Abstract The Abitibi greenstone belt, which straddles the border between Ontario and Quebec in eastern Canada, represents one of the largest and best-preserved Neoarchean greenstone belts in the world. The belt consists of E-trending successions of folded volcanic and sedimentary rocks and intervening domes of intrusive rocks. Submarine volcanism occurred between 2795 and 2695 Ma. Six volcanic assemblages have been defined, recording submarine volcanism during specific periods of time. Komatiite successions within some of these volcanic assemblages are host to magmatic sulfide deposits. However, economically more important are volcanogenic massive sulfide (VMS) deposits, which contain a total of ~775 million tonnes (t) of polymetallic massive sulfides. Approximately half of the endowment is hosted by volcanic rocks of the 2704 to 2695 Ma Blake River assemblage. VMS deposits of this assemblage also account for most of the synvolcanic gold in the Abitibi greenstone belt, totaling over 1,100 t (~35 Moz). Submarine volcanism was followed by the deposition of large amounts of sedimentary material derived from a shallow marine or subaerial hinterland, created as a result of crustal thickening during an early phase of mountain building at ≤2690 to ≤2685 Ma. Submarine volcanic rocks and the overlying flysch-like sedimentary rocks of the Porcupine assemblage were affected by large-scale folding and thrusting during at least one deformational event prior to 2679 Ma. At this time, a terrestrial unconformity surface developed between the older and already deformed rocks of the Abitibi greenstone belt and molasse-like sedimentary rocks of the Timiskaming assemblage, which were deposited between ≤2679 and ≤2669 Ma. Deposition of the Timiskaming sedimentary rocks occurred in extensional basins and was locally accompanied by predominantly alkaline volcanism and related intrusive activity. Crustal shortening and thick-skinned deformation resulted in the structural burial of the molasse-like sedimentary rocks of the Timiskaming assemblage after 2669 Ma. Panels of Timiskaming deposits were preserved in the footwall of these thrusts, which are today represented by major fault zones cutting across the supracrustal rocks of the Abitibi greenstone belt. The structural history of these fault zones is complicated by late-stage strike-slip deformation. The Porcupine-Destor and Larder Lake-Cadillac fault zones of the southern Abitibi greenstone belt as well as second- and third-order splays off these fault zones are host to a number of major orogenic gold deposits. The gold endowment of these deposits exceeds 6,200 t (~200 Moz), making the Abitibi greenstone belt one of the economically most important metamorphic terranes in the world.

Abstract The Timmins-Porcupine gold camp, with a total production of more than 2,125 tonnes (75 Moz) Au to date, represents the largest Archean orogenic greenstone-hosted gold camp worldwide in terms of total gold production. The gold deposits of the camp are distributed over 50 km of strike length along the Destor-Porcupine fault zone, including the giant Hollinger-McIntyre and Dome deposits. These two deposits are archetype examples of large Archean orogenic gold systems. The Dome mine, where the ore is centered on a folded unconformity between Tisdale volcanic rocks and Timiskaming sedimentary deposits, also illustrates the spatial relationship between large gold deposits and a regional unconformity. Gold-associated hydrothermal activity in the camp spanned a long period of time, as illustrated by early stage, barren to low-grade ankerite veins formed between ca. 2690 and 2674 Ma, i.e., prior to or very early in the development of the regional unconformity and sedimentation of the Timiskaming assemblage. Such early carbonatization may represent a key hydrothermal event in the formation of large orogenic gold deposits and illustrates the protracted nature of the large-scale CO 2 -rich metasomatism occurring before and during gold deposition. The bulk of the gold is, however, younger than the Three Nations Formation in the upper part of the Timiskaming assemblage (i.e., ≤2669 ± 1 Ma) and consists mainly of syn-main regional shortening deformation (D 3 ) networks of steeply to moderately dipping fault-fill quartz-carbonate ± tourmaline ± pyrite veins and associated extensional, shallow to moderately dipping arrays of sheeted and sigmoidal veins hosted in highly carbonatized and sericitized rocks. Formation of the gold deposits of the Timmins-Porcupine camp can be related to several key factors. The Destor-Porcupine fault zone represents a first-order control on the location of the camp as this major fault zone allowed large scale CO 2 -rich hydrothermal fluid upflow. The fault zone also controlled the location of the Timiskaming clastic basin, which is thought to have been developed as a result of early-stage synorogenic extensional faulting. Several of the orogenic gold deposits of the camp are spatially associated with the regional unconformity separating folded submarine volcanic rocks of the Tisdale assemblage form the syn-orogenic sedimentary deposits of the Timiskaming assemblage. The current level of erosion is deep enough to expose the unconformity and to maximize the chance of discovery of the orogenic deposits or their footprint, but allowed for preservation of at least part of the gold deposits that are mainly hosted in the highly reactive Fe-rich Tisdale basalt. Additional key factors include the presence of komatiitic and/or basaltic komatiite flows, of competent intrusions that predate the main phase of shortening of the belt and the occurrence of bends in the trace of the Destor-Porcupine fault zone that may have facilitated focus to ore-forming fluid upflow. Furthermore, the camp is characterized by complex structural and rheological discontinuities, competency contrasts, and early stage folds with associated fracture and fault networks that provided highly favorable ground preparation conditions. The exceptional gold enrichment of the camp requires that the hydrothermal fluids originated from favorable source rocks, lending support to the concept of provinciality, which may best explain the exceptional gold fertility of the southern Abitibi greenstone belt.

