To better understand the transport of particles emitted from industrial sources, a research aircraft was flown in the plume of the Horne Copper Smelter in Rouyn-Noranda, Quebec, during winter and summer of 2000. During seven flights the industry performed in-stack sampling for metals while the aircraft determined in-situ chemical and microphysical properties of the particles in the plume over distances of 2 to 27 km. The estimated dilution factors for the samples collected in the plume ranged from 2000 to 50 000 compared with in-stack samples. The ratios of As/Cu, Pb/Cu and Zn/Cu for the stack and in-plume samples show good correspondence. The relative fraction of As, Cu, Pb and Zn in the size bins <2 μm, 2–8 μm and >8 μm aerodynamic diameter were established using a cascade impactor in the plume. The As, Cu and Pb were found in larger fraction in the <2 μm size bin with Zn more equally distributed between the <2 and >8 μm bins. There was no evidence found to support preferential loss of the particles detected in the >8 μm bin over the distances studied. These data provide input needed to initialize models to predict the deposition and transport of the emissions.

You do not currently have access to this article.