Abstract Reconstruction of the Western Himalaya requires three subduction systems operating beneath the Spong arc, Dras–Kohistan arc and the Asian continent during the Late Cretaceous–Paleocene. The timing of the closure of the Neo-Tethys Ocean along the Indus Suture Zone (ISZ) in Ladakh and south Tibet has been proposed to be as old as c. 65 Ma and as young as c. 37 Ma. The definition of the India–Asia collision can span >15 myr from the first touching of Indian continental crust with Asian crust to the final marine sedimentation between the two plates. There is good geological evidence for a Late Cretaceous–Early Paleocene phase of folding, thrusting and crustal thickening of Indian Plate shelf carbonates associated with obduction of ophiolites. There is no geological evidence of any oceanic ‘Greater Indian Basin’ separating the northern Tethyan and Greater Himalaya from India. There is clear evidence to support final ending of marine sedimentation along the ISZ at 50 Ma (planktonic foraminifera zone P7–P8). There is no evidence for diachroneity of collision along the Pakistan–Ladakh–South Tibet Himalaya. The timing of ultrahigh-pressure metamorphism cannot be used to constrain India–Asia collision, and the timing of high-grade kyanite- and sillimanite-grade metamorphism along the Greater Himalaya can only give a minimum age of collision.

Abstract Reconstructing the stratigraphic architecture of deposits prior to Cenozoic Himalayan uplift is critical for unravelling the structural, metamorphic, depositional and erosional history of the orogen. The nature and distribution of Proterozoic and lower Paleozoic strata have helped elucidate the relationship between lithotectonic zones, as well as the geometries of major bounding faults. Stratigraphic and geochronological work has revealed a uniform and widespread pattern of Paleoproterozoic strata >1.6 Ga that are unconformably overlain by <1.1 Ga rocks. The overlying Neoproterozoic strata record marine sedimentation, including a Cryogenian diamictite, a well-developed carbonate platform succession and condensed fossiliferous Precambrian–Cambrian boundary strata. Palaeontological study of Cambrian units permits correlation from the Indian craton through three Himalayan lithotectonic zones to a precision of within a few million years. Detailed sedimentological and stratigraphic analysis shows the differentiation of a proximal realm of relatively condensed, nearshore, evaporite-rich units to the south and a distal realm of thick, deltaic deposits to the north. Thus, Neoproterozoic and Cambrian strata blanketed the northern Indian craton with an extensive, northward-deepening, succession. Today, these rocks are absent from parts of the inner Lesser Himalaya, and the uplift and erosion of these proximal facies explains a marked change in global seawater isotopic chemistry at 16 Ma.

Abstract This chapter summarizes the available stratigraphic, petrographical and mineralogical evidence from sediments and sedimentary rocks on the evolution of the Himalayan belt and its associated foreland basin. The use of compositional signatures of modern sediments to unravel provenance changes and palaeodrainage evolution through time is hampered by a poor match with detrital modes of ancient strata markedly affected by selective chemical dissolution of unstable minerals during diagenesis. Only semi-quantitative diagnoses can thus be attempted. Volcanic detritus derived from Transhimalayan arcs since India–Asia collision onset at c. 60 Ma was deposited onto the Indian lower plate throughout the Protohimalayan stage, with the exception of the Tansen region of Nepal that is characterized by quartz-arenites yielding orogen-derived zircon grains. During the Eohimalayan stage, begun in the late Eocene when most sedimentation ceased in the Tethys Himalayan domain, low-rank metasedimentary detritus was overwhelming in the central foreland basin, where a widespread unconformity developed spanning locally as much as 20 myr. Volcanic detritus from Transhimalayan arcs remained significant in northern Pakistan. Arrival of higher-rank metamorphic detritus since the earliest Miocene, and the successive occurrence of garnet, staurolite, kyanite and finally sillimanite, characterized the Neohimalayan stage, when repeated compositional changes in the foreland-basin succession document the stepwise propagation of crustal deformation across the Indian Plate margin and widening of the thrust belt with exhumation of progressively more external tectonic units. The correspondence in time between the activity of major thrusts and petrofacies changes indicates a promising approach to accurately reconstruct the geological evolution of the coupled orogen–basin system. Conversely, a poor conceptual framework and the general reliance on ad hoc mechanisms to explain phenomena unpredicted by simplified models represent major factors limiting the robustness of palaeotectonic interpretations. Improved knowledge requires taking into full account the dynamic role played by still poorly understood subduction processes – rather than exclusively the effect of passive loading – as well as the role played by the presence of inherited structures on the downgoing Indian Plate, which control both lateral variability of orogenic deformation and the location of depocentres in the foreland basin.