Abstract The Kidd Creek massive sulfide deposit is one of the world’s largest and highest grade Cu-Zn deposits, with total past production, reserves, and resources to the 9,800-ft level (2,990 m) of 170.9 million tonnes (Mt). The discovery hole, K55-1, was drilled in 1963 and encountered ore at a depth of only 7 m. It intersected 190 m grading 1.21% Cu, 8.5% Zn, 0.8% Pb, and 138 g/t Ag. The deepest ore intersection at 10,200 ft (more than 3,100 m) cut 442 m of mineralization with an average grade of 1.16% Cu, 7.8% Zn, 0.73% Pb, and 84 g/t Ag, remarkably similar to the very first ore intersected 44 years earlier and nearly 3 km above the bottom of the mine. After 50 years of continuous mining (1966–2016), the deposit has produced a total of 140.4 Mt of ore at grades of 2.29% Cu, 6.15% Zn, 0.22% Pb, and 86.2 g/t Ag, worth an estimated US$50 billion. The contained metal (3.8 Mt of Cu, 10.5 Mt of Zn, 0.38 Mt of Pb, and 12.7 million kg of Ag) accounts for nearly one-third of all metal in Archean Cu-Zn massive sulfide deposits worldwide. At the time of writing, production had reached a depth of 9,500 ft (2,896 m), and because of the remarkable continuity of both the tonnage and grade, mining below 9,800 ft (2,990 m) is now being planned to increase the mine life to 2021. It is currently the deepest base metal mine in the world, and after more than 1.8 million meters of drilling (1,800 km), the deposit remains open at depth.

Abstract Komatiitic rocks occur mainly in Archean greenstone belts, less commonly in Paleoproterozoic volcano-sedimentary belts, and only rarely in younger volcanic settings. As in most other greenstone belts worldwide, komatiitic rocks are locally abundant in the Abitibi greenstone belt but generally represent only a small proportion of the volcanic rocks in the volcanic succession. Although only locally exposed, glacially sculpted exposures of only weakly metamorphosed and mildly deformed komatiites of mineralized and unmineralized komatiites in the Abitibi greenstone belt are among the best in the world, characterized by excellent textural preservation and, in some cases, excellent mineralogical preservation. Komatiitic rocks in the Abitibi greenstone belt occur predominantly within the Pacaud (2750–2735 Ma), Stoughton-Roquemaure (2723–2720 Ma), Kidd-Munro (2720–2710 Ma), and Tisdale (2710–2704 Ma) assemblages, but have recently also been recognized in lesser abundances within the Deloro (2734–2724 Ma) and Porcupine (≤2690–≤2685 Ma) assemblages. Overall, the komatiitic rocks present in these assemblages are characterized by a wide variety of lithofacies (textural, compositional) and flow facies; however, a regional analysis of komatiite physical volcanology reveals some fundamental differences between each of the komatiite-bearing assemblages. The Kidd-Munro and Tisdale komatiite-bearing assemblages contain the largest volumes of komatiitic rocks, in particular thick, highly magnesian cumulate lava channels and channelized sheet flows. This suggests that the magma discharge rates were higher for these assemblages and/or that they formed more proximal to the eruptive site. However, the recently discovered Grasset Ni-Cu-(PGE) deposit hosted within relatively high MgO cumulate rocks that are interpreted to occur within the Deloro assemblage highlights the possibility of the other komatiite-bearing assemblages to contain similarly prospective volcanic and/or subvolcanic facies. Geochemical data indicate that regardless of age or petrogenetic affinity (Al-undepleted vs. Al-depleted vs. Ti-enriched vs. Fe-rich), almost all of the parental magmas were undersaturated in sulfide prior to emplacement and therefore represent favorable magma sources for Ni-Cu-(PGE) mineralization. Volcanological data indicate that almost all komatiite-associated Ni-Cu-(PGE) deposits in the Abitibi greenstone belt appear to be localized in lava channels or channelized sheet flows, which have the capacity to thermomechanically erode S-bearing country rocks and to efficiently transfer metals from the magma to sulfide xenomelts. Three type localities (Spinifex Ridge in La Motte Township, Pyke Hill in Munro Township, and Alexo in Dundonald Township) illustrate how physical volcanology (lava channelization) and stratigraphic environment (S source) need to operate quasi-simultaneously to allow for the genesis of significant amounts of Ni-Cu-(PGE) sulfides within a komatiitic succession. As not all komatiite magma pathways are mineralized, one of the most important challenges is to be able to distinguish potentially mineralized successions from barren successions.

