Stability field of the Cl-rich scapolite marialite

Scapolites are widespread rock-forming aluminosilicates, appearing in metasomatic and igneous environments, and metamorphic terrains. Marialite (Na (sub 4) Al (sub 3) Si (sub 9) O (sub 24) Cl) is the Cl-rich end-member of the group. Even though Cl-rich scapolite is presumably stable over a wide range of pressure and temperature, little is known about its stability field. Understanding Cl-rich scapolite paragenesis is important since it can help identify subsurface fluid flow, metamorphic, and isotopic equilibration. Due to its metasomatic nature Cl-rich scapolite is commonly reported in economic ore deposits, hence it is of critical interest to the mineral resource industries who seek to better understand processes contributing to mineralization. In this experimental study two reactions were investigated. (1) The anhydrous reaction of albite + halite to form marialite [3NaAlSi (sub 3) O (sub 8) + NaCl = Na (sub 4) Al (sub 3) Si (sub 9) O (sub 24) Cl]. (2) The hydrothermal equivalent described by H (sub 2) O + Na (sub 4) Al (sub 3) Si (sub 9) O (sub 24) Cl = 3NaAlSi (sub 3) O (sub 8) + liquid, where the liquid is assumed to be a saline-rich hydrous-silicate melt. Experiments were performed using a piston-cylinder press and internally heated gas vessels. The temperature and pressure conditions range from 700-1050 degrees C and 0.5-2.0 GPa, respectively. The starting materials were synthetic phases including end-member marialite, high-albite, and halite. For reaction 1, marialite was found to be stable above 920 to 990 degrees C over a pressure range of 0.65 to 2.0 GPa, but unstable between 800 and 950 degrees C at pressures of 0.5 GPa and lower. For reaction 2, marialite was found to be very intolerant of water, requiring a minimum bulk brine salinity of approximately 0.8 mole fraction of NaCl at 1050 and 1000 degrees C at pressures of 2.0 and 1.5 GPa, respectively. From the location of reaction 1 in pressure-temperature space, thermochemical data for marialite were extracted. Values for the enthalpy of formation (Delta H degrees f) and third-law entropy (S degrees ) for marialite at 298 K and 1 atm have been calculated as -12 167.5 + or - 1.5 kJ/mol and 0.7579 + or - 0.002 kJ/K.mol, respectively, based on existing thermochemical data for high-albite and halite. The main implication of this study is that end-member marialite is only stable at temperatures greater than 920 degrees C and pressures equivalent to a minimum depth of 18 km under extremely dry conditions. These conditions are not generally realized in typical scapolite-bearing rocks, which occur at shallower-levels and in hydrothermal settings, which may be why pure marialite is rarely observed. This study is the first experimentally determined stability for end-member marialite and provides an important reference for quantifying the stability of Cl-rich scapolites found in nature.