Abstract The Kohistan–Ladakh terrane, northern Pakistan/India, offers a unique insight into whole-arc processes. This research review presents summaries of fundamental crustal genesis and evolution models. Earlier work focused on arc sequence definition. Later work focused on holistic petrogenesis. A new model emerges of an unusually thick ( c. 55 km) arc with a c. 30 km-thick batholith. Volatile-rich, hornblende ± garnet ± sediment assimilation-controlled magmatism is predominant. The thick batholith has a complementary mafic–ultramafic residue. Kohistan crustal SiO 2 contents are estimated at >56%. The new-Kohistan, silicic-crust model contrasts with previous lower SiO 2 estimates ( c. 51% SiO 2 crust) and modern arcs that imply <35 km crustal thicknesses and arc batholith thicknesses of c. 7 km. A synthetic overview of Kohistan–Ladakh volcanic rocks presents a model of an older, cleaved/deformed Cretaceous volcanic system at least 800 km across strike. The Jaglot–Chalt–Dras–Shyok volcanics exhibit predominant tholeiitic-calc-alkaline signatures, with a range of arc-related facies/tectonic settings. A younger, post-collisional, Tertiary silicic volcanic system (the Shamran–Dir–Dras-2–Khardung volcanics) lie unconformably upon Cretaceous basement, and erupted within an intra-continental tectonic setting. Kohistan–Ladakh tectonic model controversies remain. In essence, isotope-focused researchers prefer later (Tertiary) collisions, whilst structural field-geology-orientated researchers prefer an older (Cretaceous) age for the Northern/Shyok Suture.

Abstract Magmatic arcs associated with subduction zones are the dominant active locus of continental crust formation, and evolve in space and time towards magmatic compositions comparable to that of continental crust. Accordingly, the secular evolution of magmatic arcs is crucial to the understanding of crust formation processes. In this paper we present the first comprehensive U–Pb, Hf, Nd and Sr isotopic dataset documenting c. 120 myr of magmatic evolution in the Kohistan-Ladakh paleo-island arc. We found a long-term magmatic evolution that is controlled by the overall geodynamic of the Neo-Tethys realm. Apart from the post-collisionnal melts, the intra-oceanic history of the arc shows two main episodes (150–80 Ma and 80–50 Ma) of distinct geochemical signatures involving the slab and the sub-arc mantle components that are intimately linked to the slab dynamics.

Abstract Himalayan high-pressure metamorphic rocks are restricted to three environments: the suture zone; close to the suture zone; and (mostly) far (>100 km) from the suture zone. In the NW Himalaya and South Tibet, Cretaceous-age blueschists (glaucophane-, lawsonite- or carpholite-bearing schists) formed in the accretionary wedge of the subducting Neo-Tethys. Microdiamond and associated phases from suture-zone ophiolites (Luobusa and Nidar) are, however, unrelated to Himalayan subduction–collision processes. Deeply subducted and rapidly exhumed Indian Plate basement and cover rocks directly adjacent to the suture zone enclose eclogites of Eocene age, some coesite-bearing (Kaghan/Neelum and Tso Morari), formed from Permian Panjal Trap, continental-type, basaltic magmatic rocks. Eclogites with a granulite-facies overprint, yielding Oligocene–Miocene ages, occur in the anatectic cordierite ± sillimanite-grade Indian Plate mostly significantly south of the suture zone (Kharta/Ama Drime/Arun, north Sikkim and NW Bhutan) but also directly at the suture zone at Namche Barwa. The sequence carpholite-, coesite-, kyanite- and cordierite-bearing rocks of these different units demonstrates the transition from oceanic subduction to continental collision via continental subduction. The granulitized eclogites in anatectic gneisses preserve evidence of former thick crust as in other wide hot orogens, such as the European Variscides.