Abstract The Larder Lake-Cadillac Break is a gold metallotect, which extends for more than 250 km from Matachewan in Ontario to Val-d’Or in Quebec. For much of its length it juxtaposes older komatiitic rocks against younger sedimentary units. Among the adjacent sedimentary rocks are distinctive intervals of polymict conglomerate and crossbedded sandstone, which make up part of the Timiskaming Group that unconformably overlies previously folded volcanic strata. Rocks in the vicinity of the break are commonly strongly carbonatized, with the type and abundance of carbonate minerals being controlled largely by protolith composition. Shoshonitic to alkalic igneous rocks occur along the break as volcanic units within the Timiskaming, as plutonic rocks in syn-Timiskaming stocks and plugs, and as local arrays of albitite dikes of intermediate composition. High-strain dislocative deformation is variably developed along the break but its intensity is in part a reflection of metasomatic phyllosilicates in the affected rocks. Gold deposits tend to form clusters along the break and their relationship to it is two-fold: a subset of geologically similar deposits are localized in direct proximity to the break but the majority of gold in the region is found in diverse settings away from it with no clear genetic connection.

Abstract The Noranda camp in the southern Abitibi greenstone belt comprises over 20 volcanogenic massive sulfide deposits hosted by volcanic rocks of the 2704–2695 Ma Blake River Group. Decades of research and exploration have provided a firm understanding of the characteristics of these deposits as well as the geological controls on deposit location. Observations made on the deposits of the Noranda camp significantly contributed to the syngenetic model of massive sulfide formation and shaped the current understanding of ancient and modern sea-floor hydrothermal systems. The Horne and Quemont deposits, which are the largest deposits in the Noranda camp, are hosted by 2702 Ma felsic volcanic successions dominated by volcaniclastic rocks. The massive sulfide ores of these deposits largely formed through processes of subseafloor infiltration and replacement of the highly permeable wall rocks. Laterally extensive hydrothermal alteration halos dominated by chlorite and sericite surround the replacement ores. The Horne deposit formed in an extensional setting in a graben bounded by synvolcanic faults. Rapid extension accompanying deposit formation resulted in the upwelling of mantle-derived mafic melts and the emplacement of a thick package of mafic rocks in the stratigraphic hanging wall of the deposit. Most of the massive sulfide deposits in the Noranda camp are hosted by a 2700–2698 Ma bimodal volcanic succession that formed in a large volcanic subsidence structure to the north. The ~2,000-m-thick lava flow-dominated volcanic package is floored by the large, multiphase, synvolcanic Flavrian pluton. The deposits in this part of the Noranda camp are small (<5 million tonnes) and primarily formed as sulfide mounds on the ancient sea floor. Synvolcanic structures provided cross-stratal permeability for the hydrothermal fluids and controlled the location of volcanic vents. Thin tuffaceous units mark the sea-floor positions hosting the massive sulfide mounds within the flow-dominated volcanic succession. The concordant massive sulfide lenses overlie discordant alteration pipes composed of chlorite- and sericite-altered rocks. Contact metamorphism associated with the emplacement of the ~2690 Ma Lac Dufault pluton converted the hydrothermal alteration pipes into cordierite-anthophyllite assemblages. Recent brownfields exploration successes have demonstrated that massive sulfide discoveries are still possible in one of Canada’s most mature mining camp through three-dimensional geological modeling performed at the camp scale. Geologic target generation through computer modeling has reversed the general trend of progressively deeper exploration with time in the Noranda camp. Deep exploration currently focuses on the reevaluation of a previously uneconomic low-grade ore zone at the Horne deposit.

