th)/He ages, including prominent Early and Late Cretaceous peaks. We propose that fill of the Denver Basin represents the interplay between locally derived sediment delivered by transverse drainages that emanated from the southern Front Range and a previously unrecognized, possibly extraregional, axial-fluvial system. Transverse alluvial-fluvial fans, preserved in proximal basin fill, record progressive unroofing of southern Front Range basement during D1 and D2 Sequence deposition. Deposits of the upper and lower D1 Sequence across the basin were derived from these fans that emanated from the southern Front Range. However, the finer-grained, middle portion of the D1 Sequence that spans the Cretaceous-Paleogene boundary was deposited by both transverse (proximal basin fill) and axial (distal basin fill) fluvial systems that exhibit contrasting provenance signatures. Although both tectonic and climatic controls likely influenced the stratigraphic development of the Denver Basin, the migration of locally derived fans toward and then away from the thrust front suggests that uplift of the southern Front Range may have peaked at approximately the Cretaceous-Paleogene boundary.

Abstract Recent mapping efforts and hydrocarbon exploration in the South Park Basin have brought to light the magnitude in complexity of a structural basin already recognized for its unique sedimentary and tectonic setting. This field trip to one of Colorado’s scenic gems will examine how Paleozoic, Mesozoic, and Cenozoic strata record the tectonic signatures of at least three orogenic episodes. We will cross the Elkhorn–Williams Range thrust system into the structural block caught between Laramide uplifts, and preserving synorogenic sediments from the Pennsylvanian–Permian ancestral Rocky Mountain tectonic episode in juxtaposition with synorogenic sediments from the subsequent Laramide tectonic episode. Late Cretaceous marine sediments from the Western Interior Seaway caught up in complex fold-fault structures between Laramide uplifts create targets for petroleum exploration. Evidence of evaporitic tectonism originating from Pennsylvanian evaporite deposits and hinting at structural complexity dots the landscape. The trip will also explore a post-Laramide surface preserved in a graben developed in the hanging wall of the Elkhorn fault system and view post-Laramide volcanic features. Glacier-carved ranges held up by Precambrian crystalline basement and Paleozoic sediments hardened by contact metamorphism from Paleogene stocks and sills rim the basin. Pleistocene glaciofluvial deposits fan out from the high ranges to blanket the highly deformed basin, masking many of the primary structural features.