Abstract Current tectonic understanding of the Nanga Parbat–Haramosh massif (NPHM) is reviewed, developing new models for the structure and deformation of the Indian continental crust, its thermorheological evolution, and its relationship to surface processes. Comparisons are drawn with the Namche Barwa–Gyala Peri massif (NBGPM) that cores an equivalent syntaxis at the NE termination of the Himalayan arc. Both massifs show exceptionally rapid active denudation and riverine downcutting, identified from very young cooling ages measured from various thermochronometers. They also record relicts of high-pressure metamorphic conditions that chart early tectonic burial. Initial exhumation was probably exclusively by tectonic processes but the young, and continuing emergence of these massifs reflects combined tectonic and surface processes. The feedback mechanisms implicit in aneurysm models may have been overemphasized, especially the role of synkinematic granites as agents of rheological softening and strain localization. Patterns of distributed ductile deformation exhumed within the NPHM are consistent with models of orogen-wide gravitation flow, with the syntaxes forming the lateral edges to the flow beneath the Himalayan arc.

Abstract The Pakistan part of the Himalaya has major differences in tectonic evolution compared with the main Himalayan range to the east of the Nanga Parbat syntaxis. There is no equivalent of the Tethyan Himalaya sedimentary sequence south of the Indus–Tsangpo suture zone, no equivalent of the Main Central Thrust, and no Miocene metamorphism and leucogranite emplacement. The Kohistan Arc was thrust southward onto the leading edge of continental India. All rocks exposed to the south of the arc in the footwall of the Main Mantle Thrust preserve metamorphic histories. However, these do not all record Cenozoic metamorphism. Basement rocks record Paleo-Proterozoic metamorphism with no Cenozoic heating; Neo-Proterozoic through Cambrian sediments record Ordovician ages for peak kyanite and sillimanite grade metamorphism, although Ar–Ar data indicate a Cenozoic thermal imprint which did not reset the peak metamorphic assemblages. The only rocks that clearly record Cenozoic metamorphism are Upper Paleozoic through Mesozoic cover sediments. Thermobarometric data suggest burial of these rocks along a clockwise pressure–temperature path to pressure–temperature conditions of c. 10–11 kbar and c. 700°C. Resolving this enigma is challenging but implies downward heating into the Indian plate, coupled with later development of unconformity parallel shear zones that detach Upper Paleozoic–Cenozoic cover rocks from Neoproterozoic to Paleozoic basement rocks and also detach those rocks from the Paleoproterozoic basement.

Abstract Reconstruction of the protolith lithostratigraphy of amphibolite-facies metasedimentary rocks of the Greater Himalayan Series (GHS) in Nepal documents a single, long-lived passive-margin succession that was deposited along the northern margin of the Indian Craton. In the Langtang area, Paleoproterozoic gneisses are unconformably overlain by a succession of upper Neoproterozoic–Ordovician fluvio-deltaic quartzite, basinal pelite and psammitic beds that grade upsection into micaceous semipelite and pelite. U–Pb zircon geochronology yields maximum depositional ages between c. 815 and 460 Ma for the GHS in Langtang. Regional variations in the composition and thickness of the GHS along the length of the Himalaya are attributed to siliciclastic depocentres centred on Zanskar in northern India, Langtang and Everest in central to western Nepal, which contrast with coeval marine carbonate shelf deposition in the Annapurna region. The protolith lithostratigraphy documented for Langtang provides a coherent framework for interpreting subsequent Cenozoic Himalayan deformation, specifically the homogeneously distributed layer-normal shortening (i.e. flattening) and layer-parallel stretching (i.e. transport-parallel stretching) that characterizes the GHS. Within the context of a single protracted northern Indian marginal sedimentary succession, the distinction between the Lesser, Greater and Tethyan Himalaya is structural rather than lithostratigraphic in origin.