Abstract The 2698 Ma LaRonde Penna deposit, with over 71 Mt of ore at 3.9 g/t Au (280 t Au or ~9 Moz Au), is the second largest Au-rich volcanogenic massive sulfide (VMS) deposit in the world. It is part of the Doyon-Bousquet-LaRonde mining camp in the eastern part of the Blake River Group. The deposits of the Doyon-Bousquet-LaRonde mining camp are hosted by the volcanic rocks of the Hébé-court (base) and Bousquet (top) formations that form a southward-younging homoclinal sequence, with nearly vertical dips due to a north-south compressional event responsible for the development of an E-W–trending, steeply S-dipping, penetrative schistosity under prograde, upper greenschist to lower amphibolite facies meta-morphism. The E-trending, steeply S-dipping schistosity is associated with strong flattening, transposition, and minor folding of the volcanic rocks, alteration zones, and sulfide lenses. The ore lenses at LaRonde Penna, which are stacked in the upper half of the Bousquet Formation, are characterized by semimassive to massive sulfides or narrow intervals of transposed sulfide veins and veinlets. The synvolcanic hydrothermal alteration at LaRonde Penna now corresponds to mappable upper greenschist-lower amphibolites-grade metamorphic assemblages. In the upper part of the deposit, the 20 North lens comprises a transposed pyrite-chalcopyrite (Au-Cu) stockwork (20N Au zone) overlain by a pyrite-sphalerite-galena-chalcopyrite-pyrrhotite (Zn-Ag-Pb) massive sulfide lens (20N Zn zone). The 20 North lens (20N Au and 20N Zn zones) is underlain by a large, semiconformable alteration zone that comprises a proximal quartz-Mn-garnet-biotite-muscovite alteration assemblage. The 20N Zn zone tapers with depth in the deposit and gives way to the 20N Au zone. At depth in the deposit, the 20N Au zone consists of semimassive sulfides (Au-rich pyrite and chalcopyrite) enclosed by a large aluminous alteration assemblage interpreted to be the metamorphic equivalent of an advanced argillic alteration zone. At LaRonde Penna, the presence of sulfide lenses characterized by Au-rich portions and base metal-rich portions demonstrates that a VMS system can generate mineralization styles that gradually evolve, both in space and time, from neutral (Au-Cu-Zn-Ag-Pb ore), to transitional, to acidic (advanced argillic alteration and Au ± Cu-rich ore) in response to the evolving local geologic setting.

Abstract The Cadillac mining camp is known for its numerous, but relatively small, orogenic gold deposits, which are spatially associated with the Larder Lake-Cadillac fault zone. The Lapa deposit, with a total endowment of 36 t Au (1.15 Moz), represents the largest gold deposit of the Cadillac mining camp. The Lapa deposit main ore zones are mostly hosted in the Piché Group ultramafic to intermediate volcanic units that are strongly transposed and separated by subvertical, anastomosed high-strain corridors that are part of the Larder Lake-Cadillac fault zone. There are 12 ore zones that are stacked from north to south, forming a series of subparallel, E-striking (main foliation-parallel), steeply dipping south to subvertical “lenses.” The ore consists mainly of very fine-grained (≤1 mm), disseminated sulfides (arsenopyrite and pyrrhotite with traces of chalcopyrite, pyrite, and sphalerite), sulfosalts, native Au, and native Sb. Three amphibolite-grade metamorphosed proximal alteration assemblages are present at Lapa, namely bio-tite-bearing, sericite-bearing, and actinolite-bearing assemblages. The distribution of the three assemblages, defined by the most abundant mineral, is at least in part controlled by the primary host-rock composition. The proximal alteration facies give way to chlorite- (upper half of the deposit at <1,000 m) and hornblende-bearing (lower half of the deposit at >1,000 m) assemblages a few meters to a few decimeters away from the ore zones. The isograd defined by the presence of actinolite in the proximal alteration assemblage and hornblende in the distal assemblage below 1,000 m correlates with a shift from an Au-As association in the lowermost levels of the mine to an Au-Sb association at depth. This variation is thought to be due to varying heat and fluid flow regimes at different times and crustal levels in the fault, with the upgrading of early, “low-grade” Au during prograde and retrograde metamorphism. The Cadillac camp, including the Lapa deposit, is an excellent example of the camp to deposit to stope controls exerted by the structural and lithologic setting on the nature, style, and geometry of greenstone-hosted orogenic gold deposits.