Abstract The Paleogene sedimentary deposits of the Colorado Headwaters Basin provide a detailed proxy record of regional deformation and basin subsidence during the Laramide orogeny in north-central Colorado and southern Wyoming. This field trip presents extensive evidence from sedimentology, stratigraphy, structure, palynology, and isotope geochronology that shows a complex history that is markedly different from other Laramide synorogenic basins in the vicinity. We show that the basin area was deformed by faulting and folding before, during, and after deposition of the Paleogene rocks. Internal unconformities have been identified that further reflect the interaction of deformation, subsidence, and sedimentation. Uplift of Proterozoic basement blocks that make up the surrounding mountain ranges today occurred late in basin history. Evidence is given to reinterpret the Independence Mountain uplift as the result of significant normal faulting (not thrusting), probably in middle Tertiary time. While the Denver and Cheyenne Basins to the east were subsiding and accumulating sediment during Late Cretaceous time, the Colorado Headwaters Basin region was experiencing vertical uplift and erosion. At least 1200 m of the upper part of the marine Upper Cretaceous Pierre Shale was regionally removed, along with Fox Hills Sandstone shoreline deposits of the receding Interior Seaway as well as any Laramie Formation–type continental deposits. Subsidence did not begin in the Colorado Headwaters Basin until after 60.5 Ma, when coarse, chaotic, debris-flow deposits of the Paleocene Windy Gap Volcanic Member of the Middle Park Formation began to accumulate along the southern basin margin. These volcaniclastic conglomerate deposits were derived from local, mafic-alkalic volcanic sources (and transitory deposits in the drainage basin), and were rapidly transported into a deep lake system by sediment gravity currents. The southern part of the basin subsided rapidly (roughly 750–1000 m/m.y.) and the drainage system delivered increasing proportions of arkosic debris from uplifted Proterozoic basement and more intermediate-composition volcanic-porphyry materials from central Colorado sources. Other margins of the Colorado Headwaters Basin subsided at slightly different times. Subsidence was preceded by variable amounts of gentle tilting and localized block-fault uplifts. The north-central part of the basin that was least-eroded in early Paleocene time was structurally inverted and became the locus of greatest subsidence during later Paleocene-Eocene time. Middle Paleocene coal-mires formed in the topographically lowest eastern part of the basin, but the basin center migrated to the western side by Eocene time when coal was deposited in the Coalmont district. In between, persistent lakes of variable depths characterized the central basin area, as evidenced by well-preserved deltaic facies. Fault-fold deformation within the Colorado Headwaters Basin strongly affected the Paleocene fluvial-lacustrine deposits, as reflected in the steep limbs of anticline-syncline pairs within the McCallum fold belt and the steep margins of the Breccia Spoon syncline. Slivers of Proterozoic basement rock were also elevated on steep reverse faults in late Paleocene time along the Delaney Butte–Sheep Mountain–Boettcher Ridge structure. Eocene deposits, by and large, are only gently folded within the Colorado Headwaters Basin and thus reflect a change in deformation history. The Paleogene deposits of the Colorado Headwaters Basin today represent only a fragment of the original extent of the depositional basin. Basal, coarse conglomerate deposits that suggest proximity to an active basin margin are relatively rare and are limited to the southern and northwestern margins of the relict basin. The northeastern margin of the preserved Paleogene section is conspicuously fine-grained, which indicates that any contemporaneous marginal uplift was far removed from the current extent of preserved fluvial-lacustrine sediments. The conspicuous basement uplifts of Proterozoic rock that flank the current relict Paleogene basin deposits are largely post-middle Eocene in age and are not associated with any Laramide synuplift fluvial deposits. The east-west–trending Independence Mountain fault system that truncates the Colorado Headwaters Basin on the north with an uplifted Proterozoic basement block is reinterpreted in this report. Numerous prior analyses had concluded that the fault was a low-angle, south-directed Laramide thrust that overlapped the northern margin of the basin. We conclude instead that the fault is more likely a Neogene normal fault that truncates all prior structure and belongs to a family of sub-parallel west-northwest–trending normal faults that offset upper Oligocene-Miocene fluvial deposits of the Browns Park–North Park Formations.

Abstract Stratigraphic models predict sedimentary architecture. Prediction requires understanding systems across a sufficient range of scales. To be predictive a model must address the interaction of multiple process-response relationships. For deep-water systems these processes include (1) subaqueous flow initiation and transformation, (2) linkages between channel, levee and lobe processes, and (3) shelf-to-basin profile evolution. Thickness, lithology and the geomorphic hierarchy of sedimentary bodies are responses that can be used to define phases in deep-water episodes recording both external (allogenic) and internal (autogenic) controls. Shelf-to-basin studies of the Middle Permian Brushy Canyon Formation demonstrate that the more complete basinal record correlates to an incomplete shelf record; this incongruity impacts recognition of allogenic forcing. Preserving the signature of external controls, internal changes in local gradient and topography also impact the deep-water record requiring complete basin analysis. Independent but nested autogenic and allogenic stratigraphic models address these challenges and predict patterns of deep-water sedimentation. Tectonics and climate modulate sediment supply and sea level, which are considered the principal allogenic controls on deep-water sedimentation as described by the phases of the AIGR ( Adjustment-Initiation-Growth-Retreat ) model. The complete AIGR cycle commences with the Adjustment (A) phase, which defines the initial profile gradient and topography. The Initiation (I), Growth (G), and Retreat (R) phases describe variations in sedimentary response. Autogenic controls on deep-water sedimentation include (1) lateral offset and compensational stacking of lobes, (2) channel migration, switching and avulsion, and (3) longitudinal translation of the channel-lobe transition zone. The BCFS ( Build-Cut-Fill-Spill ) model describes autogenic controls on local gradient and confinement based on a hierarchy of channel-fill, channel-flank, and lobe sedimentary bodies, which vary in proportion and arrangement in each phase. The sedimentation phases of the AIGR and BCFS models describe the systematic increase and decrease in sedimentation energy recorded in hierarchical stratigraphy. When linked to gradient, the models form the axes of a sedimentary system energy matrix (SSEM) for sedimentary architecture. The BCFS model for submarine channels is embedded within the AIGR basin model and, together they facilitate the correlation of a hierarchy of internally and externally generated stratigraphic cycles.