Abstract Joining geological mapping, structural analysis, petrology and geochronology allowed the internal architecture of the Greater Himalayan Sequence (GHS) to be unraveled. Several top-to-the-south/SW tectonic–metamorphic discontinuities developed at the regional scale, dividing it into three main units exhumed progressively from the upper to the lower one, starting from c. 40 Ma and lasting for several million years. The activity of shear zones has been constrained and linked to the pressure–temperature–time–deformation ( P – T – t – D ) evolution of the deformed rocks by the use of petrochronology. Hanging wall and footwall rocks of the shear zones recorded maximum P – T conditions at different times. Above the Main Central Thrust, a cryptic tectonometamorphic discontinuity (the High Himalayan Discontinuity (HHD)) has been recognized in Central-Eastern Himalaya. The older shear zone, that was active at c. 41–28 Ma, triggered the earlier exhumation of the uppermost GHS and allowed the migration of melt, which was produced at peak metamorphic conditions and subsequently produced in abundance at the time of the activation of the HHD. Production of melt continued at low pressure, with nearly isobaric heating leading to the genesis and emplacement of andalusite- and cordierite-bearing granites. The timing of the activation of the shear zones from deeper to upper structural levels fits with an in-sequence shearing tectonic model for the exhumation of the GHS, further affected by out-of-sequence thrusts.

Abstract This review presents an objective account of metamorphic, microstructural and geochronological studies in the Greater Himalayan Sequence (GHS) and adjacent units in Nepal in the light of recent research. The importance of integrated, multidisciplinary studies is highlighted. A personal view is presented of strategies for determining pressure–temperature evolution, and of petrological processes at the micro scale, particularly in relation to departures from equilibrium and the behaviour of partially-melted rock systems. Evidence has accumulated for the existence within the GHS of a High Himalayan Discontinuity, marked by differences in timing of peak metamorphism in the hanging wall and footwall, and changes in P–T gradients and paths. Whether or not this is a single continuous horizon, it forms at each location the lower boundary to a migmatitic zone capable of ductile flow, and separates the GHS into an upper division in which channel flow may have operated in the interval 25–18 Ma, and a lower division characterized by an inverted metamorphic gradient, and by metamorphic ages that decrease downsection and are best explained by sequential accretion of footwall slices between 20 and 6 Ma. An overall model for extrusion of the GHS is still not resolved.

Abstract Recognition and subsequent study of the syn-convergent low-angle normal faults and shear zones – the South Tibetan Detachment System (STDS) – that form the upper boundary of the Himalayan mid-crust fundamentally changed views of how the Himalayan orogenic system developed. This paper reviews the past four decades of discovery and major advances in our understanding of the detachment system. Significantly conflicting maps of the fault trace, as well as proposed extensions of the detachment system up to hundreds of kilometres both up and down dip of the main fault trace, call for a unifying definition of the detachment system based on structural criteria. The different proposed models for the formation of the STDS during tectonic evolution of the Himalayan orogen are compared. Finally, critical outstanding questions about the origin, extent and character of the detachment system are identified and point to future directions for research.