Abstract The Canadian Malartic low-grade bulk tonnage gold mine (total production and reserves of 303.3 t or 10.7 Moz at 0.97 g/t) is located in the Archean Abitibi greenstone belt, immediately south of the crustal-scale Larder Lake-Cadillac fault zone. The deposit is predominantly hosted in clastic metasedimentary rocks of the Pontiac Group and, to a lesser extent, in subalkaline porphyritic quartz monzodiorite and granodiorite. The quartz monzodiorite and granodiorite yielded syn-Timiskaming U-Pb ID-TIMS zircon ages of 2677.8 ± 1.5 and 2678.4 ± 1.7 Ma, respectively. The ore, which is characterized by a Au-Te-W-S-Bi-Ag ± Pb ± Mo metallic signature, mainly consists of quartz-carbonate vein stockworks and replacement zones with disseminated pyrite. The ore zones are dominantly oriented subparallel to a NW-striking S 2 foliation and to the E-striking and S-dipping Sladen fault, thus forming NW-SE and E-W mineralized trends. In both the sedimentary rocks and the quartz monzodiorite, the proximal and distal alteration zones are characterized by the presence of calcite and ferroan dolomite, respectively. In the sedimentary rocks, the ore zones show a wide distal biotite alteration halo with proximal assemblages made up of albite and/or microcline with pyrite. The quartz monzodiorite comprises a distal hematite-bearing alteration zone that is overprinted by proximal microcline + albite + quartz + pyrite replacement zones. The metallic signature of the ore, the presence of mineralized stockworks, the potassic alteration (biotite/microcline), and an association with ca. 2678 Ma porphyritic intrusions suggest the possibility of an early, syn-Timiskaming magmatic-hydrothermal auriferous event in the area. However, this study indicates that gold mineralization and its distribution at Canadian Malartic are largely controlled by D 2 deformation and related features such as faults, shears, and high-strain zones. Of particular importance are the S 2 cleavage developed in the hinge zone of F 2 folds, and the Sladen fault. Molybdenite from high-grade ore yielded a Re-Os age of 2664 ± 11 Ma that is compatible with a syn-D 2 timing for the bulk of the mineralization. The main characteristics of the Canadian Malartic deposit are thus best explained by a syndeformational event (D 2 ; ca. 2670–2660 Ma) potentially superimposed onto a gold-bearing magmatic/hydrothermal intrusion-related system associated with Timiskaming-age porphyritic intrusions emplaced along the crustal-scale Larder Lake-Cadillac fault zone.

