Very limited literature is available relating to gas production from ultradeep (>9000 ft [>2700 m]) coal seams. This paper investigates permeability enhancement in ultradeep coal seams of the late Carboniferous and early Permian to Late Triassic Cooper Basin in central Australia, using a time-lapse pressure transient analysis (PTA) approach for a pilot well. The gas production history and three extended shut-in periods are used to construct the time-lapse PTA for the study well. A new approach is introduced to construct a permeability ratio function. This function allows the calculation of permeability change resulting from competition between the compaction and coal-matrix shrinkage effects.

Pressure transient analysis indicates that gas flow is dominated by a bilinear flow regime in all extended pressure buildup tests. Hence, reservoir depletion is restricted to the stimulated area near the hydraulic fracture. This implies that well-completion practices that create a large contact area with reservoirs, such as multistage hydraulically fractured horizontal wells, may be required for achieving economic success in these extremely low-permeability reservoirs. The permeability ratio is constructed using the slope of the straight lines in bilinear flow analysis. Because of uncertainty in average reservoir pressure, probabilistic analysis is used and a Monte Carlo simulation is performed to generate a set of possible permeability ratio values. The permeability ratio values indicate that coal permeability has increased during the production life of the wellbore because of the coal-matrix shrinkage effect. Permeability enhancement in this ultradeep coal reservoir has offset the effect of permeability reduction caused by compaction, which is beneficial to gas production.

You do not currently have access to this article.