Abstract Gneiss domes in the Himalaya and southern Tibet record processes of crustal thickening, metamorphism, melting, deformation and exhumation during the convergence between the Indian and Eurasian plates. We review two types of gneiss domes: North Himalayan gneiss domes (NHGD) and later domes formed by orogen-parallel extension. Located in the southern Tibetan Plateau, the NHGD are cored by granite and gneiss, and mantled by the Tethyan sedimentary sequence. The footwall of these were extruded southwards from beneath the Tibetan Plateau and subsequently warped into a domal shape. The second class of domes were formed during displacement on normal-sense shear zones and detachments that accommodated orogen-parallel extension during the Late Miocene. In some cases, formation of these domes involved an early stage of southwards-directed extrusion prior to doming. We review evidence for orogen-parallel extension to provide context for the formation of these gneiss domes. Compilations of pressure–temperature–time–deformation data and temperature–time paths indicate differences between dome types, and we accordingly propose new terminology. Type 1 domes are characterized by doming as an artefact of post-high-temperature exhumation processes in the Middle Miocene. Type 2 domes formed in response to exhumation during orogen-parallel extension in the Late Miocene that potentially post-dates south-directed extrusion.

Abstract This article summarizes recent advances in our knowledge of the past 1000 years of earthquakes in the Himalaya using geodetic, historical and seismological data, and identifies segments of the Himalaya that remain unruptured. The width of the Main Himalayan Thrust is quantified along the arc, together with estimates for the bounding coordinates of historical rupture zones, convergence rates, rupture propagation directions as constrained by felt intensities. The 2018 slip potential for fifteen segments of the Himalaya are evaluated and potential magnitudes assessed for future earthquakes should these segments fail in isolation or as contiguous ruptures. Ten of these fifteen segments are sufficiently mature currently to host a great earthquake (M w ≥ 8). Fatal Himalayan earthquakes have in the past occurred mostly in the daylight hours. The death toll from a future nocturnal earthquake in the Himalaya could possibly exceed 100 000 due to increased populations and the vulnerability of present-day construction methods.

Abstract This chapter examines the along-arc variation in the crustal structure of the Himalayan Mountain Range. Using results from published seismological studies, plus large teleseismic body-wave and surface-wave datasets which we analyse, we illustrate the along-arc variation by comparing the crustal properties beneath four representative areas of the Himalayan Mountain Range: the Western Syntaxis, the Garhwal–Kumaon, the Eastern Nepal–Sikkim, and the Bhutan–Northeastern India regions. The Western Syntaxis and the Bhutan–Northeastern India regions have a complicated structure extending far out in front of the main Range, whereas the Central Himalaya appear to have a much simpler structure. The deformation is more distributed beneath the western and eastern ends of the Range, but in general, the crust gradually thickens from c. 40 km on the southern side of the Foreland Basin to c. 80 km beneath the Tethys Himalaya. While the gross crustal structure of much of the Himalaya is becoming better known, our understanding of the internal structure of the Himalaya is still sketchy. The detailed geometry of the Main Himalayan Thrust and the role of the secondary structures on the underthrusting Indian Plate are yet to be characterized satisfactorily.

Abstract The history of pre-Cretaceous subduction accretion and erosion along the Yarlung Suture Zone remains poorly constrained. We present new geological mapping along c. 200 km of the suture zone, 4881 detrital zircon U–Pb ages, and sandstone petrography for the subduction complex and Tethyan Himalayan strata. We provide the first documentation of the c. 158 Ma marine Xiazha Formation, which contains volcanic clasts of intermediate to felsic volcanic rocks and ooids with both calcareous and volcanic cores. Based on our new data and synthesis of published data, we present a model in which the Zedong arc represents the southwards migration of the Gangdese arc onto a forearc ophiolite that was generated proximal to the southern Asian margin during Neotethyan slab rollback at 160–150 Ma. This contrasts with previous suggestions that the Zedong arc, Yarlung ophiolites and subduction complex rocks developed above an intra-oceanic subduction zone thousands of kilometres south of Asia. Although Gangdese arc magmatism began in the Middle Triassic, the only forearc units preserved are 160 Ma until collision between the Xigaze forearc basin and Tethyan Himalaya at c. 59 Ma. This suggests that almost all pre-Cretaceous forearc assemblages have been removed by subduction erosion at the trench.