Abstract Epigenetic gold deposits in metamorphic terranes include those of the Precambrian shields (approx 23,000-25,000 t Au), particularly the Late Archean greenstone belts and Paleoproterozoic fold belts, and of the late Neoproterozoic and younger Cordilleran-style orogens (approx 22,000 t lode and 15,500 t placer Au), mainly along the margins of Gondwana, Laurentia, and the more recent circum-Pacific. Ore formation was concentrated during the time intervals of 2.8 to 2.55 Ga, 2.1 to 1.8 Ga, and 600 to 50 Ma. Prior to the last 25 years, ores were defined by grades of 5 to 10 g/t Au in underground mines; present-day economics, open-pit mining, and improved mineral processing procedures allow recovery of ores of < 1 g/t Au, which has commonly led to the recent reworking of lower gradEzones in many historic orebodies. Most of these deposits formed synchronously with late stages of orogeny and are best classified as orogenic gold deposits, which may be subdivided into epizonal, mesozonal, and hypozonal subtypes based on pressure-temperature conditions of ore formation. A second type of deposit, termed intrusion-related gold deposits, developed landward of Phanerozoic accreted terranes in the Paleozoic of eastern Australia and the Mesozoic of the northern North American Cordillera. These have an overall global distribution that is still equivocal and are characterized by an intimate genetic association with relatively reduced granitoids. The majority of gold deposits in metamorphic terranes are located adjacent to first-order, deep-crustal fault zones, which show complex structural histories and may extend along strike for hundreds of kilometers with widths of as much as a few thousand meters. Fluid migration along such zones was driven by episodes of major pressure fluctuations during seismic events. Ores formed as vein fill of second-and third-order shears and faults, particularly at jogs or changes in strike along the crustal fault zones. Mineralization styles vary from stockworks and breccias in shallow, brittle regimes, through laminated crack-seal veins and sigmoidal vein arrays in brittle-ductile crustal regions, to replacement- and disseminated-type orebodies in deeper, ductile environments (i.e., a continuum model). Most orogenic gold deposits occur in greenschist facies rocks, but significant orebodies can be present in lower and higher grade rocks. Deposits typically formed on retrograde portions of pressure-temperature-time paths and thus are discordant to metamorphic features within host rocks. Spatial association between gold ores and granitoids of all compositions reflects a locally favorable structural trap, except in the case of the intrusion-related gold deposits where there is a clearer genetic association. World-class orebodies are generally 2 to 10 km long, about 1 km wide, and are mined downdip to depths of 2 to 3 km. Most orogenic gold deposits contain 2 to 5 percent sulfide minerals and have gold/silver ratios from 5 to 10 and gold fineness >900. Arsenopyrite and pyrite are the dominant sulfide minerals, whereas pyrrhotite is more important in higher temperature ores and base metals are not highly anomalous. Tungsten-, Bi-, and Te-bearing mineral phases can be common and are dominant in the relatively sulfide poor intrusion-related gold deposits. Alteration intensity, width, and assemblage vary with the host rock, but carbonates, sulfides, muscovite, chlorite, K-feldspar, biotite, tourmaline, and albite are generally present, except in high-temperature systems where alteration halos are dominated by skarnlike assemblages. The vein-forming fluids for gold deposits in metamorphic environments are uniquely CO 2 and 18 O rich, with low to moderate salinities. Phanerozoic and Paleoproterozic ores show a mode of formation temperatures at 250° to 350°C, whereas Late Archean deposits cluster at about 325°to 400°C. However, there are also many important lower and higher temperature deposits deposited throughout the continuum of depths that range between 2 and 20 km. Ore fluids were, in most cases, near-neutral pH, slightly reduced, and dominated by sulfide complexes. Globally consistent ore-fluid δ 18 O values of 6 to 13 per mil and δD values of –80 to –20 per mil generally rule out a significant meteoric water component in the gold-bearing hydrothermal systems. Sulfur isotope measurements on ore-related sulfide minerals are concentrated between 0 and 10 per mil, but with many higher and much lower exceptions, indicating variable sulfur sources and an unlikely dominant role for mantle sulfur. Drastic pressure fluctuations with associated fluid unmixing and/or desulfidation during water/rock interaction are the two most commonly called-upon ore precipitation mechanisms. The specific model(s) for gold ore genesis remains controversial. Although the direct syngenetic models of the 1970s are no longer applicable, the gold itself may be initially added into the volcanic and sedimentary crustal rock sequences, probably within marine pyrite, during sea-floor hydrothermal events. Gold transport and concentration are most commonly suggested to be associated with metamorphic processes, as indicated by the volatile composition of the hydrothermal fluids, the progressive decrease in concentration of elements enriched in the gold deposits with increasing metamorphic grade of the country rocks, and the common association of ores with medium-grade metamorphic environments. Gold deposits of typically relatively low grade, which formed directly from fluid exsolution during granitoid emplacement within metamorphic rocks, are now also clearly recognized (i.e., intrusion-related gold deposits), but there are limited definitive data to implicate such an exsolved fluid source for most gold deposits within orogenic provinces. The fact that orogenic gold deposits are associated with all types of igneous rocks is a problem to a pure magmatic model. Hybrid models, where slab-derived fluids may generate rising melts that drive devolatilization reactions in the lower crust, are also feasible. Although involvement of a direct mantle fluid presents geochemical difficulties, the presence of lamprophyres and deep-crustal faults in many districts suggests potential mantle influence in the overall, large scale tectonic event controlling the hydrothermal flow system.